Find or Sell any Parts for Your Vehicle in USA

1994 Yamaha V-max 600 Le Brake Rotor 8ab-25830-01-00 8ab-25830-02-00 on 2040-parts.com

US $20.00
Location:

Lake Crystal, Minnesota, United States

Lake Crystal, Minnesota, United States
Used Item - May Show Scuffs/Scratches from Normal Wear - Please look at ALL pictures
Brand:Yamaha Manufacturer Part Number:8AB-25830-01-00 8AB-25830-02-00 UPC:Does Not Apply

   Benny's Powersports  

WE ARE HERE TO HELP - PLEASE CALL US IF YOU HAVE ANY QUESTIONS - (507) 726-2808. 

*Follow us on Facebook at https://www.facebook.com/bennyspowersports.

You may be interested in our other eBay listings.

Part Description

1994 Yamaha V-Max 600 LE Brake Rotor 8AB-25830-01-00 8AB-25830-02-00

This item came off a 2001 Yamaha Mountain Max 700. It may fit many other years and models of Yamaha Snowmobiles.

Please Check Fitment BEFORE you purchase.  If you need help figuring out what part # you need for your vehicle, please contact us. 

ASSEMBLIES WHERE 8AB-25830-01-00 IS USED

*All parts are shipped exactly as they are pictured unless otherwise noted in description.

*All parts are inspected and deemed usable unless otherwise noted in description.

*Parts may require some cleaning and adjustments for proper installation.

*Engine parts should be properly cleaned and lubricated prior to assembly. 

*Used Carburetors should be cleaned and tuned before installation. 

*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC - (I will not be held responsible for part failure due to poor installation)

Part Fitment

You, "the buyer", are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. I will try to answer fitment questions to the best of my knowledge and resources.

Used Parts

The dictionary defines the word "used" as follows: "Not New, Previously Owned". With that being said, this is a "used" part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can't use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.  

Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered "wear parts" and cannot be guaranteed unless specifically stated in the description that they are good.

PLEASE LOOK AT EVERY PICTURE CLOSELY!

Engine/Motor & Carburetor Parts

** All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s). YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly  cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

** All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them. YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATOSTROPHIC ENGINE FAILURE – AND/OR PREMATURE ENGINE WEAR. Therefore, Benny’s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts.
 

Shipping

I ship Monday through Friday DAILY unless noted on my home page. I ship most of my items USPS Priority or First Class Mail 1-5 days delivery in the US. Larger items will go FedEx ground 1-5 days delivery in the US. Very Large/Oversized items such as Fenders, Hoods, Etc. will be freighted via Greyhound Express to your closest terminal or can be picked up locally. Please be advised that over-sized items are subject to space availability on the Greyhound Buses so delivery is usually 7-10 days, but can sometimes take closer to 15 business days (3 weeks). Some over-sized items are able to fit under the USPS requirements and can be shipped directly for an additional charge. Please contact us if you would like to know if your item can be shipped directly to you and get a price quote. 

Shipping price stated is for the lower 48 states only. If you are in Alaska, Hawaii, Puerto Rico, Virgin Islands, or any other U.S. Territory, please contact me for shipping quote. Many small items will not need additional postage, but please ask for a quote first. If you purchase an item before receiving a shipping quote, please remember that any additional shipping charges need to be paid before your item will be shipped. Canada and International buyers are welcome but please contact me prior to bidding or buying so you understand the shipping costs. I will combine international shipping costs on multiple items.

Returns

We gladly accept returns. Please contact us before returning any item or there may be a delay in the refund of your payment.  You may contact us through eBay messaging or by phone (507) 726-2808. Items must be returned within 14 days of receiving the item. All sales after 14 days are considered final. Return shipping is paid by the buyer. The buyer accepts a 20% restocking fee or the equivalent of our original shipping costs plus fees if that amount exceeds the 20%.  (Please understand that even though a listing may have offered Free Shipping, we are still charged by the courier. As such our shipping cost will be deducted from the refund if they exceed the 20%)


Electrical items are NON-RETURNABLE for 3 reasons.
#1 - People using the part for testing.
#2 - People installing them on an incorrect machine.
#3 - Our inability to re-test most electrical parts after they have been returned and the machine has already been torn down.
We will not re-sell anything that we can't assure our customers was in working order when they bought it.
  

International Buyers

All international bidders are welcome.  We ship most items via USPS Priority Mail to most countries and do not insure their ground service.  With higher priced or large oversized items we may have to use UPS or FedEx due to USPS limitations. This may cause higher shipping costs.  Please understand these extra costs on such items.  If an item does not have a shipping price for your country, please contact us and we can get you a quote.

Import Duties, Taxes, and Charges are not included in item prices or shipping costs.  These charges are the buyers responsibility.  Please check with you country's customs office to determine any additional cost before bidding or buying.  These charges are usually collected by the delivery shipping company or when you pick up your item.  These are not additional shipping charges.

We will NOT mark values lower or mark as gifts - US and International Government policies prohibit such actions!

Feedback and 5 Star Ratings

Benny's Powersports is a small family owned and operated business.  We work very hard to establish and keep a good reputation, and customer service is our #1 priority. We have no interest in short changing anyone in any way at all. With that being said, we are human and do make mistakes. If you feel you cannot leave 5 stars and good feedback for ANY reason, please give us the opportunity to make it up to you. Call us at (507) 726-2808 or email us with your issue. You are our VALUED customer and we will not take you for granted.


 

Scuola Politecnica di Design announces Chris Bangle workshop

Mon, 13 Jul 2009

Italy’s Scuola Politecnica di Design has announced a seven-day workshop with former BMW Group design boss Chris Bangle at its campus in Milan. Themed ‘Future Personal Emotional Mobility’ and scheduled to run from 18 to 24 September 2009, the workshop invites design degree graduates and experienced car designers to take part in a project to create a new breed of sustainable shared transportation for the year 2050. Based on the concept that the mass migration of people from the countryside to cities will in the future create even more social, economic and ecological differences between population zones, this event will see attendees work closely with Bangle towards designing systems that engage on an emotional as well as an economic level, satisfying the personal transportation needs – and desires – of a disparate global population while minimising impact on the environment.

Hyundai dealers to inspect, repair Sonatas prone to wandering

Wed, 17 Aug 2011

Hyundai Motor America said its U.S. dealers will fix a steering problem found in some 2011 Sonata sedans after more than 4,000 owners complained about the car's steering system. Drivers have complained that the 2011 Sonata is prone to drifting or pulling to the left while being driven.

Audi A8 W12 LWB (2010): the first official photos

Fri, 16 Apr 2010

By Tim Pollard First Official Pictures 16 April 2010 10:31 Audi today announced the new long-wheelbase A8 L. Due to be unveiled at the 2010 Beijing motor show, the stretched Audi A8 will be popular with the chauffeur crowd and the extra 130mm in the wheelbase liberates oodles of space for back-seat loungers, judging by these first official photos.The new A8 L now tops 5267mm in length and Audi points out that makes it longer and wider than any of its LWB rivals.The new W12 spec Audi A8It's excess all areas with the new A8 L – Audi's previewed it with the group's W12 petrol engine. It's now 6.3 litres in capacity, fitted with FSI direct injection and develops 493bhp and 461lb ft.