Find or Sell any Parts for Your Vehicle in USA

Kawasaki Jet Ski Jetski Js 440 550 650 750 800 Jre Universal Sponsons Skegs Fins on 2040-parts.com

US $72.00
Location:

Northwest Washington, US

Northwest Washington, US
Returns Accepted:Returns Accepted Item must be returned within:14 Days Refund will be given as:Money Back Return policy details:-All returns must be pre-approved by Fresh Watercraft and accompanied by a Returned Goods Authorization (RGA) -Invoice must accompany all returns -No returns whatsoever on electrical parts, service manuals, tools or special orders (New or used) -No refunds on shipping charges unless as a direct result of a Fresh Watercraft error -20% restocking fee on all returned parts unless as a direct result of a Fresh Watercraft error -Parts must be returned unused and in the same condition as when purchased -No returns on parts under $15.00. -No returns after 14 days from date of purchase. Return shipping will be paid by:Buyer Restocking Fee:No Warranty:No Part Brand:Jet Race Engineering

 

 

BRAND NEW!!!

STAINLESS STEEL

UNIVERSAL PWC SPONSONS!!!

 

Will fit almost any personal watercraft

in a variety of mounting locations

 

Made from Marine Grade Stainless Steel!!!

 

Here we have a set of two, brand new stainless steel sponsons (skegs / sponsens / fins / rudders) for a personal watercraft or Jet Ski.  Manufactured by JET RACE ENGINEERING (JRE), these sponsons are made from 14 gauge stainless steel (in highly corrosion-resistant 316 marine alloy), with a brushed #4 finish.  The JRE logo has been laser etched into both the left and right sponson.  Can be adapted to almost any stand-up or sit-down style watercraft, by mounting either under the bond line, or fastened directly to the hull (see photos).

On stand-up style watercraft, JRE universal sponsons will give your ski much better cornering and straight-line tracking during higher speeds, while on sit-down style craft, they help with pulling towables and hard turning. You will be able to lean into the turn for a safer, more natural carve instead of leaning out in the turn's opposite direction. Depending on where you mount them, JRE universal sponsons will provide a little extra lift at the rear of the hull which will help keep the nose down, greatly reducing porpoising. You will be able to turn sharp and fast without spinning out and you can still make nice clean sweeper turns.

Sponsons can be attached to either the bond line / gunwale or lower hull using stainless nuts / bolts, rivets or self tapping screws (hardware not included).  Wherever you mount them, you will notice a huge difference and better all around handling of your watercraft.  Includes a full set of installation instructions.  Grab a set before they're GONE!!!!

 

 

 

Have questions about PWC or Jetski parts? 

Please click HERE to Email Fresh Watercraft!!

 

 

 ABOUT US

 

Fresh Watercraft is a personal water craft (PWC) performance company, located just minutes from the United States/ Canada border.  We have a facility in Northwest Washington State, USA as well as the Lower Mainland of British Columbia, Canada.  We ship new and used Jet Ski parts domestically and internationally 5 days per week.

 

As a dealer for some of the premier names in the Watercraft aftermarket such as Skat-Trak, SBT (Short Block Technologies), and Hydro-Turf, we can also buy at dealer pricing levels with companies like Blowsion, Jet Dynamics, Ocean Pro, Factory Pipe, Dennis Kirk, Coffman’s Exhaust and Jetinetics. 

 

Fresh Watercraft is also the exclusive North American warehouse distributor for high-end billet parts manufacturer JRE (Jet Race Engineering).  JRE started out making technical CNC billet parts for large corporations like Disney, Comcast and Boeing, but later set their sights on the highly-under-served retro standup Jet Ski market.  This focus now has JRE manufacturing some of the highest quality PWC performance parts in the world.

 

We take great pride in our customer service and shipping speed, and look forward to assisting you with any of your new or used PWC parts needs.  We always have hundreds of watercraft parts in stock that are not currently listed in our e-store, and when we don't have it we can usually either source it, or direct you where to get it.  So if there are any parts you might be interested in but do not see listed, please don't hesitate to contact us.  We are available Monday through Saturday for parts inquiries and technical service phone calls, as well as 7 days a week for email support.

 

Our international freight costs and shipping speeds are the best in the business.  You won’t find a more comprehensive overseas shipper of new or used PWC parts anywhere in the world.  We look forward to helping you get back on the water!!

 

SHIPPING

 

Shipping costs for American, Canadian, and International destinations are specified in our e-store listings 99% of the time.  Simply scroll down to the "Shipping and handling" section, and input your country.  The exact freight cost for shipping any given part to your country be listed.   However, some items are too large/heavy for a flat international rate to be applicable, so if you do not see a rate listed for your country, please contact us and we will be happy to source a shipping quote for you.

 

CARRIERS

 

Items shipping to United States destinations are shipped via United States Postal Service, FedEx Ground or UPS Ground (At the discretion of Fresh Watercraft).  Alternate carriers will be considered on a by-request basis.  Items shipping to Canadian destinations are shipped via Canada Post Expedited Parcel, or Greyhound Package Express.  Items shipping to International destinations are shipped via USPS International Airmail.  Shipping to Post Office boxes (P.O. Box) are no problem, and we do not have any kind of shipping or handling surcharge for international or domestic destinations.

 

COMBINED SHIPPING

 

We are more than happy to combine shipments on any combination of items, whether from an auction, e-store items, or best offer listings.  We simply ask shoppers to “Buy-it-now” any item(s) they want, but do not make a payment.  Simply contact us when you are done shopping, and we will then send you out a single invoice, with all the items on it plus one shipping charge.  We only charge actual freight, and never ever charge a handling fee.

 

WARRANTY

 

-Manufacturer’s warranty on new parts only, to a maximum of 1 year

-Used parts are considered “As-is,” and are final sales.  Used parts carry no warranty coverage whatsoever

-Returns/exchanges on used parts are only accepted due to an error in the listing on the part of Fresh Watercraft

-Invoice must accompany all claims for warranty

-Merchandise must be returned to Fresh Watercraft unused and in the same condition as when purchased

-Warranty on moving parts applies only when new fluids, filters, seals, and/or gaskets are used with installation of part

 

NON-WARRANTY

 

-Return shipping costs

-Purchaser's inconvenience, loss of time, loss of use of watercraft, and/or towing expense

-Installation expense, commercial loss or consequential damages

-Fluids, gaskets, seals, filters, or other materials/parts used in the installation of a given component

-Claims that result from accident, abuse, neglect, alteration, improper maintenance or improper installation

-Parts installed in watercraft used commercially, or for racing

-Parts used in conditions that would contribute to abnormal wear (At the sole discretion of Fresh Watercraft)

-Parts used for other than original application

 

Note:  Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.  This warranty gives you specific legal rights and you may have other rights which vary from state to state and/or Province to Province.

 

SPECIALTIES

 

Fresh Watercraft specializes in Stand-up style Kawasaki Jet Skis. This includes JS400 (JS 400), JS440 (JS 440), JS550 (JS 550), 550SX (550 SX), 650SX (650 SX), 750SX (750 SX), 750SXi (750 SXi), 750SXi Pro (750 SXi Pro) and 800SXR (800 SX-R) models.  We also carry a large inventory of parts for Kawasaki runabout style craft, 2 and 3 passenger watercraft such as X2, TS (Tandem Sport), SC, ST, STX, ZXi, SS, STS, SSXi (Super Sport), XIR and Ultra 130 / 150 Jetskis.

 

Aftermarket parts specialties include:

-Mikuni and Keihin carburetors; Dual, single, SBN, CDK, etc.

-Skat-Trak, Solas, NuJet, and Jetlyne stainless steel impellers

-Intake and exhaust parts from Westcoast, PJS (Performance Jet Ski), Mariner, DG, Kerker and Bad Bones

-R&D, ADA (Advanced Distributing), Twist, Jetsport and Triton Cylinder heads

-Motor mounts and starters from Goki

 

Yamaha parts in stock for SuperJet, Wave Runner, Jammer, Raider, Blaster, Venture, FX-1, VXR, LX, and GP.

Seadoo parts in stock for SP, GT, XP, XPI, GTX, GTS, GTI, SPX, SPI, HX, XP800, GSX, and GS

 

RETURN POLICY

 

-All returns must be pre-approved by Fresh Watercraft and accompanied by a Returned Goods Authorization (RGA)

-Invoice must accompany all returns

-No returns whatsoever on electrical parts, service manuals, tools or special orders (New or used)

-No refunds on shipping charges unless as a direct result of a Fresh Watercraft error

-20% restocking fee on all returned parts unless as a direct result of a Fresh Watercraft error

-Parts must be returned unused and in the same condition as when purchased

-No returns on parts under $15.00.

-No returns after 14 days from date of purchase.

 

The customer understands that in making a purchase from Fresh Watercraft, there are no other expressed or implied warranties of any nature, and agrees to be subject to the above conditions.  All returns must be accompanied by a Returned Goods Authorization (RGA) number, which must be obtained via email or phone from Fresh Watercraft before any parts are returned.  If the RGA number is not written on the outside of the shipping box, the unopened package will be returned to the purchaser.  All returns must be postage paid; return shipping charges are not refundable.  All returns must be packaged properly, Fresh Watercraft carries no liability for returned product damaged as a result of improper packaging.  Fresh Watercraft will issue a refund or credit only for clean and unopened sealed parts, less shipping and 20% restocking and handling fee.  We appreciate your understanding, and thank you for your business.

 

Concept Group International (CGI) expands its reach into China

Thu, 19 Apr 2012

CGI is one of the European leaders in vehicle development technology and is increasing its client base by providing engineering services to Chinese automotive manufacturers. CGI is currently operating in China utilizing the capability of its strategic partners based on the mainland, allowing Chinese automotive manufacturers to benefit from CGI's expertise and its history in engineering and innovative design.  CGI has developed key partnerships with major automotive manufacturers based in the UK and Europe and is fully committed to generating similar relationships in China. By providing OEMs such as Bentley, Jaguar Land Rover, Nissan and Aston Martin with best-in-class quality and on-time delivery, CGI is now poised to further develop its presence in the Asian market.

One Lap of the Web: Packards -- Ask the man who knows way too much about one

Wed, 23 Apr 2014

-- For some light Wednesday reading, here's more information than you ever wanted to know about Packard. It includes the horrible neoclassics that plagued the 1970s, and the 1995 revival of the Packard name that attempted to stick a shortened rendition of the famous Packard grille in front of a 440-hp V12, all wrapped in a shape that looked like a melted Twix, as shown above. Our august associate editor Graham Kozak owns a Packard, so he could have filled us in on the details.

2012 Land Rover Defender gets new diesel

Fri, 12 Aug 2011

The 2012 Land Rover Defender gets a new, cleaner, 2.2 litre diesel engine It’s hard to decide what to do with a motoring icon icon like the Land Rover Defender. Do you keep on evolving it or do you have a radical re-think? All that’s up for discussion at Land Rover at the moment, with Project Icon taxing the brains of Land Rover’s best.