(8) Flow Matched Oem Bosch Ford Motorsport Fuel Injectors 4.6l V8 # 0280156048 on 2040-parts.com

Refurbished Injectors by 

Injector Repair LLC  

One Year Limited Warranty

(518) 956-0014

             This is a set of eight (8) professionally refurbished and fully tested 24 lb/hr OEM Genuine Bosch Ford Motorsport fuel injectors, Bosch # 0280156048, Ford # 1W7E-A5A, or for cross reference purposes, SMP # FJ459. 

          This is a Flow Matched Set.

          The eight test cylinders of the fuel injector bench testing unit in the picture above are the actual flow test results from this set of Bosch Ford Motorsport injectors - after servicing they flow matched just 2 % ( which is awesome ) !!!  A flow matching set of injectors should all be flowing within 5% of each other for proper engine performance, power, smooth idling and smooth throttle response during acceleration. 

          These injectors performed flawlessly during all the performance tests in the computerized fuel injector bench testing unit. 

          These injectors have all new upper and lower o-rings, and more importantly, all new internal microfilters have been installed. Why take a chance on used and untested fuel injectors that may have crud filled internal filters, old hardened o-rings ( vacuum leaks, fuel leaks ), or a bad coil ?? 

          Other than a few scratches in the plastic, these injectors look great.  

                    All of the injectors I sell are fully cleaned, back-flushed,  lubricated, and flow tested, and are 100 % ready to be put into service.   

          They are guaranteed to perform like new.      

              These Generation III Bosch injectors have the four hole discharge nozzle design which delivers superior fuel atomization for a more complete and even fuel combustion and more power. These are high performance 24 lb. / hr fuel injectors that were used in Ford Police Interceptor 4.6L V8 engines, and these are often used to upgrade 1999-2004 Jeep Wrangler Grand Cherokee 4.0 L engines, and are also used to upgrade the Ford Mustang 3.8 L V6 engines, and other Ford 4.6 L V8 engines for more power. They are plug and play and have the newer EV6 / USCAR connectors.

                                          - 24 lb / hr, 265 cc / min. at 43.5 psi ( 3 Bar )

                                          - four hole discharge for more power

                                          - EV6 / USCAR style connectors

                                          - High Impedance, 15 ohms (approximate )
                

                  Outside of ebay I run a Fuel Injection Refurbishing business called Injector Repair LLC. Either sending your own vehicles' injectors out to be refurbished, or buying a complete set of flow matched refurbished fuel injectors are great ways to save a ton of money vs. buying brand new injectors at $70 TO $150 FOR EACH NEW INJECTOR. Genuine OEM Fuel Injectors are designed to outlast your engine, and should last way more than 300,000 to 500,000 miles. They usually only fail to perform when they get clogged ( a bad side effect of ethanol, or a bad batch of contaminated gas ), or when the injectors internal coil winding fails ( happens, but rarely ). OEM injectors that are factory original are far superior in quality than the aftermarket injectors sold by the big name auto parts stores. They may look the same, but they are definitely not the same quality as OE brands like Bosch, Delphi, Denso, IPT, JECS, Keihin, Nikki, Rochester, Siemens Deka, and Weber.                

                  Each fuel injector is;

                                       - externally cleaned 

                                       - resistance checked 

                                       - parts ( including internal filter ) are removed

                                       - the injectors are ultrasonically cleaned while being computer driven

                                       - injectors are back-flushed

                                       - Then the injectors parts are replaced with new high quality o-rings, plastic caps ( when needed ) , plastic spacers, and the internal injector microfilter.

                                       - The set of injectors are then flow tested on a computerized fuel injector bench testing unit and evaluated for leak down, flow volume and spray pattern. In order to pass, the injectors have to not leak when closed under full pressure, and they have to have the proper spray pattern and the proper flow volume when tested under a number of different scenarios. They are subjected to multiple tests and are tested; At Static condition (wide Open), 3 millisecond pulse width, 6 millisecond pulse width, 12 millisecond pulse width, and are tested at various RPM.'s. These tests insure that the injectors are performing correctly under all conditions, and will detect a faulty injector coil that may have passed a resistance check.

                  This set performed excellent, and flow matched at 2 % !!!!

                  We have a One Year Limited Warranty, with a 60 day no questions asked warranty policy; if you are not happy for any reason during the first 60 days, just send them back for a refund - and no restocking fee. You pay for return shipping. After 60 days we will either repair or replace any defective injector. Go to the Injector Repair LLC company website for warranty policy details.

               Call us at (518) 956-0014 with any questions.