Find NEW! DIY Owatrol Polytrol Colour Restorer 500ml Plastic Paint GRP Metal ORIGINAL in rishon lezion, israel, Israel, for US $33.50

Condition:New

Owatrol Polytrol Colour Restorer

500ml

PROPERTIES

Revives the colour and appearance of tarnished and dulled plastics and fibreglass (GRP) (car bumpers, boat hulls, garden furniture, shutters).
Restores marble, tiles, tombstones, slate, terracotta tiles where the colour and look has faded.
Rejuvinates and restores flat and chalky paint and varnishes dulled by weathering.
Restore the shine and protects chrome or polished metals: aluminum, chrome, brass, bronze.

APPLICATION

Before implementing POLYTROL, always make sure the surfaces are clean and free of grease, silicone, and always dry. If cleaning is necessary, use a solvent on metal or a mixture of water and detergent, preferably on plastic NET-TROL. Rinse well and allow to dry at least 12 hours. Hide areas that are not treated.
Carefully apply a layer of saturated POLYTROL. Beware of runs (for sanding metal surfaces thoroughly with steel wool very fine, well soaked POLYTROL).
Leave on for 10-20 minutes then remove the excess product by wiping with a clean lint or paper towel.
Allow at least 24 hours before use.

Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals and other surfaces. It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain and pollution and it also gives corrosion protection. When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion. Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.

Polytrol revives the colour and appearance of plastic, fibreglass, metal, paint, tiles etc.
Restores the colour and appearance of dull and faded surfaces caused by exposure to sunlight, rain and pollution
Deep penetrating oil that restores the original look and finish to gelcoat, plastic, metal and other surfaces
Protects against corrosion and blemishes
On bare metals Polytrol restores the shine and protects against corrosion

Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracota, marble, slate, etc.

Useful Information
Coverage: 18m² per litre
Application Tools: Soft brush or rag, fine wire wool for metal
Suitable for: Exterior & Interior use
Clean Up: White-spirit
Drying time: 10-20mins (leave 24 hours before use)
Suitable Surfaces: plastics, gelcoats, GRP (fibreglass), tiles, painted or varnished surfaces, stone, tiles, bricks, metals and more

DO NOT use Polytrol on white surfaces.

Payment- At this time I accept payment with PayPal

Shipping FREE to U.S.A , Australi, Canada and western European countries.

Australia,canada, Japan and other countries- please check your shipping cost.

I will ship worldwide, only registered mail.

Handling time: up to 3 business days

Shipping time: 10-20 business days (depends to what country it is shipped).

customs fees, TAX or VAT or any delay with the country regulation will be the buyer responsibility

Contact: Please do not hesitate to contact me, feel free to email me with any question at any time. I will get back to you within 12-24 hours

I'm a new seller on eBay , I provide high level of customer service, 100% satisfaction guarantee.

Nissan drops GT-R engine in the Juke-R: Video

Wed, 26 Oct 2011

Nissan, in its quest to garner as many Facebook “likes” as possible, released the fourth video in its Juke-R series. This clip shows Nissan engineers planning how to shoehorn the massive 3.8-liter, twin-turbo V6 from the GT-R in the Juke's engine bay, made for a 1.6-liter. First they had to support the frame by welding a jig in place.

Nissan wins New York taxi bid

Tue, 03 May 2011

Nissan won the fight for an exclusive 10-year contract to design and supply the next generation of taxis for New York City, starting in 2013. "The new taxis will be custom-designed to meet the specific demands of carrying 600,000 passengers a day in New York City traffic," Mayor Michael Bloomberg said Tuesday. "The vehicle meets the top priorities identified by the public in our online survey." Nissan was battling Ford Motor Co.

Honda plans gasoline engine for the CR-Z

Tue, 07 Dec 2010

Honda is set to provide the CR-Z with an all-new four-cylinder gasoline-engine option as part of plans to broaden the compact coupe's appeal in key world markets, including North America. Currently available with just one engine option—a gasoline-electric hybrid system that mates a 1.5-liter four-cylinder engine with a brushless electric motor—the CR-Z is also earmarked to receive a turbocharged 1.6-liter four-cylinder engine currently undergoing development in Japan. The new unit, which is also planned for the Jazz, the Civic and the Accord, forms an integral part of an engine downsizing program instigated at Honda.

New! Diy Owatrol Polytrol Colour Restorer 500ml Plastic Paint Grp Metal Original on 2040-parts.com

PROPERTIES

APPLICATION

Other for Sale

Nissan drops GT-R engine in the Juke-R: Video

Nissan wins New York taxi bid

Honda plans gasoline engine for the CR-Z