Find or Sell any Parts for Your Vehicle in USA

Ford 460/422hp Crate Engine By Tuff Dawg Engines on 2040-parts.com

US $3,995.00
Location:

Phoenix, Arizona, US

Phoenix, Arizona, US
Returns Accepted:ReturnsNotAccepted Warranty:Yes

FORD 460/422HP
Hi Performance Balanced Engine

FREE professional crating and shipping in
the contiguous US when you "Buy it Now"!
International shipping available please contact us!

This Ford 460 crate engine by Tuff Dawg Engines would be EXCELLENT for a car, street rod, pickup, or your daily driver (engine comes with front sump oil pan so if it is going into a 4x4 the oil pan would need to be changed). Remove that old worn out Ford 460 and install this 422HP Ford 460 crate engine by Tuff Dawg Engines to bring your ride to life! This Ford 460 would be perfect for hot rod, daily driver or pickup with a good all around powerband. This engine will run on leaded or unleaded Premium fuel. Works best with 2000 stall speed torque converter or can be used with stock stall speed converter (not included) and comes with a new automatic transmission flexplate.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

  • 3.850" stroke cast iron crank
  • 6.605" big beam forged rods with ARP rod bolts
  • 9 to 1 compression pistons

More special features of this engine include:

  • Seasoned 2-bolt main block, vatted, magnaflux checked for cracks, thermal cleaned, steelabrated, bored and honed and plateau honed to fit new pistons
  • Deck head gasket surface on block to ensure a good seal
  • New CompCams Hydraulic flat tappet cam with .513"Int/.520"Exh valve lift
  • New 2.080"Int/1.650"Exh valves
  • Both heads resurfaced to ensure a good leak free seal
  • New Hardened exhaust seats for use with leaded or unleaded fuel
  • New 1.440" high performance springs set up to match cam
  • New Spiral-type valve guides for better oil retention
  • New High temperature valves seals
  • New Hardened push rods
  • New Rocker arms
  • New Perfect Circle rings
  • New Double row timing set
  • New Oil pump with steel drive shaft and bolt on oil pickup tube
  • New Brass expansion plugs
  • New Edelbrock Performer RPM aluminum intake manifold. This dual plane intake constant cross-sectional area design builds low end and mid-range acceleration while optimized runner path make top-end hp
  • This engine takes a square bore carb. It works best with a 750cfm carb (not included)
  • All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with oil pan, timing cover, harmonic balancer, valve covers, and Edelbrock intake manifold. We even supply a new a/t flexplate with this engine.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)

If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST

Current Phoenix Time

NOTE: Arizona does not observe Daylight Savings Time
or enginebuilder_1(at)yahoo(dot)com.


Here at D&J MACHINE & PERFORMANCE ENGINES we have over 38 years experience in building top quality affordable, streetable, performance engines.


Purchase:

"Buy it Now" for $3995.00. AZ residents add 8.3% tax. No core required!

Shipping:

Residents of the contiguous United States will get FREE shipping to your home or business address that is accessible by a tractor trailer rig! This is a retail savings of $200.00 to $600.00 in professional crating and shipping costs!

International shipping available, please contact us. D&J Machine will not be responsible for any customs delays or fees. ALL tariff and tax charges are the responsibility of the purchaser!


TERMS OF PAYMENT:

  • VISA, MASTERCARD, DISCOVER, AMERICAN EXPRESS
    • We are able to take your credit card orders over the phone!
      Just call (602) 395-0800 Mon-Fri 8:00am - 5:00pm MST
  • PayPal
    • If you are already a verified member of PayPal you may use this convenient method of payment
      Note: Can take 3-4 days to become verified for large ticket items
    Pay me securely with any major credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    Visa MasterCard Discover American Express eCheck

    Not what you are looking for?
    Please check out our other Auctions!

© D&J Machine & Performance Engines 1974 - 2012. All rights reserved
TuffDawgLogo ™ pending

Freelander 2 hits 200,000

Sun, 23 May 2010

Land Rover Freelander 2 - 200,000 built The original Freelander was, for a car that was pretty much cobbled together from the Rover parts bin, a remarkable success. Sadly, it wasn’t a remarkable car, particularly with the K Series engine many Freelanders had succumbing to head gasket failures. It could have been so different.

2012 Mercedes A-Class: The Concept-A Videos

Sat, 09 Apr 2011

Mercedes Concept-A Video We had the first proper details on the Mercedes Concept-A earlier this week, which points the way – as a slightly tamed-down version – to the 2012 Mercedes A-Class. That Mercedes A Class will not just arrive as a hatch but will – in cojunction with the new Mercedes B-Class that will also utilise Mercedes new MFA platform – spawn models as diverse as a shooting brake, crossover, coupe and cabriolet. It seems – with all the derivatives that appear to be planned – that Mercedes are looking to out-MINI MINI in the variations on a theme game.

Nissan 370Z Nismo vs Wingsuit – Nissan try to be Top Gear

Tue, 01 Oct 2013

Nissan 370Z Nismo Vs Wingsuit That was five years ago, so Nissan obviously feel enough time has passed to plagiarise Top Gear’s stunt without too much criticism, so they’ve decided to pit a man in a wingsuit – who isn’t Red Devils – against a man in a car that isn’t a Porsche. So we have Peter Pyzera - Germany’s 2012 Nissan GT Academy Champion – in a 370Z Nismo blatting his way down Switzerland’s Susten Pas as it falls 4,501 feet and BASE jumper Dave Barlia in a wingsuit doing the same. Peter Pyzera said after the stunt: That was absolutely amazing, I could see Dave up above me and I just had to concentrate and get in the zone to beat him down.