Find or Sell any Parts for Your Vehicle in USA

02 03 04 05 06 07 08 Dodge Ram Challenger Style Functional Ram Air Hood"genuine" on 2040-parts.com

US $395.00
Location:

West Covina, California, US

West Covina, California, US
Returns Accepted:Returns Accepted Item must be returned within:14 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Return policy details: Restocking Fee:No Placement on Vehicle:Front Surface Finish:GEL COAT FINISH - UNPRIMED UNPAINTED Warranty:No Part Brand:AITRACING

  • 100%AUTHENTIC  PRODUCT 

    PRODUCT DESIGN:

  • CHALLENGER STYLE

  • FITS 2002-2008 DODGE RAM
    • Includes
    • X 1 FULL REPLACEMENT HOOD
    • 100% Genuine
    • Hand Crafted
    • Brand New
    • Pliable FRP(fiberglass reinforced plastic) Product
    • Gel-coat finished
    • Aluminium mesh grill insert included where applicable
    • Funtional Vent
    • Uses factory hinges and latch
    • RAM AIR Fiberglass Hood High Grade A+

      Fully Functional Vented Heat Extractor



    Material

    ( FRP ) FIBERGLASS REINFORCED PLASTIC

    AIT Plastic resins -AIT special plastic resin is a hybrid form of polyester resin which has been toughened with epoxy molecules within the main molecular structure. AIT resins offers better resistance to moisture absorption than regular polyester resins.

    Gelcoat - provides high impact strength, excellent gloss, it is water resistance and helps prevent blisters from forming after laying the fiberglass mat.

    Benefits of Fiberglass:

    • Does not expand or shrink with temperature change.
    • Does not absorb water.
    • High strength to weight ratio.
    • Non-flammable.
    • Chemical resistant (except for hydrofluoric, hot phosphoric acids, and strong alkaline substances.)
    • Electrical insulator

    Vinyl Ester Resin - This gives superior flexibility and strength than that of polyester resin.
    Multi-Layer Fiberglass - Our pieces have 4 oz. layers of hand-laminated fiberglass with a plastic gel coat finish.
    Strong Gel Coat Finish - This results in a SMOOTH finish and adds extra strength to the part! Please be careful because other manufactured finished body kit parts will have orange peel rumples.
    Fitment - Our pieces have a much BETTER QUALITY fit when compared to competitor products.

    SHIPPING PRICE: IS FOR lower 48 states.

    FOR Hawaii, Alaska,Puerto Rico,Canada and ALL International areas will require us to obtain individual quote from our freight carrier.

    * Please make sure you provide  your correct info for shipping CORRECT NAME,ADDRESS AND VALID TELEPHONE # , YOUR ORDER WILL NOT SHIP UNLESS YOU COMPLETE ALL CORRECT SHIPPING DETAILS

    *We are not responsible for any extra costs caused by incorrect shipping information.

    *If you have any question like changing your ship to addres, Please contact us within 24 hours after you paid 

    *We do not deliver to APO/FPO/PO BOX OR MILITARY BASES, please provide your physical Shipping address. We deliver to both home or business locations.

    *All listings advertised are for ship out only, if interested in doing a local pick up price varies . Please email us through eBay for WILL CALL PRICING



    Shipping Damages

    Please inspect the item upon delivery before signing the receipt.DO NOT SIGN UNTILL YOU INSPECT ITEM(S) Make Sure You ->Refuse delivery if the item is damaged and make sure you note refused do to damages upon freight & we will reship you a new Item(s)asap! as long as you follow proper instructions

    *Contact y2kzigzag within 24 hours to file a claim request.Please make sure to include your item #  Failure to comply with this policy may result in a denial for damage claim.

    *All returns must be approved before you ship any item back to us.Return item must be issued by y2kzigzag *If you ship an item back to us without contacting us prior to shipping, we will refused

    *Shipping, handling, and insurance charges are not refundable.

    *All Order Returned will be charged return shipping.

    *All returns are subject to a minimum of a 20% restocking fee.

    *All shipments are made with a signature required.

    *All our products requires professional installation and is highly recommended. Buyer assumes all risk on shipment and usage. All items are as is with no warranty

    *images are for references only. If you are looking for a exact specific vent or grill, please contact us before making your purchase. Aerodynamics and ground effects are shipped unfinished and requires prep-work & priming before painting

    INSTALL & FITMENT

    FRP Composite/Carbon FRP Composite Hoods:

    Before you start, please make sure you have the proper safety equipment to avoid potential harm to you and your vehicle.

    FRP Composite/Carbon FRP Composite hood installation can relatively be an easy process; anyone with a little mechanical knowledge should be able to install parts in a few hours. Tools are also very standard, and if you have taken your factory parts before, replacing it with an aftermarket piece should be no trouble at all.

    1. Remove factory hood from the bolts at the end of the hinges. (Do not remove the hinges)
    2. Install new aftermarket hood by reverse process.
    3. Tighten bolts to just enough torque to hold the hood in place, but lose enough to be adjusted by a tug.
    4. Remove hood latch and check alignment.
    5. If the hood is not aligned properly, adjust accordingly and tighten bolts at the hinges.
    6. Re-install hood latch and adjust for fitment. (If the hood is latched but not fully close, the latch might need to be adjusted shorter. If the hood does not latch down, the latch might need to be adjusted longer.
    7. Check for fit and you’re done.

    Note: Installation of hood at your own risk. We advise hood pin for ANY aftermarket hoods. Even though we sell hoods as off-road and show purpose only, we recommend hood pins if  it’s going to see any type of road use.


    Payment Method:

    PayPal

    *We accept PAYPAL as only payment method. All item(s) will be held 3 days for payment with an unconfirmed address.

    *Unpaid auction will be forfited and unpaid dispute will be filed to ebay.

    *All payments are expected within 7 days after the last winning auction is closed.

    * If other payment method, please contact us prior to placing a bid.

    *For all California state buyers must pay sales tax.

     

    CONTACT US

    email us through ebay

    If you have any questions or concers please send us a message and we will reply back as soon as possible within 24 hours.

    Please make sure to leave us possitive feedback.




    TERMS & CONDITIONS

    All products sold are aftermarket products and intended for off-road or show use only. Vendor is not liable for any damages or injury as a result of these products. Purchaser is responsible for complying with any/all local, state, and federal laws regarding the addition or modification of parts. We disclaim any liability from the removal of reinforcements, bumpers, turn signals, and other safety equipment on the vehicle. Professional installation of body kits and body related parts (i.e. bumpers, side skirts, hoods, fenders, etc.) is highly recommended. Hood pins are highly recommended for aftermarket hoods. Vendor is not responsible for any items damaged during installation.

 

Seat opens new Global Design Center

Fri, 23 Nov 2007

Seat has opened its new Global Design Center, located within the Technical Center close to its manufacturing operations in Martorell, near Barcelona. A week of opening celebrations culminated with an event on Nov 8 for designers from the fields of architecture, fashion, industry, advertising, communication, art and photography, as well as specialised design media. More than 130 attendees were able to stroll around the Seat Design Center facilities in an informal and relaxed atmosphere.

The Race of Champions Returns To Wembley

Thu, 26 Jun 2008

By Ben Whitworth Motor Industry 26 June 2008 13:46 Schumacher is back! The battle to decide the world’s fastest motorsport star returns again to Wembley Stadium on the 14th December – and the seven-time F1 champ has already signed up. Covered in almost 2000 tonnes of tarmac, the pitch will once be transformed into a bespoke circuit which will see the cream of the motorsport world go head-to-head on equal terms and in identical cars.

Alcraft Motor Company crowns competition winners

Wed, 05 Feb 2014

If you’re looking at that picture above and thinking, “that looks like a smart Range Rover Evoque,” don’t worry – you’re not seeing things. It is indeed a ‘re-imagined’, restyled version of Land Rover’s luxury compact SUV, by Alcraft Motor Company competition winner Jed Sheahan. On Bing: see pictures of Alcraft Motor Company cars Find out how much a used Range Rover costs on Auto Trader Alcraft is a new British brand performing bespoke re-engineering and design projects on famous vehicles from Blighty.