(2) Kicker 43c124 Comp 12" 600 Watt Car Subwoofers+vented Sub Box Enclosure on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

• (2) Kicker 12" Subwoofers
• (1) Rockville Dual 12" Vented 2.0 Cu Ft/Side Sub Enclosure
  
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
•  20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals
  

Authorized Kicker Dealer!

Description for Kicker Subs:

The 2016 Comp 12-Inch Subwoofer is a 4-Ohm speaker, made to give you the strong lows you seek every day. This Comp sub features a thick woofer cone, 360-degree back bracing, a strong motor structure and perimeter venting to ensure you get the strong, reliable bass you need. The 2016 Comp Subwoofers give you deep bass and a great value.The Comp 12-Inch Subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power.

Features:

• KICKER 43C124 Comp 12" 300 Watt SVC 4-Ohm Car Audio Subwoofer
• Size: 12 inches (30.0 cm)
  
• Impedance: 4 ohm SVC
  
• Max Rec Amplifier Power:*
  ....300 Watts Peak
  ....150 Watts RMS
  
• Sensitivity: 88.3 dB 1w/1m
  
• Frequency Response: 27-500 Hz
  
• Mounting Depth: 5-7/8 inches (14.8 cm)
  
• Mounting Cutout: 11 inches (27.9 cm)
  
• Min Sealed Box Vol: 1.25 cu. ft (35.4 L)
  
• Max Sealed Box Vol: 3.5 cu. ft (99.1 L)
  
• Min Vented Box Vol: 1.75 cu. ft (49.6 L)
  
• Max Vented Box Vol: 2.25 cu. ft (63.7 L)
  

*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.

Description for Rockville Enclosure:  

The RDV12M is a dual 12" vented dual chamber subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made for subs that require larger air space. Each chamber nets 2.0 cubic feet of air space. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RDV12M Dual 12" 3.98 cu.ft. MDF Dual Chamber Subwoofer Enclosure Box
• Designed For 12" Subwoofers
• Machine precision cut mounting holes
• ¾” USA Heavy Duty MDF Construction
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work perfectly with high powered subs
• Designed to give the best sound quality

Enclosure Measurements:

• Type of Enclosure: Dual Vented Chamber
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 34" L x 18" W x 15 H"
• Top and Bottom Depth: 15"
• Mounting Depth: up to 11" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 5.31 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 3.98 Cubic Feet

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.