Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t)

Atomizer Boat Wrap - Customized for your boat

Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide
the year, make, model, length of your boat and a side shot picture as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours.
All products made on site.

Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor.

Your graphics color may vary slightly from what you see depending

on you monitor Setting.

(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat wrap by Wraps For Boats

Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

Mockup for proofing
7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.

YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

** 3b. If you want your boat wrap to go up over the rubrail into the gunwales, or if you want the bow or stern wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can use the below diagram as a reference to ensure your wrap fits and presents itself the best.

Dimensions needed for rear of boat wrap
Below shows the wrap up over the rubrail. This is an option that costs more. Call or email for quotes.
Shows Wrap Above the Rubrail

We have many variations of our graphics and also provide custom colors upon request.
If you have any questions, Please don't hesitate to call.

Campaign Group Calls For Halt To 20mph Roll Out

Fri, 29 Aug 2014

CAMPAIGN group Alliance of British Drivers (ABD) is calling for Government to halt the roll out of 20mph zones following further increases in 20mph accidents. The organisation has also questioned the motivation of proponents who continue to advocate a national roll out of 20mph zones, despite an ongoing Government investigation and claims of increased recorded accident statistics in current 20mph zones. In a recent survey of its members: 95% of Alliance of British Drivers' members believe that the roll out of 20mph zones and limits should be halted pending Government research into increased casualty statistics in current zones.

BMW – Set to be the UK’s favourite car!

Sat, 23 May 2009

BMW's ConnectedDrive will provide in-car weather forecasting and mapping [ad#ad-1] In a move that seems designed to pamper to the British obsession with the weather, BMW has announced that they are to fit Michael Fish in to new BMWs fitted with ConnectedDrive! Actually, they’re not really fitting Michael Fish as he’d probably get it wrong, but the new BMW weather forecast system is going to be able to supply weather forecast and precipitation data to drivers on the in-car screen. It’s inevitable that as the technology in cars becomes more sophisticated, and more cost-effective, we will get increasingly sophisticated systems at our disposal.

2013 Mazda 6 from £19,595: Paris 2012

Thu, 27 Sep 2012

Prices for the 2013 Mazda6 have been revealed at the Paris Motor Show. Starts at £18.595 and on sale January 2013. The entry point for the new Mazda6 is the 143bhp 2.0 litre petrol in SE trim with a six-speed manual box which will set you back £18,595, rising to £28,045 for the top of the tree 2.2-litre 175ps Tourer Sport Auto Nav.

Atomizer Boat Wrap - Customized For Your Boat on 2040-parts.com

Atomizer Boat Wrap - Customized for your boat

Decals for Sale

Campaign Group Calls For Halt To 20mph Roll Out

BMW – Set to be the UK’s favourite car!

2013 Mazda 6 from £19,595: Paris 2012