Find or Sell any Parts for Your Vehicle in USA

02 05 Acura 5 Lugs Rear Left & Right Disc Conversion Jdm K20a on 2040-parts.com

US $248.00
Location:

Irving, Texas, United States

Irving, Texas, United States
Used, normal wear and tear, not New, view pictures for more detail or contact us please.
Brand:Acura Placement on Vehicle:Left, Right, Rear Manufacturer Part Number:Acura 5 Lugs Disc Conversion JDM K20A Warranty:No Interchange Part Number:Acura RSX TSX EP3 Country/Region of Manufacture:Japan Other Part Number:Acura 5 Lugs Disc Conversion JDM K20A

 photo af54a645-59a6-4077-9a65-61592479a861.png

 photo bb568978-07f0-47be-a4f1-4e82144df6ab.jpg

For Shipping Quote To Lower 48 States And AK, HI, PR Or Out Of Country Please Contact Us Toll Free : 1-888-986-2880 / Above Mentioned Emails ***

Local Pick Up Are Welcome !!!

ALN JDM Auto Motors is one the largest JDM Low Mileage Engines & Transmissions Importer!!!
 
We have a large inventory of JDM SOHC, DOHC, VTEC, NON VTEC, i-VTEC, SUPERCHARGED, TURBO CHARGED, KLZE, ROTORY, ETC. in Stock at the competitive low prices! 

THIS AUCTION IS FOR A USED 02-05 ACURA 5 LUGS REAR DISC CONVERSION JDM K20A

PLEASE NOTE:
WE HAVE A LARGE QUANTITY OF LOW MILEAGE JDM ACURA/ HONDA,  NISSAN / INFINITI, TOYOTA / LEXUS, MAZDA, MITSUBISHI ENGINES AND TRANSMISSIONS IN STOCK AT VERY LOW COMPETITIVE PRICES AVAILABLE

THIS ACURA REAR DISC ASSEMBLY 
WE HAVE IN STOCK WAS REMOVED FROM A RUNNING ACURA VEHICLE IN JAPAN AND IMPORTED TO US DIRECTLY!!!

 SOLD AS IS AND THERE IS NO WARRANTY ON THIS ITEM
    &             
100% CUSTOMER SATISFACTION GUARANTEED !!!

" PLEASE DO YOUR RESEARCH PRIOR TO PURCHASING, WE WILL NOT BE RESPONSIBLE IF IT IS NOT COMPATIBLE OR DOES NOT FIT IN YOUR VEHICLE / CAR "

*** FREE SHIPPING APPLIES ONLY TO LOWER 48 STATES, EXCEPT AK, HI, PR, VI. *** 
*** SHIPPING TO AK, HI, PR & VI PLEASE CONTACT US OR EMAIL YOUR INFO FOR ACCURATE RATE / SHIPPING QUOTE ***

METHOD OF PAYMENTS
  
PAY PAL
***ALL  MAJOR CREDIT CARDS ACCEPTED***
AMEX
DISCOVER
DINNERS CLUB
MASTER CARD
VISA
WE ALSO WELCOME AND ACCEPT, 
BANK WIRE TRANSFER / TT    
CASHIER / CERTIFIED CHECK  
COD FOR LOCAL DELIVERIES
CASH ON PICK UP

THANK YOU!

WHAT YOU SEE IS WHAT YOU GET!!!

***ACTUAL PICTURE  SHOWN***  

WARRANTY INFO:
           
ALN JDM Auto Motors offers 30 days start up warranty on any non performance engines, transmissions and brand new Ignition Distributors.
   
 Any Performance engines such as Vtec/ i-Vtec, Turbocharged, Supercharged, Mazda Klze (Excluding Rotory & Diesel Engines)comes with 14 days start up warranty.

 
All Mazda Rotory such as 13B Turbo II,13B Twin Turbo, 20B 3 Rotors, 13B-RE are (SOLD AS IS). We make sure they are not Ceased up or Locked before selling it.
  
All Accessories and other body parts such as Steering Wheels, Clusters, Floor Mats, Seats, Rims, Ecu, Maf Air Flow Sensors, Nose cuts Etc. are also (SOLD AS IS)
 
Warranty does not cover  any External Parts or Accessories on the Engines and Transmissions such as Distributor, Distributors' cap / cover, Intake Manifold, Exhaust Manifold, Oil Pan, Solenoids, Wiring Harness, Plugs, Sensors, Belts, Etc. Which in most cases needs to be changed / swapped over from your stock Engine or Transmission any way.
 "Also in most cases you have to use these JDM engines as Long Block Only because they are out of Right Hand Drive Cars in Japan".
   
 
ALN JDM Auto Motors, Will not be responsible for any improper installation on our products, it must be installed by ASE 
Certified Mechanic.
 

Any costs associated with repairs or replacements, including labors, installations or any other related costs, shipping charges would not be covered under warranty. We ask our respected customers to contact us with any problems or concerns about our products within   
14 days from the date of purchase on the original invoice.

If the Product has been altered in any way, improperly installed, or not used for its' intended purpose,warranty will be voided.

In the unlikely situation of our products being defective / bad you need to contact us first with a letter / document from your Certified Mechanic as a proof that way we give you a RMA number(Return Merchandise Authorization) then you could ship it back to us,
other wise the shipment is going to be refused here at our establishment at customers' own expense. 

Exchange is only offered if our product is bad, again we would require a written document from your ASE Certified Mechanic proofing it. For any other reason if a customer refuse or return our products there will be a 25% restocking fees plus both ways shipping.

Shipping & Handling

ALN JDM Auto Motors offers its' Customers with the Lowest Shipping Charges possible both Domestic & International!!!
We use several different Freight Companies to get the best and lowest price on shipping.

Dear Customers,
In order to provide you with an accurate shipping rate please contact us with your complete address where it is shipping to by
calling at: 972-986-2886 / 469-500-0301
or
Email us at:
info jdmautomotors com
alnjdmautomotors gmail com
  
Domestic & Canadian shipments Estimated Time of Delivery is between 2-10 business days by Freights.

International shipments are by Ocean Freight to the nearest Ocean Port of Discharge and Estimated Time of Delivery is between
4-8 weeks.

Attention Customers:
We at ALN JDM Auto Motors do our best to ship your orders by packaging and putting it on the skids on big shipment as safe as possible free of any damage leaving our warehouse, but since we don't do the shipping and handling part ourselves there fore we ask our Respected Customers to please check everything when receiving it by freight company and make sure there is no sign of damage, if you see anything please make a note of it on the Bill Of Lading before signing to receive it from Freight Company's drivers.
That way it makes it easier to do a claim with Freight Company for any damages.
 
Thank you!
 
  We appreciate your business!!!

2012 Mercedes A-Class teased on video

Sat, 21 Jan 2012

2012 Mercedes A-Class teased on video The 2012 Mercedes A-Class is being teased on video ahead of a Geneva 2012 debut in conjunction with a ‘QR Code’ competition. With Detroit pretty much done and dusted, it’s time for car makers to begin teasing their offerings for Geneva 2012 (which we saw some of even before Detroit). Today it’s the turn of Mercedes with a video tease for the 2012 Mercedes A-Class, coupled with a competition too (although that seems to be just for Germany).

Saab 9-3X – UK Prices announced

Wed, 06 May 2009

Saab 9-3X - UK Price announced We still don’t know what’s going to happen to Saab. According to recent reports, Fiat will take over Saab, but today there has been a denial of this by Saab’s boss, saying there are 10 suitors for Saab, none of whom are Fiat. We’ll have to wait and see.

Bentley plots new models

Tue, 28 Nov 2006

By Georg Kacher Motor Industry 28 November 2006 09:00 Bentley's replacement for the Continental family is likely to be constructed of aluminium, to cut weight and transform the dynamics. Engineers are already pondering the new model range, although it's a few years away. The replacement must maintain Bentley's stellar growth rate.