(4) Rockville 6.5" Wakeboard Speakers+(4) Kicker 6.5"+8 Ch. Amplifier+amp Kit on 2040-parts.com

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

• (2) Pairs of Rockville RWB65W 6.5" White Wakeboard Tower Speakers Totaling 1000W
  
• (2) Pairs of Kicker 41KM604W 6.5" Marine Speakers Totaling 600W Peak/200W RMS
• (1) Rockville RXM8BTB 8 Channel 1500 Watt Marine Bluetooth Amplifier
• (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Wire Kit
• (4) Rockville MRCA20 20 Foot Twisted Pair Marine RCA Cables
  
• (2) Rockville R14G500MSW 50 Feet Marine Waterproof 14 AWG Speaker Wires White
  

Advantages of the RWB65W:

• No exaggerated power ratings: These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak. (150 watts RMS is equal to about 400 watts rated by other brands)
• New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
• Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
• These can withstand all elements on the water for a lifetime of worry free use
• The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.

Features:

• Rockville RWB65W Pair of 6.5" WakeBoard Tower Speakers Totaling 500 Watts
• 6.5" Two-Way High Fidelity Speaker System
• Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
• 1" Polymide Dome Neodymium Midrange Tweeter
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Water / Rust Resistant
• Terminals Are Sealed with Rubber Gaskets
• Specially Tuned for PA Voice Over
• Polypropylene Mica Injected Cone with Santoprene Surround
• High BL Magnet Motor Structure
• Y30 High Density Magnets
• Oversized 1.25” Kapton Voice Coil
• Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage.
• Color: White

Details:

• Peak Power Handling: 250 Watts
• RMS Power Handling: 150 Watts
• Frequency Response: 70–20,000 Hz
• Sound Pressure Level: 96dB @ 1w/1m
• Impedance: 4 Ohms
• Mounting Depth: 9"

Includes:

• (2) Wakeboard Speakers
• Mounting Brackets
• Integrated Grill
• Installation Hardware

Audiosavings can only ship Kicker products to the United States.  Sorry, but we cannot ship Kicker to Canada or United Kingdom.

Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn't meet your standards; send it back to us within 90 Days and we ll give you a 100% FULL REFUND (or store credit). We ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.

Kicker 41KM604W designed for the simplest of speaker installations, it is a breeze to get live-quality, full-range audio designed specifically for a marine environment.

KICKER Marine Coaxials meet or exceed industry standards for environmental humidity and corrosion* and for material degradation due to UV exposure. ** UV treatments on the coaxials  injection-molded cones, Santoprene® surrounds, baskets and grilles help all models to maintain in marine environments, These speakers can endure most any weather conditions with splash- and spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. The coaxials come packaged with ample wiring for running the length of a large vessel to the power amplifier.

The KM604 is the only speaker pair that is completely white, available in 4-Ohm and with ½-inch tweeters.

Features:

• Pair of Kicker 41KM604W 6.5" 4-Ohm 2-Way Coaxial Marine Speakers
• Power Handling Per Speaker: 150 Watts Peak/50 Watts RMS
• Power Handling Per Pair: 300 Watts Peak/100 Watts RMS
  
• 2-Way Design
• Santoprene® surrounds
• Woofer Size: 6.5"
• Woofer Composition Polypropylene
• Tweeter Size: 1/2"
• Tweeter Dome Material: PEI (Polyetherimide)
• Impedance: 4-Ohms
• Sensitivity: 90dB
• Frequency Response: 35-21,000 Hz
• Cutout Dimensions: 5.18"
• Top-Mount Depth: 2.5"
• Grilles: White Only

Rockville RXM8BT Marine 8 Channel Digital Class D Power Amplifier with Bluetooth Wireless Integration.

The Rockville Proton Series Marine amplifiers are engineered with advanced technologies. These amps are a full solution to your marine audio needs. Gone are the old days where people bring CD's on their boat or listen to FM radio that cuts in and out. Gone are the days where you need a receiver and multiple amplifiers to power your speakers. Gone are the days where you have wires running throughout your boat. Welcome to the marine system of the future! The Rockville RXM8BT will change your life! This is an 8 channel amplifier with Bluetooth built in! The Bluetooth will allow you to stream music wirelessly from a Bluetooth enabled MP3 player or smartphone. Of course the RXM8BT features "zero noise" RCA differential preamp inputs and preamp outputs for system expansion. This means you can connect any audio device through the RCA input. But it's the high quality Bluetooth that will blow you away. It offers advanced streaming from almost any music device. Now you can easily play your iTunes, Pandora, Rhapsody and Spotify directly from your smart phone directly to all 8 channels of your amplifier. Even more importantly though, is the capability of the 8 channel amplifier. We feel this is the best marine amplifier on the market even if it did not have the Bluetooth capability which it has. It offers more system flexibility and more power than anything even remotely close to this price. I almost forgot to mention how good the sound quality is. 

The Rockville Proton Series Marine amplifiers utilize Texas Instruments patented switching technology to deliver class-leading sonic performance and extremely high power from what seems like an impossibly miniature package. The Proton Series' dimensions are made possible by its outstanding efficient class D design which is over 90%efficient. The result is more power in your boat with less current drain. Proton Series amplifiers are 2 ohm stable in stereo and 4 ohm in mono.There are so many options of configurations. Any 2 channels can be bridged to 1 channel. So for example, you can bridge 4 channels to 2 channels and still have an additional 4 channels remaining. You can simply plug 1 speaker to each channel. You can use 2 or 4 of the channels for subwoofers and the rest for your full range speakers. The configuration options are amazing with this amplifier. Whether you have 4 speakers, or 16 speakers, and whether you do or do not have subwoofers, this amplifier will power your system. With a smart auto thermal reset circuit, Proton Series amplifiers are almost impossible to shut down. When they get too warm, the thermal circuit reduces power by up to a third until they cool down enough to power up again at full power. And mixed impedances on different channels are no problem with the advanced rail voltage circuitry design.

This amplifier is so awesome I almost forgot to write about the most important thing. How much power the thing has. The short answer is a boatload!

But in all seriousness, this amplifier is extremely powerful. The true RMS ratings are 65 watts x 8 at 4 ohms or 95 watts x 8 at 2 ohms. This is the CEA compliant ratings. CEA compliant means the ratings are rated with the exact same rating standards as the top brands in the industry such as Kenwood, Alpine, etc. In total this has 750 watts RMS and 1,500 watts peak output. There are not many marine amplifiers on the market with this much power. Other brands out there will rate their amps at thousands of watts but in reality are only a hundred or 200 watts. But this Rockville amplifier is legitimate and will produce or exceed its rated power. To prove the power; you can check the fuse rating. This amplifier is equipped with an 80A fuse. To proe the power; you can look at the fuse rating. A general rule for 12 volt amplifiers is if you multiply the fuse rating by 10 that is close to the real power you will get. In this case that is 800 watts RMS (we rate it at 750w RMS since this is CEA compliant).

Features:

• Rockville RXM8BTB 8 Channel 1500 Watt Marine Amplifier W/Bluetooth Black
• Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!)
• 1500 Watts Peak System Power
• 750 Watts RMS System Power
• RMS Power Output at 4 Ohms: 65 Watts x 8 Channels CEA Rated
• RMS Power Output at 2 Ohms: 95 Watts x 8 Channels
• RMS Bridged Power Output at 4 Ohms: 190 Watts x 4 Channels
• Peak Bridged Power Output at 4 Ohms: 380 Watts x 4 Channels.
• Configurable to 8-6-4 channels or 6.1 or 4.2 System
• Bluetooth Wireless with Auto Pairing
• UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure
• Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
• LED Power and Protect Indicators
• TI Digital Class D Audio Topology
• High Speed MosFET Power Supply
• Studio Grade Bipolar Output Stage Transistors
• Micro Size Architecture with SMD Component Circuitry
• Compact Design and High Power
• Non-Corrosive High Gloss White Aluminum Casing
• Selectable Bass
• Non-Corrosive Brushed Aluminum Casing
• Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards
• Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz
• 4-Way System Protection Circuitry (DC, Short, Thermal, Overload)
• Heavy-Duty Aluminum Alloy Heat-sink
• Stainless Steel RCA Level Inputs
• Stainless Steel Bolt Down Molded Terminals
• 4CH / 8CH Input Selector Mode
• Independent Crossover Controls between CH1-4 and CH5-8
• Full Range / Low Pass / High Pass Configurable
• Variable High-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
• Variable Low-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
• Frequency Response: 10Hz - 40KHz
• S/N Ratio: >100dB
• Minimum THD: <0.05%
• Damping Factor: >200 at 100Hz
• Input Voltage: 150mV - 6V
• RCA Line Output
• 80A Fuse rating!
• Channel Seperation: >60dB
• Input Impedance: 22K
• Dimensions 6.7" W x 2" H x 11.5" L

Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!

Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.

Features:

• Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
• 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1PC 60A Mini-ANL Fuse
• 2PCS Ring Terminals
• 2PCS Spade Terminals
• 5PCS Speaker Cable Terminals
• 1PC Washer
• 10PCS White Cable Ties

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Features:

• Rockville MRCA20 RCA Interconnect Cable
• 20’ Ultra-Flexible PVC Shield
• Twisted Pair
• Premium Audiophile Marine RCA Interconnect Cable
• High Performance Water Proof RCA Plugs
• Tinned Copper Strands for Sonic Purity
• Outstanding Noise Rejection, Accuracy, and Frequency Response

Rockville Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Features:

• Rockville R14G500MSW 50 Ft Marine/Boat White Speaker Wire
• Gauge: 14 Gauge
• Wire Length: 50ft (Cut from a 500 foot spool)
• For Marine Audio Applications
• Waterproof insulation
• Also great for car audio applications
• Stranding: 72x0.15mm x 2C (72 Strands of 0.15mm Wire per Wire)
• Braided Super-Flex Design Ensures Optimum Surface Area and Flexibility
• Delivers Impressive Clarity, Bass Response, and Dynamic Range
• Eliminated Unwanted Noises and Maximizes Signal Transfer
• Color: White
• Marine Grade Wire
• Engineered to withstand daily harsh marine conditions
• protected against corrosion and its soft, flexible PVC jacket surrounds
• excellent signal transfer.
• Tinned wire has superior corrosion resistance.
• UL1426 Premium Oxygen Free Copper Boat Cable
• Resistant to extreme cold, salt water, battery acid, oil, gasoline and ultra-violet radiation.
• Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion.
• Drawn copper, unidirectional lay for ultimate in sound quality.
• Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards.
• Using a propriety blend of pure copper wiring and special winding technique, we were able to reduce the "impedance skin effect" reducing noise while maintaining sound purity with minimal to zero impedance gain
• Installation in the tightest of corners are easily conquered, thanks to our Super-Flex insulation. Rockville marine speakers cables are durable, very flexible and easy to use
• The Super-Flex jacket was designed to handle the most extreme conditions
• These wires meet the high-powered demands of amplifiers and speakers. Designed for purity and longevity
• White insulating jacket visually blends smoothly in to marine audio environment

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.