Returns Accepted:Returns Accepted Item must be returned within:30 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Return policy details:GENERAL RETURN POLICY: Returns only accepted within 30 days of purchase. No exceptions. Part is guaranteed fully functional or your money back. This does not include improper installation or incorrect interchange. Refund will be granted upon receipt of the defective part. NON DEFECTIVE RETURN POLICY: NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE NOT ELIGIBLE FOR A REFUND ON FREIGHT. ENGINE RETURN POLICY: Engines are guaranteed for thirty (30) days after date of receipt, and only when used under normal driving conditions. Used engines are warranted as long blocked (against cracked blocks, heads, flat cranks, and all internally lubricated components). Any abuse or lack of maintainence or overheating will void the warranty. A heat tab will be placed on all engines. Removal of the heat indicator tab voids the warranty. TRANSMISSION RETURN POLICY: Transmissions are warrented to work properly and guaranteed for 30 days. All warranties are contingent on the parts being properly installed to the manufacturer's recommendations. Any improper installation will void the warranty. Warranty is voided if the cooling lines and radiator are not flushed prior to installation. Not installing new filter will void any warranty. We do not warranty external sensors, solenoids, linkages, or leaking seals. AIR CONDITIONING COMPRESSOR RETURN POLICY: OUR STANDARD PARTS WARRANTY IS THIRTY DAYS. FOR THIS WARRANTY TO BE VALID ON AIR CONDITIONING COMPRESSORS, THE RECEIVER-DRYER MUST BE REPLACED AT THE TIME THE COMPRESSOR IS INSTALLED. THE RECEIVER-DRYER IS ALSO A FILTER, AND PREVENTS ANY DEBRIS OR CONTAMINATION THAT MAY BE PRESENT IN THE SYSTEM FROM DAMAGING THE NEW COMPRESSOR. PROOF OF PURCHASE AND/OR INSTALLATION OF A NEW RECEIVER-DRYER IS REQUIRED FOR ANY AIR CONDITIONING COMPRESSOR WARRANTY CLAIMS. Restocking Fee:No Interchange Part Number:229.CH9109 Other Part Number:sn 6676a Placement on Vehicle:Right Surface Finish:Chrome Part Brand:Jeep

This auction is for the following item:

This is a used Right (Passenger) Front Inside Door Handle

From a 2009 Jeep Patriot

It is in excellent used condition

I saw no damage on this part

It will fit:

09-11 Patriot

It is the buyer's responsibility to determine

if this part will fit his/her vehicle

NON DEFECTIVE RETURN POLICY:

NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE
SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE
NOT ELIGIBLE FOR A REFUND ON FREIGHT OR SHIPPING.

Questions? Not what you're looking for?

Please contact us if you need something else.
_____________________________________________________

INTERNATIONAL CUSTOMERS: International shipping via

USPS is NOT available at this time.

_____________________________________________________

All sales with in Arizona will be charged sales tax.

We accept Visa / MasterCard.

We are a company that takes your business seriously.
We will answer your emails and calls as
soon as possible during our regular business hours.
We will leave good feedback for you upon
completion of successful Ebay transactions only.

We recycle wrecked Pickup Trucks, 4x4's, and SUV's.
From Engines and transmissions to wiring harnesses and door parts.
Steering and suspension parts to lighting assemblies and dash components.
Emission controls and body parts to bumpers and seats.
We stock parts that other yards throw away.

Our address is:

Ace Pickup Parts
9110 S. Eisenhower rd.
Tucson Az, 85706

Call us toll-free at:
(888).862.4ACE (4223)
or
(520).889.9000
Or fax us at:
(520).889.5000

And Remember Our
Hours of Operation:
8:00 AM till 5:00 PM
Monday through Friday
Closed Weekends

Toyota ME.WE Concept: It’s an egalitarian EV

Wed, 24 Apr 2013

Based on the electric running gear of the Toyota i-Road we saw at Geneva (but with a full set of wheels) Toyota and Massaud have created an urban vehicle that takes transport back to the basics; a 2CV for the 21st century, perhaps, or a grown up home-made kart seems to be where the ME.WE is at. The construction of the ME.WE comprises a tubular aluminium chassis and a pile of interchangeable polypropylene panels that can change the function of the ME.We from city car to convertible to pickup to 4×4 (thanks to electric motors on both axles) and is, by any definition, transport and not a car you’d have to make a statement. Inside is just as basic with a single dial for the instruments, flat surfaces made from bamboo (designers love a bit of bamboo), batteries for the electric motors under the floor and you have to store any luggage on the roof under a weatherproof cover.

Alfa offers new vintage: the Unique Alfa customisation programme

Mon, 17 Sep 2007

By Guy Bird First Official Pictures 17 September 2007 02:00 No new car for Alfa at Frankfurt? No, but the brand did launch a customisation programme called ‘Unique Alfa’ to make its cars look even better. Three ranges will be offered: Vintage (retro/traditional), TI or Turismo Internazionale (Sporty) and Collezione (fashion and style).

Alfa 100: Eat, drink and celebrate in Milan

Thu, 24 Jun 2010

Considering that Alfa Romeo originated in Milan, Italy, it's no surprise that the city plans to spend June 24-27 celebrating the historic marque's 100th anniversary. We know you'll have your hands full with the festivities, but we suggest dedicating some of your week to enjoying the local cuisine as well. Here are some suggestions.

09-11 Jeep Patriot Right Passenger Side Front Oem Inside Interior Door Handle on 2040-parts.com