Sell new 2 way remote start stop motorcycle alarm with waterproof main unit in 深圳, 广东省, China, for US $76.00

Condition:New Brand:cardot Surface Finish:good Model:MT170A Warranty:Yes Manufacturer Part Number:MT170A Country/Region of Manufacture:China UPC:765276011487

NEW LCD two way motorcycle alarm system with shock sensor alarm and illegal start alarm long distance remote start stop engine

LCD remotes with vibration,audible,light alarm

Model No:MT170A

we won't send remote battery!product is made by cardot!

Product Basic Features:

1.sound arm or disarm

2.Finding the motorcycle by Remote

3.mute arm or disarm

4.Remote Engine Starter or Flameout Functions

5.learning button or ACC learning remotes

6.Shock Sensor sensitivity adjustable by remotes,1-5 grade sensitivity adjusted,factory is the 3rd grade

7.Low power consumption

8.waterproof main unit

9.AC engine off

10.super long distance remote control and long distance response alarm

11.microwave sesor can be turn on or off by remotes

12.siren pause;

13.ACC On alarm trigger when in arming;

14.Remote Anti-hijacking

15.power off memory

16.LED indication

17.auto-rearm enable or disable

18.emergency disarm without alarm remotes

19.arm reminding

20.Remote power status indication

21.time alarm setting

Technology Paramter:

A:Main Unit:

1)Maximum Working Current:>300mA;

2)Working Voltage:>12V;

3)Static Current:<3mA;

4)Working Frequency:433.92Mhz;

5)Code Mode:Learning Code;

B:Remote:

1)Working Voltage:<1.5V;

2)Battery Type:1.5VAAA;

3)Working Frequency:433.92Mhz

Product Real Photos:

Installation Instructions:

1.pink-gray wire:ignition off wire

normally speaking,as for AC engine off motorcycle,please find ignition mould trigger wire:start motorcycle,and use this gray wire

to touch every wire of ignition mould,if motorcycle ignition off,then it is right one wire.cut it and connect the gray wire to the

end of ignition mould,pink wire to the other end.

but as for DC engine off motorcycle,don;t need to connect pink engine off wire,it only has two wire,one is red wire,the other is

power door lock output wire,it is orange wire.you need to add one 12V DC relay swtich,one end of relay wire coil connects to power

door lock output wire,the other end of relay wire coil connects to gray engine off wire of alarm,puplic foot pin of relay switch

connects to supplying power foot of lock output power wire,and closing foot pin of relay swtich connects to power foot pin of start

ignition module,and then cut supplying power wire of ignition module.

2.orange wire:detect power door lock.

find the output power of lock,like positive of flasher or brake switch and connect them,4 turning light will blink if connection is

right.if you connect with negative of flasher or brake switch,turning light will light or automatically turn off when you press the

brake.please use this way to find right power door lock output wire.

3.blue wire:start wire.

if your motorbike is positive start mode,directly connects to control wire of start relay,but if your mobile is negative start

mode,need to change OEM wire connection to positive start wire connection mode or you can add one 12V DC relay swtich to alarm bule

wire,and then make a polarity switch.

4.yellow wire(2pcs):direction light wire.

Left and Right direction light has two wire,one wire connects to ground,the other wire is direction light control wire,connects to

direction light switch,connecting alarm yellow wires to control wire of left and right direction light,after finishing

connection,press unlock button of remote,if siren will sound bi-bi,direction light flashes,it means that your connection is right.

5.red wire:12V

directly connects it to positive pole of storage power.

6.black wire:ground

directly connects it to negative pole of storage power.in order to get better anti-theft,you can connects this black wire to

negative pole of other wire,it is hard to find it by thieves.

7.lastly,after finishing all connections,open power door lock,please test direciton light flash or not,shock alarm or not,remote arm/disarm work or not,if abnormal working,please check your connection again.

Holden Sportwagon Concept (2007): first official pictures

Mon, 15 Oct 2007

By Damion Smy First Official Pictures 15 October 2007 12:39 Sportwagon? Another marketing gimmick? Somewhat.

College Exhibition: Umea Institute of Design Degree Show 2004

Wed, 11 Aug 2004

Students at Sweden's Ume? University Institute of Design presented their work in the annual Degree Show in June, which included work from the Masters programmes in Transportation Design, Advanced Product Design, and Interaction Design along with the final thesis projects from the Bachelor level graduates. Go to Photo Gallery250 photos The degree students from the three year bachelor programme showed their 10 week final degree projects in Industrial Design, and the two year Masters Programmes presented their 20 week final degree works.

Peugeot 207CC

Thu, 07 Dec 2006

Following the 207 Epure concept shown at the Paris Motor Show, Peugeot has revealed the production version, the 207CC - though without the concept's fuel-cell powertrain. Succeeding the popular 206CC launched in 2001, the 207CC obviously doesn't differ much from the show car, which was the first model touched by Co-Director Peugeot Design Jerome Gallix. Replacing the fuel cell is a range of IC engines; two gas and one diesel.

New 2 Way Remote Start Stop Motorcycle Alarm With Waterproof Main Unit on 2040-parts.com

Other for Sale

Holden Sportwagon Concept (2007): first official pictures

College Exhibition: Umea Institute of Design Degree Show 2004

Peugeot 207CC