(2) Alpine Type-s Sws-10d2 10" 3000w Car Subwoofers Subs+mono Amplifier+amp Kit on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

• (2) Alpine Type-S SWS-10D2 10" Dual 2-Ohm Car Audio Subwoofers 3000 Watt
• (1) Alpine MRX-M55 X Series 550 Watt Digital Mono Car Audio Amplifier
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit

Features of SWS-10D2:

• Alpine Type-S SWS-10D2 10" Subwoofer
• Peak Power Output: 1,500 watts
• RMS Power Output: 500 Watts
• Dual 2-Ohm Voice Coils
• Built Like Type-R
• Massive Voice Coils
• High Strength Steel Frame
• Concealed Mount Gasket System
• High-Grade Strontium Ferrite Magnets
• More Bass In Less Space
• Alpine’s Patented Airflow Management System Keep it Cool
• 8 AWG Push Terminals
• Kevlar Reinforced Pulp Cone
• HAMRS Santoprene Rubber Surround
• Frequency Response: 28-200 Hz
• Sensitivity: 86.5 dB
• Top-Mount Depth: 5-9/16"
• Enclosure Recommendations
• Minimum Sealed Box Volume: .50 Cubic Feet
  
• Maximum Sealed Box Volume: .85 Cubic Feet
• Minimum Ported Box Volume: .75 Cubic Feet
• Maximum Ported Box Volume: 1.3 Cubic Feet

Features of MRX-M55:

• Alpine MRX-M55 X Series mono subwoofer car amplifier
• Max Power Output: 1100W
• RMS Power Output: Per channel @ 4 Ohms: 350 Watts RMS
• RMS Power Output: Per channel @ 2 Ohms: 550 Watts RMS
• Minimum Impedance: 2 Ohm
• Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
• Subsonic Filter: 5 - 30 Hz, -24dB/oct.
• EQ (Equalizer): 0 to +12dB, fc=50Hz
• Foot Print (WxHxD) mm: 250 x 58 x 230 mm
• Foot Print (WxHxD) in: 9-7/8'' x 2-1/4'' x 9''
• Heat Sink (WxHxD) mm: 190 x 58 x 230 mm
• Heat Sink (WxHxD) in: 7-1/2'' x 2-1/4'' x 9''
• Power Requirements: 14.4 V.DC (11-16V allowable)
• Input Sensitivity (RCA Input): 0.1 - 4.0 V
• Input Sensitivity (Speaker Level Input): 0.5 - 10 V
• Input Impedance: >10k ohms
• Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 5 -400 Hz
• Frequency Response (+0, -1dB: 1W into 4 Ohms) for Subwoofer: 10 -300 Hz
• THD+N (10W into 4 Ohms) for Subwoofer: <0.004 %
• THD+N (300W into 4 Ohms) for Subwoofer: <0.04 %
• Damping Factor for Subwoofer: >1000
• Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 114 dB
• Preamp Output: 4.0V Max.
• Remote Level: -20 to 0 dB
• Terminal Layout: Two-Sided
• Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
• Amplifier Type: Class-D (Digital)
• Channel Design: 1 Channel (Mono)
• Power Supply Design: DC-DC PWM Power Supply
• Power Supply: MOSFET
• Final Outputs: Direct FET
• Crossover: Variable Lowpass Filter
• Gain Control: Continuously Adjustable Gain Control
• Subsonic Filter: Variable Subsonic Filter
• Bass EQ: Bass EQ Function
• Bass Control: Remote Bass Control (RUX-KNOB) Ready
• Low-impedance Possibility:
• Current Protection: Over-Current, Over-Voltage and Thermal Protection
• Board Circuitry: S.T.A.R. Circuit
• Board Design: 6-layer Glass Epoxy PC Board
• RCA Output: Non-Fading Pre-Amp Output
• Speaker-Level Inputs: 4-channel Speaker Level Inputs
• Power Indicator: Top Mounted Blue LED Power Indicator
• Thermal Control: Multi-stage Power Limits
• CEA-2006 Power Rating: 350W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

Description of RWK41: 

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.