Find or Sell any Parts for Your Vehicle in USA

90919-01210 Set Of 6 Genuine Toyota/lexus Spark Plugs Denso Sk20r11 3297 on 2040-parts.com

US $42.00
Location:

Sunnyvale, California, United States

Sunnyvale, California, United States
Condition:New Brand:AutoExtra/DENSO Surface Finish:Iridium Manufacturer Part Number:90919-01210, 9091901210 Warranty:Yes Interchange Part Number:SK20R11 3297

This item can be interchanged to the following OEM part#: 

90919-01210 / 9091901210

Denso#: SK20R11 / 3297


Parts Information: Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number.

Shipping Details: We will ship to most US States with USPS Priority or first class mail service; Canada and other countries will be international rate with 7-14 days first class mail service.

Returns: We offer a 30 days return policy FROM DATE OF PURCHASE on this item. Items must be returned in new condition with original packaging. All returns due to our error will receive a full refund, including shipping. All other returns will incur a 20% restocking fee and no reimbursement of shipping fees. 

Warranty: We offer LIFE TIME WARRANTY on this parts! Warranty is for REPLACEMENT of the parts only. If there is a problem with the item please notify us prior to altering or installing the item. Altered, abused, or improperly installed/maintained items will void the warranty and are not returnable. Warranty is not transferable. Warranty does not cover shipping, labor, towing, rentals, storage, legal fees, lost wages or any other incidental fees.


=====For=====Your=====Information=====

Know about the Gaping Iridium Power spark plug:

Before attempting to gap any Iridium Power spark plug, please review the specification chart in the front of this catalog to verify the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with small variations in the factory set gap the ultra-efficient firing power design will compensate for those small variations.

Should you decide to re-gap your Iridium Power plug, use extreme caution as improper gapping may damage or destroy the Iridium center electrode or porcelain center.

To increase the gap size:

Step 1: Use needle nose pliers or spark plug gapping tool to bend the ground strap up to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN.

Step 2: Re-check the gap with a calibrated gapping tool.

To decrease the gap size:

Step 1:Use the same method as above, however bend the ground strap down to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN.

Step 2: Re-check the gap with a calibrated gapping tool. WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.

WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.


Know about the spark plug Installation:

Installation Key Points:

1. The threaded area of the cylinder head must be clean.

2. Using your fingers, screw the spark plug into the cylinder head, and tighten about 1/4-1/2 turn with a plug wrench. (Taper seat plug: about 1/16 turn)

3. Tightening too much may cause distortion of the plug housing, and in extreme cases could cause engine damage. Therefore, proper installation of the spark plug is important for life and performance of the spark plug.

Plug SizeCast Iron HeadsAluminum Heads
N*mlb-ftN*mlb-ft
10mm Flat Seat10-157-1110-157-11
12mm Flat Seat15-2511-1815-2511-18
14mm Flat Seat35-4026-3020-3015-22
14mm Taper Seat9-207-159-207-15
18mm Flat Seat43-5232-3838-4628-34
18mm Taper Seat20-2715-2020-2715-20


Note: The installation torque values shown above apply to new spark plugs without lubricating the threads. If threads are lubricated, the torque value should be reduced by approximately 1/2 to avoid over-tightening. 
* 1N*m = 0.1020 kgf*m 


Installation Procedure: 

Whenever possible it is recommended that the spark plug should be installed by using a torque wrench. If a torque wrench is not available, tighten in the following manner. 
FLAT SEAT PLUGS
Finger TightFlat Seat


TAPER SEAT PLUGS
Finger TightTaper Seat

Dream – Cars of the Future Since 1950

Fri, 28 Nov 2008

The city of Turin has been celebrating as World Design Capital 2008 this year with a series of over 200 separate events and exhibitions. One of the highlights has been a series of three themed shows running throughout the year, entitled '20th Century', 'Speed' and 'Dream'; the final exhibition of this trilogy. Housed at the Giovanni Agnelli Espositione - the wonderful Nervi-designed hall on Corso Massimo D'Azeglio that used to host the Salone di Torino in the 1950s - 'Dream' is a fabulous exhibition but, regrettably, one that hasn't been well publicized outside of Turin city.

Monterey auction kicks off with woodies sale

Fri, 14 Aug 2009

The Sports and Classics of Monterey auction is in full swing, and a collection of classic woodies netted $7 million Thursday. The Nick Alexander Woodie Collection featured 51 pristine pre- and postwar Ford and Mercury wood-bodied station wagons. The event was staged by RM Auctions in advance of the Pebble Beach Concours d'Elegance.

Classic Camaro, Chevelle and Nova factory documents emerge

Mon, 31 Mar 2014

If you own a classic Camaro, Chevelle, or Nova, getting a missing piece of history on your car is about to get a little easier. The National Corvette Restorers Society has announced that they will begin selling shipping records for these three models made between 1962 and 1972. That might not seem like a huge date range, but it covers a pretty large sweet spot in terms of these nameplates' popularity and collectibility.