Buy Half Jacket Boat Wrap - * Choose Your Color * Customized for Your Boat in Naples, Florida, United States, for US $695.00

Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t)

Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.

Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor.

Your graphics color may vary slightly from what you see depending

on you monitor Setting.

(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat Wrap by Wraps on Boats

Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

** 3b. If you want your boat wrap to go up over the rubrail into the gunwales, or if you want the bow or stern wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can use the below diagram as a reference to ensure your wrap fits and presents itself the best.

We have many variations of our graphics and also provide custom colors upon request.
If you have any questions, Please don't hesitate to call.

Aston Martin US dealers could lose DB9 & Vantage – which could see many shutting up shop

Sun, 17 Aug 2014

The Aston Martin V12 Vantage S Roadster (pictured) might not make the US The rules and regulations car makers have to conform to are both enormous and onerous, and different markets have different regulations. And it looks like new side impact regulation could scupper AML’s sales in the US. New side impact rules – due to come in to force in the US in September – means that two of Aston Martin’s big sellers – the DB9 and Vantage V8 and V12 – would have to be withdrawn from sale in the US as they won’t comply.

Aston Martin Hybrid Hydrogen Rapide S race car revealed

Fri, 12 Apr 2013

The new Aston Martin Rapide S was revealed in January, and now Aston Martin are taking the Rapide S racing, but with a twist – it’s going to be able to run on hydrogen. Aston Martin has been working with hydrogen experts Alset Global and have developed a twin turbo version of their 6.0 litre V12 that can run on petrol, gaseous hydrogen or a blend of both and the plan is to run the Rapide S at the 24 Hours of Nürburgring next month with at least one lap run on hydrogen alone. The hydrogen system in the Rapide S (which AM are calling a hybrid, but it’s only a hybrid in the sense it uses two fuels, not that it uses electric motors) has a hydrogen fuel rail, storage tanks and its won engine management system to control combustion.

Chrysler Sebring and Dodge Avenger to get a new lease on life

Mon, 28 Sep 2009

With Fiat-based replacements still at least two years away, the Chrysler Group has delayed plans to kill its slow-selling Chrysler Sebring and Dodge Avenger, sources say. The two sedans were all but left for dead by previous owner Cerberus Capital Management. Now insiders say Chrysler intends to freshen the cars and keep them on the market until late 2012.

Half Jacket Boat Wrap - * Choose Your Color * Customized For Your Boat on 2040-parts.com

Decals for Sale

Aston Martin US dealers could lose DB9 & Vantage – which could see many shutting up shop

Aston Martin Hybrid Hydrogen Rapide S race car revealed

Chrysler Sebring and Dodge Avenger to get a new lease on life