Find or Sell any Parts for Your Vehicle in USA

"race Day" Tribal Checkered Racing Flag * Boat Half Wrap Graphic - Custom Decal on 2040-parts.com

US $429.00
Location:

Naples, Florida, United States

Naples, Florida, United States
Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

BRAND NEW BOAT WRAP DESIGN

"Race Day" Tribal Checkered Racing Flag * Boat Half Wrap Graphic - Custom Decal

Sold in directional pairs, one left and one right side.
This graphic is 40" high x 129" long
Example is shown on a 20.5 foot boat.

This graphic can work with many different sized boats.
If you send us a side image of your boat with dimensions as shown below,
we will create a mockup for you, to scale, so you can see what it will look like on your boat.

If needed, we will adjust the size to fit your boat. Larger boats may cost a little more.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.

SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.

Your graphics color may vary slightly from what you see depending
on you monitor Setting.


(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat Wrap by Wraponboats.com


Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:
email artwork here

Skiff Example

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

Mockup for proofing
7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME CONTOUR CUT TO THE SHAPE SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

We have many variations of our graphics and also provide custom colors upon request.
 If you have any questions, Please don't hesitate to call.



Decals for Sale

Official: 2014 Corvette Stingray to pace Indy 500

Thu, 02 May 2013

On Thursday, the pace car for the Indianapolis 500 was announced, and if you are one to get excited about pace cars, it's time to get excited. This year, "The Greatest Spectacle in Racing" will be paced by the 2014 Corvette Stingray. That's right, the seventh-generation Corvette Stingray will be leading the field to green.

2014 Chevrolet Silverado spied in Colorado

Mon, 01 Oct 2012

The 2014 Chevrolet Silverado is a redesign of a key General Motors moneymaker. Autoweek reader Robert Trzaska submitted this photo taken en route to Vail, Colo. The truck does have some dirt on it, but not enough for us.

Gordon Murray T25

Mon, 28 Jun 2010

Gordon Murray Design has unveiled the T25 prototype, a car that the company's founder, Gordon Murray, has long talked about as the vehicle that will revolutionize the automotive industry. At just 2400mm long, 1300mm wide and 1600mm high, the T25 occupies a greatly reduced footprint in comparison to a Smart ForTwo or Toyota iQ. The T25 seats three, with a central driver flanked by two rearward passengers, in a formation reminiscent of Murray's most famous work to date – the McLaren F1.