1-17" Ford F-150 Steel Spare Wheel! Great Condition! Rare! 3392 on 2040-parts.com
Inkster, Michigan, US
TIRES UNLIMITED
~
offering ~
Selected
listing is for A ONE (1) GOOD USED WHEEL:
WHEEL:
- 17” 97-203 FORD F-150 SPARE STEEL WHEEL SILVER PAINTED STEEL! GOOD
SHAPE USED WHEEL!
- FORD MOTOR COMPANY FACTORY STAMPED
- HOLLANDER #3392
- 2 AVAILABLE!!!!
WITH TIRES UNLIMITED
BUY IT NOW
For ONLY $69.00
shipping included!
CHECK
OUT OUR OTHER AUCTIONS. If you don’t see what you are looking for, visit our
sister store, Tires & Wheels Galore on eBay as well!!!
ABOUT OUR
WHEEL QUALITY RATINGS
Please keep in mind
that pre-owned/used wheels and tires are never perfect and that describing
each imperfection is not possible. The categories below are therefore SUBJECTIVE and
are intended to provide the buyer with a GENERAL QUALITY
RATING upon which to make sound market comparisons
and an educated purchasing decision. Please also note that we list all
product as "Used" including wheels which may or may not have been
repainted or refinished. As with all reconditioned merchandise, every effort is
made to match Original Equipment manufacture specifications, but
we can not guarantee exact color matching for any existing wheel etc. Each
wheel listed is professionally inspected and deemed to be safe and
serviceable for our end user.
WHEEL
- VERY GOOD USED (A): Wheel appears in As New to
Excellent condition at a short distance such as a
typical take-off wheel. Please keep in mind that wheel
may display some minor imperfection upon close
inspection, including: light scratching, scuffing, nick
and/or abrasion from road incident or warehouse mishandling, clear coat
imperfection, brake dust, mounting residue at flange, wheel weight
mark and etc. (RULE OF THUMB: If it's not
visible in the picture - it won't be visible mounted on the vehicle).
WHEEL
- GOOD USED (B): Despite showing some degree
of noticeable imperfection as described above, which may
also include some curb damage (to be pictured in listing), wheel
appears in generally nice condition and finish upon casual
inspection.
WHEEL - USED (C): Wheel displays
visible signs of cosmetic imperfection - but has passed inspection
and is deemed a safe and serviceable wheel. Refinishing is available upon
request.
ABOUT OUR USED
TIRE QUALITY RATINGS
Please
keep in mind that pre-owned/used wheels and tires are never perfect
and that describing each imperfection is not possible. The categories below are
therefore SUBJECTIVE and
are intended to provide the buyer with a GENERAL QUALITY
RATING upon which to make sound market comparisons and an
educated purchasing decision. Please also note that we list all product as
"Used" including wheels which may or may not have been repainted or
refinished. As with all reconditioned merchandise, every effort is made to
match Original Equipment manufacture specifications, but we can
not guarantee exact color matching for any existing wheel etc. Each wheel
listed is professionally inspected and deemed to be safe and
serviceable for our end user.
TIRE
- EXCELLENT USED: Tire is in 'As New' or Take-Off (less than 500 miles
driven) condition.
TIRE - VERY
GOOD USED: Tire has between 8/32's to 10+/32's tread depth, measured at its
deepest point, displays generally even tread wear across the tire surface,
shows little to no chopping or blemishing, and is free of plug and or
patch.
TIRE - GOOD
USED: Tire has between 6/32's to 8/32's tread depth, measured at its
deepest point, displays generally even tread wear across the
tire surface and is free of plug and or patch. Alternately: Tire has 8/32's or
above tread depth, measured at it's deepest point, but may display some uneven
tread wear across the tire surface, chopping, blemishing, and/or has
received one professionally installed patch (as designated in the
listing and pictured) which is determined to be located sufficiently within the
center of the tread pattern (not at sidewall) and tested for integrity.
TIRE - USED: Tire has
5/32's or less tread depth, measured at its deepest point, displays generally
even tread wear and is free of plug and or patch. Alternately: Tire has
7/32's or below tread depth, measured at its deepest point, displays uneven
tread wear across the tire surface, chopping, blemishing, and/or has
received one professionally installed patch (as designated in the listing and
pictured) which is determined to be located sufficiently within the center of
the tread pattern (not at sidewall) and tested for integrity.
ABOUT TREAD DEPTH: We
encourage all buyers to familiarize themselves with Tread Depth prior to
purchase. In the United States, tread depth is measured in 32nds of an
inch. It's a vertical measurement (correctly taken with a tire tread depth
guage - not a coin or ruler) between the top of the tread rubber and
the bottom of the tire's deepest channel. 4/32's is the minimum tread depth
required with Lease Return. ABOUT TIRE TREAD LIFE EXPECTANCY:
The following averages, based on tests conducted by independent tire
companies (and also available on Tire Rack, Goodyear, and Modern Tire
Dealer), are averages for both High Performance and Standard Passenger
tires with proper vehicle alignment and tire inflation under
normal driving conditions. Some of these averages may vary depending
on certain circumstances, and as a result, it is possible to get better or
worse mileage per tire than indicated below.
3/32 5,000
3/32-4/32 5,000-10,000
4/32 10,000-15,000
5/32-6/32 15,000-18,000
6/32-7/32 18,000-21,000
7/32-8/32 21,000-24,000
8/32-9/32 24,000-27,000
9/32-10/32 27,000+
FOR YOUR
REVIEW
WE GUARANTEE YOUR SATISFACTION all we ask is
open communication to resolve every issue both before and
after the transaction.
PLEASE CAREFULLY EXAMINE OUR
PHOTOS we aim to provide
accurate, detailed and representative pictures of the actual
product you're considering for purchase.
COMPARE our QUALITY to VALUE with other listings
and BUY WITH CONFIDENCE
OUR COMMITMENT EBAY ORDERS SHIP the SAME or NEXT BUSINESS
DAY upon transaction
confirmation. We proactively advise our customers in the event of any
delay. All deliveries are care of UPS.
ALL REASONABLE
OFFERS CONSIDERED!
SERVING
Questions??? Please call 313-277-5100 & ask for Justin
Wheels for Sale
- 1996-1998 mustang pony wheels(US $60.00)
- 1996-1998 mustang pony wheels(US $60.00)
- 05 06 07 08 09 10 11 12 13 jetta golf rabbit 16" steel wheel used oem rim 69809(US $77.19)
- Gm factory aluminium 15 inch mag wheels.(US $150.00)
- 06 07 08 09 10 11 suzuki grand vitara 17" silver steel wheel used oem rim 72694(US $77.19)
- Bmw 5-series 09-12, 19" factory oem rim wheel rear #71418 #7842653 *like new*(US $268.99)
Nissan GT-R import fears
Mon, 03 Dec 2007By Motor Industry 03 December 2007 09:43 Bargain hunters rejoice! Nissan's new GT-R costs just £34,400 in Japan - spelling out juicy savings for grey importers in the UK, where the super-coupe is tipped to cost £60,000. Even after the cost of shipping and import duties, that means you could land a Japanese-spec car for around £42-£45k.
Ford Iosis Max unveiled at Geneva motor show 2009
Mon, 02 Mar 2009By Tim Pollard First Official Pictures 02 March 2009 18:00 Ford is serving up a big-bang surprise at Geneva with the launch of the Iosis Max concept car. The third in a series of Iosis show cars, the Max affords our first view of the new 2011 Ford Focus, with a hint of next-gen 2010 C-Max thrown in for good measure. The Iosis Max looks just like the next-gen Focus at the front and heralds some important new styling treatments for all future Fords, its designers have told CAR. The lower trapezoidal grille, for instance, will in future feature these horizontal chromed strakes, echoing the feature lines on the bonnet, and the Blue Oval badge appears more prominently in the middle of the higher, Fiesta-style grille.
NEVS completes Saab purchase
Tue, 04 Sep 2012National Electric Vehicle Sweden AB (NEVS) has completed the purchase of the assets of Saab, but can’t use the Griffin logo. It looks like the Chinese, Japanese, Swedish Consortium NEVS has finally completed the process of acquiring the assets of bankrupt Saab, but it hasn’t quite got all it wanted. We reported last week that the process of acquiring Saab had been delayed as there were still issues over the rights to the Saab log, a logo owned by Scania and Saab Aerospace.