Find or Sell any Parts for Your Vehicle in USA

406 Sbc Drag Racing Engine on 2040-parts.com

US $7,190.00
Location:

Coin, Iowa, United States

Coin, Iowa, United States
Condition:Remanufactured Brand:Chevrolet

Built by REHER MORRISON

Engine had about 250 passes on it and was torn down and freshened last spring with new rod and main bearings, rings, front and rear main seals, all new gaskets and valve springs. 

Engine was ran in a 2820lb Super Street car in Division 5 and consistently ran 10.90 @ 136-138 mph on the throttle stop.


GM 184 HD "Bowtie" Block

Splayed 4-bolt Mains

Eagle 4340 Forged Crank

Eagle 4340 H-Beam Rods

JE Forged Aluminum Dome Pistons

Crane Cam  Lift: .630 intake, .630 exhaust

                    Lobe Separation: 106

                    Duration: 284 intake, 292 exhaust

Cloyes Hex-a-Just Double Timing Chain

Cloyes Timing Cover

Crane Solid Roller Lifters

Reher Morrison Push Rods

ARP Head Studs

Moroso Deep Sump Oil Pan with Crank Scraper and Windage Tray

Brodix Track 1x Cylinder heads

             Ported and Polished by Rons Porting Service

             Del West Titanium Valves:   2.100 intake, 1.600 exhaust

             Comp Cams 220# Dual Valve Springs

             Brodix T&D Shaft Rockers 1.60 intake, 1.50 exhaust

Brodix HV 1000 Intake Manifold

ATI Super Damper

Dedenbear Electric Water Pump

MSD Crank Trigger and MSD Distributor

TCI High Torque Starter

Stahl Pattern Header Adapters

Excellent drag motor that is deadly consistent.  Good fit for Super Street but makes a great bracket motor as well.  Ready to go just add a carburetor.  The build sheet in the pictures shows all assembly and most of the parts that were used to build this engine EXCEPT the block and the cylinder heads.  I provided these to Reher Morrison and are not reflected in the price on the build sheet.

I have many more photos that I will provide upon request

Buyer will be responsible for shipping or pickup.  I will put the engine in a cradle and bolt it to a pallet and crate it.  I have access to a dock and forklift if pickup from a business provides a cheaper rate.  I will deliver within a 150 mile radius of southwest Iowa for a fee.

Thanks for looking and please feel free to contact me with any questions you might have.  I will gladly provide all the information and pictures I can.

Phone number:  712-246-9877

                          5am-7pm please text

                          7pm-  call or text

                          email anytime




                            


Zagato TZ3 Stradale pays tribute to Alfa Romeo with Dodge

Thu, 28 Apr 2011

Styling house Zagato's tribute to the 100th anniversary of Alfa Romeo began with the release of its one-off TZ3 Corsa in 2009 and will end with the unveiling of its version of theTZ3 Stradale this year. Less than a month after we learned that Zagato was working on its new TZ3 Stradale, the company has released the first photos and details of the car alongside its Corsa cousin. While the TZ3 Corsa was more of a track car, the TZ3 Stradale is an avant-garde tribute to the Alfa Romeo and Zagato's street-legal heritage.

Lamborghini Gallardo (2012) new Spyder and Super Trofeo racer

Thu, 18 Oct 2012

Lamborghini has pulled the wraps off a facelifted version of the Gallardo Spyder, just a couple of weeks after showing the restyled coupe at the 2012 Paris motor show. We've also been given our first look at the revamped Super Trofeo racer, which gets similar styling tweaks and an improved aero package. First up, the facelifted soft-top Lambo Or, to give the car its full moniker, the Lamborghini Gallardo LP560-4 Spyder.

Ford F-150 gets upgrades for 2012

Thu, 29 Sep 2011

A 36-gallon fuel tank leads the changes on the 2012 Ford F-150 pickup, which makes for a range of 756 bladder-busting miles without filling up. The FX trim gets a new appearance package, and the availability of a locking rear axle is expanded. The engine lineup is unchanged from that of the 2011 model, with six-speed automatic transmissions as standard equipment.