*drag Race Launch Kit* Lowering Straps & Brackets Honda Cbr 1000rr Cbr1000rr on 2040-parts.com
Elkton, Maryland, US
******BUY FACTORY DIRECT*****
MOTORCYCLE SUSPENSION LIMIT
FRONTEND LOWERING STRAPS
&
RADIAL BRAKE CALIPER MOUNTING BRACKET COMBO
(PIC IS OF BLACK BRACK SHOWN AS REFERENCE ONLY, BLACK BRACKETS ARE IN ANOTHER LISTING)
1-3 DAY USPS PRIORITY SHIPPING INCLUDED!!!
(APPLIES TO ALL 50 USA STATES)
USPS PRIORITY INTERNATIONAL SHIPPING AVAILABLE
NHRA IHRA MiROCK CMDRA WMDRA PMRA NHDRO AMRA ADRL AHDRA AMA PROSTAR DRAGBIKE APPROVED!!!!
THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. NOW YOU CAN CRUISE AROUND WITHOUT DISRUPTING HANDLING OR STEERING. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND....BAM!! YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT "SITUATION" THAT NEEDS SOME ATTENTION.
THESE STRAPS ELIMINATE WHEELIES FOR LOWER 60' AND QUICKER E.T'S.
THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE "HAMMER" EFFECT WHICH OCURES WHEN LAUNCHING HARD.
STRAP SPECS:
1" PRESS RELEASE CAM BUCKLE
PRE DRILLED BOLT PLATES AT THE ENDS
4.5' OVERALL LENGTH
4500 LB. TEST NYLON WEBBING
1800 LB. RATED CAM-BUCKLE
RADIAL BRAKE CALIPER MOUNTING BRACKETS SPECS:
This is a fast easy way to lower your bike on the street or at the track to provide for more level ride height. At the track these are used to adjust the front end height to control weight transfer during launching.
These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps.
CNC Machined from Lightweight Aircraft 6061 Billet Aluminum and provided with stainless steel corrosion free hardware.
DON'T SETTLE FOR SECOND BEST:
OUR STRAPS ARE 20% STRONGER THAN ANY OTHER AVAILABLE ON THE MARKET!
BUY THE BEST!!!
SIMPLE UNIVERSAL INSTALL
Begin by removing top and bottom brake caliper mounting bolts.
Re-insert the bolts through the Radial Mount Strap Brackets with the notched area facing toward the brake caliper.
Torque bolts to 29 FT/LBS and repeat on the opposite side.
Always route strap UNDER any cables and wires to prevent pinching or damage.
Do not allow strap to twist. Route strap upward over steering neck, and down the other side.
Attach the remaining end of strap and Tighten strap slightly to remove slack.
Torque bolts on both sides to 28 FT/LBS.
WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.
*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them. NO warranty expressed written or implied.
CLUB & GROUP DISCOUNTS ARE AVAILABLE JUST ASK.
THE MORE YOU BUY....THE MORE WE WILL DISCOUNT YOU!!!!
BUY FACTORY DIRECT AND CUT OUT THE MIDDLE MAN MARKUP.
VISIT MY EBAY STORE FOR ALL OUR STRAP LISTINGS!!!
IF YOU DON'T SEE YOUR BIKE LISTED, JUST EMAIL US WITH YOUR YEAR MAKE AND MODEL AND WE WILL HOOK YOU UP WITH THE BEST DEAL POSSIBLE.
BE SURE TO STOP BY OUR WEBSITE FOR MORE GREAT PRICES.
WWW.SPEED-NEEDS.COM
THANK YOU FOR LOOKING AND WE HOPE TO HAVE YOU AS ANOTHER SATISFIED CUSTOMER.
Posted with eBay Mobile
et.com/albums/k272/soreback/CCC99999x.jpg" width="732" height="159" style="width: 745px; height: 136px;">******BUY FACTORY DIRECT*****
MOTORCYCLE SUSPENSION LIMIT
FRONTEND LOWERING STRAPS
&
RADIAL BRAKE CALIPER MOUNTING BRACKET COMBO
(PIC IS OF BLACK BRACK SHOWN AS REFERENCE ONLY, BLACK BRACKETS ARE IN ANOTHER LISTING)
1-3 DAY USPS PRIORITY SHIPPING INCLUDED!!!
(APPLIES TO ALL 50 USA STATES)
USPS PRIORITY INTERNATIONAL SHIPPING AVAILABLE
NHRA IHRA MiROCK CMDRA WMDRA PMRA NHDRO AMRA ADRL AHDRA AMA PROSTAR DRAGBIKE APPROVED!!!!
THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. NOW YOU CAN CRUISE AROUND WITHOUT DISRUPTING HANDLING OR STEERING. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND....BAM!! YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT "SITUATION" THAT NEEDS SOME ATTENTION.
THESE STRAPS ELIMINATE WHEELIES FOR LOWER 60' AND QUICKER E.T'S.
THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE "HAMMER" EFFECT WHICH OCURES WHEN LAUNCHING HARD.
STRAP SPECS:
1" PRESS RELEASE CAM BUCKLE
PRE DRILLED BOLT PLATES AT THE ENDS
4.5' OVERALL LENGTH
4500 LB. TEST NYLON WEBBING
1800 LB. RATED CAM-BUCKLE
RADIAL BRAKE CALIPER MOUNTING BRACKETS SPECS:
This is a fast easy way to lower your bike on the street or at the track to provide for more level ride height. At the track these are used to adjust the front end height to control weight transfer during launching.
These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps.
CNC Machined from Lightweight Aircraft 6061 Billet Aluminum and provided with stainless steel corrosion free hardware.
DON'T SETTLE FOR SECOND BEST:
PROUDLY MADE IN THE U.S.A!!!!!!!
OUR STRAPS ARE 20% STRONGER THAN ANY OTHER AVAILABLE ON THE MARKET!
BUY THE BEST!!!
SIMPLE UNIVERSAL INSTALL
Begin by removing top and bottom brake caliper mounting bolts.
Re-insert the bolts through the Radial Mount Strap Brackets with the notched area facing toward the brake caliper.
Torque bolts to 29 FT/LBS and repeat on the opposite side.
Always route strap UNDER any cables and wires to prevent pinching or damage.
Do not allow strap to twist. Route strap upward over steering neck, and down the other side.
Attach the remaining end of strap and Tighten strap slightly to remove slack.
Torque bolts on both sides to 28 FT/LBS.
WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.
*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them. NO warranty expressed written or implied.
CLUB & GROUP DISCOUNTS ARE AVAILABLE JUST ASK.
THE MORE YOU BUY....THE MORE WE WILL DISCOUNT YOU!!!!
BUY FACTORY DIRECT AND CUT OUT THE MIDDLE MAN MARKUP.
VISIT MY EBAY STORE FOR ALL OUR STRAP LISTINGS!!!
IF YOU DON'T SEE YOUR BIKE LISTED, JUST EMAIL US WITH YOUR YEAR MAKE AND MODEL AND WE WILL HOOK YOU UP WITH THE BEST DEAL POSSIBLE.
BE SURE TO STOP BY OUR WEBSITE FOR MORE GREAT PRICES.
WWW.SPEED-NEEDS.COM
THANK YOU FOR LOOKING AND WE HOPE TO HAVE YOU AS ANOTHER SATISFIED CUSTOMER.
Brakes & Suspension for Sale
Chrome rear brake fluid reservoir cover yamaha v-star & road star(US $40.00)
Triumph 500 650 fork spring top collar / abutment early no groove pn# 97-1657 e (US $17.95)
99 00 01 02 03 04 05 hayabusa gsx1300r srad gsxr750 front rotor disc brake 3271(US $85.00)
Rear solid mx brake disc rotor for honda xr650r 00 01 02 03 04 05 06 07 08(US $39.80)
Rear solid mx brake disc rotor for husaberg fe e fs fc fx 400-650 99-03 04 05(US $39.80)
Front solid mx brake disc rotor for honda cr250 r e 95 96 97 98 99 00(US $39.80)
Ford's maximum C for Frankfurt Auto Show
Thu, 03 Sep 2009Ford will introduce the redesigned C-Max, which uses the automaker's first global C-segment platform, at the upcoming Frankfurt auto show. The C-Max will be launched worldwide in the second half of 2010, with other models to follow on the platform, including the next-generation Focus, also coming in 2010. The C-Max takes its "kinetic" design cues from the iosis MAX concept car unveiled at this year's Geneva auto show, incorporating features such as a coupelike sweeping roofline.
Interior Motives Conference 2012 Day 1
Sun, 22 Apr 2012The annual Interior Motives China conference - this year held in Beijing to coincide with the motor show - was opened by the official Yang Shi Min. He welcomed the many delegates by acknowledging that discussion and debate will be the key element in the future of automotive design. He stated his belief that "discussion gives the opportunity for wisdom to sparkle", and opened the proceedings by encouraging all to share their wisdom with each other.
Porsche 911 Turbo S (2013) at Frankfurt motor show
Fri, 03 May 2013Porsche has topped off the 991-generation 911 range with a new Turbo and Turbo S model. The forced-induction 911 is the fastest Turbo yet, mixing Ferrari 458 levels of power with new chassis technology from the hardcore 911 GT3. What are the new Porsche 911 Turbo’s performance stats?