Factory Oem Toyota Lexus Scion Scan Tool Diagnostic Tester on 2040-parts.com
Washougal, Washington, US
Diagnostic Tester / Mastertech Diagnostic Tester / MastertechThe Diagnostic Tester / Mastertech platform was the Toyota/Scion/Lexus factory scantool from 1993 to 2007. Our next generation scantool, TIS techstream, was released in 2007. While we no longer release software updates for the Diagnostic Tester / Mastertech platform, it offers full functionality on 1989 to 2007 model year vehicles.For additional information on TIS techstream please click here.Scantool DiagnosticsThe Toyota Diagnostic Tester is no longer supported and replacement parts are not available from Toyota. The last Software release for the Toyota Diagnostic Tester was version 14.1 and was issued in April 2007. Version 14.1 will provide diagnostic support through the 2007 Model Year and reprogramming support for calibration files released up to April 2007.Vehicle ReprogrammingThe Toyota Diagnostic Tester scantool can be used for all flash reprogrammable Toyota/Scion/Lexus ECMs, 2001 through April 2007. The Diagnostic Tester Scantool is not recommended for service reprogramming operations introduced after April 2007.Toyota/Scion/Lexus ECMs can be reprogrammed using either the Toyota/Scion/Lexus factory scantool, or the Vetronix Mastertech scantool. The ECM reprogramming function is only available with the authentic Toyota factory scantool software which runs on either of the above mentioned scantools. Scantool software version requirements are specified in applicable Technical Service Bulletin (TSB)/Service Communication (SC) documents, which can be accessed with a subscription to this website.Vehicle recalibration using this scantool requires use of the following:Personal computer running Microsoft Windows 7 or Windows XP operating systemToyota Diagnostic Tester or Vetronix Mastertech Scantool with Toyota factory softwareToyota/Lexus factory scantool program cardPC Interface Cable (P/N 01001090) to transfer data from PC to scantoolECU calibration files (available through this site)Caution:The diagnostic tester does not support reprogramming of calibration files released after April 2007. Permanent ECU damage may occur. Please refer to Service Bulletins for correct reprogramming procedures.
Factory Toyota Lexus Scion scan tool. Reprogram, advanced diagnostics, program keys, all from this oem device.
This was purchased from a Toyota dealership new late 2007. Retails for around $5000. It has the last software update available. Advanced support for models up to 2008. It will work on newer vehicles, but in a reduced capacity.
Additionally, it has a generic obd 2 support for any vehicle. Connectors for dlc 1 and dlc 2 allow the scanner to work with older Toyota and lexus obd vehicles.
The scanner was rarely used, and mostly just stored in the factory case. It is very clean, and even still has the original screen protector on.
This would be a great tool for the home enthusiast, to the automotive shop owner.
Diagnostic Tools / Equipment for Sale
Mac tools otc lcd self contained spark plug kv voltage tester burn kv burn time(US $89.99)
Otc 7211 fuel pressure test gauge(US $0.99)
Equus innova 3100 check engine light w/ abs trouble code scanner cel diagnostic(US $84.99)
Multiscan audiometric diagonistic tool in plastic case(US $5.00)
Actron cp9580a enhanced autoscanner plus with obd11 abs can & codeconnect(US $179.98)
Snap-on tools vantage pro test meter digital graphing **only used on 10 cars**(US $999.99)
Saab production starts – 2010 Saab 9-5 first off the line
Mon, 22 Mar 2010The 2010 Saab 9-5 is first off the restarted Saab production Line It’s been a long and sometimes fraught road back to production for Saab. Almost sinking in to oblivion after GM decided to wind it down after failing to secure a buyer who would jump through the required hoops, Spyker is now in control and production has restarted at Trollhatten. It is true that we did report Saab 9-4x production had started back in January, but that was just a limited number of cars for evaluation and crash testing and was prior to the Spyker deal completing.
Ford Focus ECOnetic (2010) revealed at Frankfurt
Wed, 16 Sep 2009Ford has revealed the 2010 Focus ECOnetic at Frankfurt For the first time Ford has made Start-Stop an option, which was something we thought should be added to the Fiesta ECOnetic when we had it. The Focus ECOnetic also benefits from Smart Regenerative Charging and something called Tension FEAD (no, we had no idea either, but apparently it reduces friction) which help make the new ECOnetic Focus more economical and less polluting. With Stop-Start fitted to the 1.6 litre Duratorq TDCi the Focus manages to hit the magic 99g/km mark.
Citroen C5 – Model range & new engines
Mon, 09 Nov 2009Citroen has added two new engines and tweaked the C5 range The Citroen C5 is a better car than you’d think. It manages to differentiate itself from the German competition – mainly with its different driving dynamics. With its hydroactive suspension it is comfortable in a way no German saloon ever could be, without giving away too much in the handling stakes.