(2) Rockford Fosgate Pm282w-b 8" 400w Marine Wakeboards+(4) Speakers+amplifier on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 2 YEAR AUDIOSAVINGS

• (1) Pair of Rockford Fosgate PM282W-B 8" Wakeboard Tower Speakers Totaling 400W
• (2) Pair of MB QUART NKF116 6.5" 2-Way Nautic Boat Audio Speakers Totaling 200W
• (1) MB QUART NA1-320.4 320 Watt RMS 4-Channel Marine Boat ATV Compact Amplifier
• (1) MB QUART N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller

Authorized Rockford Fosgate Dealer!

Description of PM282W-B:

The PM282W-B is a Punch 8" 2-way wakeboard tower speaker enclosure featuring marine grade weather proofing technologies. Supplied in all black with a stainless steel sport grille.

Rockford Fosgate's PM marine grade standard takes into account the devastating effects of the outdoor environment and takes extreme measures to ensure optimum performance. 

The PM282W-B is a black 8" true marine grade speaker loaded into a sealed tight enclosure. The speaker features a 8" woofer and 1" bridge mounted tweeter in a high density poly-ethylene enclosure and protected by a stainless steel grille. Both speaker and enclosure are treated with UV inhibitors and conform to UV and Salt-Fog industry standards.

Features :

• Rockford Fosgate PM282W-B 8" 400 Watt Marine Wakeboard Tower Speakers in Black (Pair)
• Punch Marine Wakeboard Tower Speakers
• Power Handling :
• Peak Power Handling : 400 Watts (200 Watts per Speaker)
• RMS Power Handling : 200 Watts (100 Watts per Speaker)
• True Marine Grade compliance
• High density poly‐ethylene enclosure with UV inhibitors
• Quick release design for security and cleaning
• Includes safety lanyard
• Malibu® direct mount compatible
• Comes loaded with PM282B marine speakers
• Optional C-clamp available fits bar sizes 1-1/2" to 2-3/4"
• Available in black or white
• CEA-2031 Compliant
• Woofer Size : 8"
• Woofer Series : PM282B
• Nominal Impedance (ea) : 4-Ohm
• System Configuration : Sealed
• Enclosure Material : High density poly-ethylene
• Speaker Connector : 16 AWG 2-pin quick disconnect 
• Replacement : 1560-58345-01
• Frequency Response : 40Hz - 20kHz
• Dimensions (H x W x D) : 10.9 x 9.1 x 14.2"
• Color : Black

Description of NKF116:

An award winning, marine certified premium 6.5" coaxial speaker for boat, RV and off-road vehicle audio installations. The speakers feature water resistant midrange cones, titanium tweeters and rust resistant connectors.  

Features:

• Pair MB QUART NKF116 6.5" 100 Watt 2-Way Nautic Marine Boat Audio Speakers White
• Marine Certified - Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
  
• IPX67 - Tested to the highest Marine and Motorsports standards for resisting the elements
  
• Titanium Dome Tweeter - Very smooth musical response, high output with minimal required amplifier power
  
• 6.5" Composite Poly Midrange - UVA Protected, water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
  
• High Temperature Voice Coil and Former - Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
  
• High Energy Y30 Motor assembly - High energy strontium ferrite magnet for higher output with minimal amplifier power
  
• Marine Certified Crossover - Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection

Specifications:

• Certifications: IPX67, Conformal Coated, UVA Certified, CEA426B
  
• RMS Power Handling (CEA426B): 50 watts per speaker
  
• Peak Power Handling (CEA426B): 100 watts per speaker
  
• Impedance: 4 ohm
  
• Frequency Response +/- 10dB: 65-25kHz
  
• Sensitivity (1 watt/1 meter): 86dB
  
• Mounting Diameter: 5.59" (141.9mm)
  
• Mounting Depth: 2.5"

Description of NA1-320.4: 

The NA series of powersports amplifiers are designed for off-road vehicles with proprietary full range class D technology which allows for great sound quality and unusually loud volume to fit into very limited space. This compact four channel power sports amplifier delivers great sound to four speakers with just the right features to dramatically improve the sound on any road.

Features:

• MB QUART NA1-320.4 320 Watt RMS 4-Channel Marine Boat ATV Compact Amplifier
  
• Circuit Topology: Full Range Class D
• Voltage Gain:
  .....0.2V~4V Low Level
  .....0.8V~15V High Level
• Signal to Noise: >90dB
• Frequency Response: 20Hz-20kHz

Specifications:

• Power @ 4-Ohms: 4 x 80 watts
  
• Total Channels: 4
  
• Audio Inputs: RCA High Level
  
• Wire Gauge 12v/GND: Molex Plug Connector
  
• Wire Gauge Speakers: Molex Plug Connector
  
• Fusing: 20 Amps
  
• Weight: 2.2 lbs (0.9 kilos)
  
• Dimensions: 5.5" x 3.7" x 1.7" (14 x 9.4 x 4.4cm)
  

Description of N1-WBT:

A high-end sound, marine certified waterproof wired bluetooth preamp controller for boats, off-road vehicles or project vehicles audio installation needs. With simple audio outputs to connect to an amplifier the N1-WBT allows simple installation to play music via any Bluetooth enabled device.

Features:

• MB QUART N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller
• Source Type: Waterproof wired bluetooth preamp controller
  
• Input Types: Bluetooth
  
• Control Buttons: Large, Waterproof - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
  
• Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process

Specifications:

• Bluetooth Range: 32' (10 Meter)
  
• Pre-amp Outputs: 1
  
• Pre-amp Voltage: 2v
  
• Controller Dimensions: controller 2" (4.8cm) round
  
• Dimensions Mounting Hole: 0.8" (2.2cm)
  
• Dimensions Mounting Depth: 0.8" (2.2cm)
  
• Weight: 5oz (0.01K)

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 2 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.