Find or Sell any Parts for Your Vehicle in USA

Rebuild Sea-doo 787 Rfi Engine, 781c.c. Fuel Injected Rotax Motor on 2040-parts.com

US $875.00
Location:

Carol Stream, Illinois, United States

Carol Stream, Illinois, United States
Condition:Remanufactured

 

 This is a completely rebuilt 787 RFI Rotax engine from a 2001 fuel injected Sea-doo GTX. It will work in any Sea-doo watercraft that uses this engine type. (This engine will not work in a unit that has carburetors) The engine has been rebuilt with all NEW parts. Starting with the cylinders, they have been bored oversize with new pistons and rings installed in them. The crankshaft was replaced with a rebuilt assembly using all new bearings, rods, and seals. The balance shaft had new seals and bearings installed on it, then the engine was assembled with all new seals, bearings, and gaskets. It also has the rotary valve and cover installed on it so you won't have to worry about proper valve timing. The engine was painted the factory silver color upon completion. The newer versions of this motor were painted black, and some black and grey. Either way they were painted they are all the same engine. The engine comes with the necessary gaskets to install it into your ski, as well as a new set of spark plugs. It will be shipped thru UPS and insured for the full bid amount.

 This auction works on an exchange basis. I do require that you send your old engine back to me as a core. With that said, I will be adding a core deposit to the final auction price. It will be $550.00. This money will be refunded to you after I receive and inspect your old engine. Any damage to the engine out of the norm will have the cost to repair/replace the damaged parts deducted from the deposit. I know the crank will be bad, and the pistons probably junk, this is normal. Holes or cracks in the cases/cylinders/head, cylinders bored to 1m.m. oversize or more, broken bolts, missing parts, things like this are not normal! If you have any questions on this feel free to e-mail me. I will not accept an SBT rebuilt engine as a core! And you must return the same engine type that you receive. I also ask that you return the core in a timely manor. You are welcome to send me your old engine first to avoid the deposit if you wish. Thanks.... 

 

Maserati GranCabrio at Frankfurt

Mon, 24 Aug 2009

Maserati will be launching the Maserati GranCabrio at Frankfurt It’s taken Maserati a year or three to cobble together the Convertible GranTurismo, but they’ve finally got there and the new car is Christened – The Maserati GranCabrio – and will launch at the Frankfurt Motor Show next month. Unlike its cousin the Ferrari California, the GranCabrio gets a folding rag-top instead of a tin-top, which should help keep the inevitable weight gains for a cabrio in check. But it’s still not going to be light at pushing on two tonnes.

HSV GTS/Vauxhall VXR8 (2013) first pictures of new Aussie M5

Tue, 14 May 2013

This is the new HSV GTS: all 577bhp of it. The V8-powered supersaloon has had a supercharger bolted onto its 430bhp engine, taking power from BMW M3 levels to the same poke as a Mercedes E63 AMG S. Plus, there's a new exterior and cabin design.

Exclusive: Derek Jenkins to become Design Director at Mazda

Fri, 27 Mar 2009

Derek Jenkins, former chief designer at the Volkswagen Group design studio in Santa Monica, will become the new Director of Design at Mazda's R&D Design Center in Irvine, CA. Jenkins, who resigned from Volkswagen on March 17th, will be filling the position previously held by Franz von Holzhausen, who left Mazda in August last year to become Design Director at Tesla Motors. "I'm excited to take on something new," Jenkins told CDN.