( Set Of 8 ) Flow Matched Oem Jeep Dodge Siemens Deka Fuel Injectors # 53007809 on 2040-parts.com

Refurbished Injectors by Injector Repair LLC

One Year Limited Warranty

(518) 956-0014

                 This listing is for a complete set of eight professionally refurbished and fully tested OEM Genuine Siemens Deka Chrysler Dodge Jeep fuel injectors # 53007809. For cross reference purposes, SMP # FJ214. 

             This is for a set of eight flow matching injectors.

             The eight cylinders of the fuel injector bench testing unit in the picture above are the actual flow test results from this set of Chrysler injectors - after servicing they flow matched at just 3 % (excellent) !! A flow matching set of injectors should all be flowing within 5 % of each other for proper engine performance, power, smooth idling, and smooth throttle response during acceleration. 

                               Our refurbished injectors come with all new upper and lower o-rings, and new internal microfilters. Why take a chance on untested used fuel injectors that may have crud filled internal filters, old hardened o-rings, or a bad coil ?? 

            These injectors cleaned up nice and look great for their age! They do show signs of their previous service, and have some cosmetic stains and nicks on their metal and plastic surfaces.

            This is a nice set of injectors.

            All of the injectors I sell are fully cleaned, back-flushed, lubricated, and flow tested, and are 100 % ready to be put into service.

            They are guaranteed to perform like new.

  Free shipping to the USA !!

                Outside of ebay I run a Fuel Injection Refurbishing business called Injector Repair LLC. Sending your own vehicles' injectors out to be refurbished, or buying a set of flow matching refurbished fuel injectors are both great ways to save money while getting your engine to perform like new. You will save a ton of money vs. buying brand new injectors at $70 TO $150 FOR EACH NEW INJECTOR. OEM Fuel Injectors are designed to outlast your engine, and should last way more than 300,000 to 500,000 miles. They usually only fail to perform when they get clogged ( a bad side effect of ethanol, or a bad batch of contaminated gas ), or when the injectors internal coil winding fails ( happens, but rarely ). OEM injectors that are factory original are far superior in quality than the aftermarket injectors sold by the big name aftermarket suppliers.  Aftermarket injectors are not manufactured to the strict tolerances that OEM injectors are, and the aftermarket injectors are made to just last longer than their year warranty. They may look the same, but they are definitely not the same quality as OE brands like Bosch, Delphi, Denso, IPT, JECS, Keihin, Nikki, Rochester, Siemens Deka, and Weber.  

                 Each fuel injector is;

                                       - externally cleaned 

                                       - resistance checked 

                                       - parts ( including internal filter ) are removed

                                       - dirty and clogged injectors are ultrasonically cleaned while being computer driven

                                       - injectors are back-flushed

                                       - Then the injectors parts are replaced with new high quality o-rings, and the internal injector microfilter.

                                       - The set of injectors are then flow tested on a computerized fuel injector bench testing unit and evaluated for leak down, flow volume and spray pattern. In order to pass, the injectors have to not leak when closed under full pressure, and they have to have the proper spray pattern and the proper flow volume when tested under a number of different scenarios. They are subjected to multiple tests and are tested; At Static condition (wide Open), 3 millisecond pulse width, 6 millisecond pulse width, 12 millisecond pulse width, and are tested at various RPM.'s. These tests insure that the injectors are performing correctly under all conditions, and will detect a faulty injector coil that may have passed a resistance check.

                We have a One Year Limited Warranty, with a 60 day no questions asked warranty policy - if you are not happy for any reason during the first 60 days, just send them back for a refund - and no restocking fee. You pay for return shipping. After 60 days, we will either repair or replace any defective injector. Go to the Injector Repair LLC company website for warranty policy details.