1/2" - 4'x 5' Mighty Matt Auto Insulation - Control Heat Sound Noise And Airflow on 2040-parts.com

 Please Check out our eBay Store for all our sizes and Insulation

 

 

******** NEW ITEM.... 1/2 INCH THICK FIBERGLASS INSULATION WITH ALUMINUM FOIL BACKING ********

 

Selling one (1) sheet, 4' x 5',  20 square feet of 1/2" thick fiberglass auto insulation with an aluminum foil backing.   This is your chance to get a very high quality commercial grade automotive insulation product at a price much less than sold in the retail market.  In fact our price is competitive with the 'bubble wrap' plastic type insulation.

 

We usually use 3m Super 77 Spray adhesive and install the fiberglass side to the panel being covered. 

 

If you order more than one roll/piece of insulation we will ship one continuous length based on the number of rolls ordered, whenever possible.  This will allow you to cut the exact size you need with less waste. 

 

Although Ebay is our current top selling site we also sell at car shows.

 

Our shipping is based on the weight and your zip code.  We do not charge a handling fee!  If you order multiple rolls of insulation the shipping will be combined based on the weight, so your 2nd, 3rd or whatever you order, will just be a couple of dollars more than the single roll insulation , so order what you think you will need the first time and save on the shipping.  We usually ship by UPS to keep the cost as low as possible. 

 

SATISFACTION GUARANTEED !!

 

YOU WILL BE PLEASED WITH OUR INSULATION OR WE WILL REFUND THE ENTIRE PURCHASE PRICE INCLUDING THE SHIPPING COST.

 

 

                      MIGHTY MATT tm

Mechanically bonded glass fiber insulation blanket of uniform density with excellent thermal and acoustical properties. 

Superior performance in operating temperatures up to 1300ºF.

 

The following test were made with our 1/4" thick insulation, not the new 1/2".  

 We will have actual test results for the new 1/2" very soon.   In most cases we still believe the 1/4" insulation will do an excellent job but in an effort to increase our insulation product line we are always looking for insulation to fit our customer's requests.

   

Although I knew from my own experience this product worked beyond my wildest dreams, many people have ask for the 'R' value and heat transfer numbers using this insulation.  This exact information was not available from the manufacturer so I made the following test and was amazed at how effective this insulation really is.   In one of my cars I recorded the temperature on the engine side of the firewall,  just behind the exhaust manifold to be 174 degrees while the temperature on the firewall at the same spot, inside the car was just 69 degrees.  The outside temp that day was 67 degrees.  Since this is only 2 degrees higher I assumed something was wrong with my testing equipment.  Next I used my wife's clothes iron.  Turning it as high as it would go, about 240 degrees, I placed the insulation about 1 inch from the iron and the temp just went up about 2 degrees.  Still not believing what I saw I placed a sheet of the insulation directly on the iron with my hand and was amazed to experience so little heat transfer that I could press the insulation hard against the iron without burning my hand.  I placed 2 sheets of the insulation on the iron and could not feel any heat.  Too good to be true?  This insulation is fantastic.

Characteristics

•  Low thermal conductivity at temperatures to 1200° F  
•  Good drapeability - Conforms to irregular surfaces
•  U.L. Listed - 0 - flame spread, 0 - smoke generated  
•  Non-respirable, 9 micron filament diameter
•  Excellent vibration resistance, will not powder
•  Excellent sound absorption properties
•  Non-alkaline (<0.01%)
•  Low chlorides and fluorides
•  Will not contribute to metal corrosion
•  Odorless-will not absorb odors-clean
•  Will NOT decay, rust, or sustain mold or vermin
•  Resists moisture absorption and mildew
•  Foil backing is very durable 
•  Light weight, 1/4th lb. (04 oz.) per square foot.  
•  Completely made in the USA 

DO NOT BE FOOLED BY OTHER'S CLAIMS OF WHAT MATERIAL IS USED IN THEIR INSULATION.  ASK BEFORE YOU BUY.  WE WILL BE HAPPY TO SEND A SAMPLE.  THE INSULATION HAS NO BUBBLE WRAP AIR POCKETS.  OUR INSULATION IS 100% FIBERGLASS MAT WITH ALUMINUM FOIL BACKING.  BE SURE YOU ARE GETTING THE BEST.  BEWARE OF WHAT YOU ARE BUYING.   AS STATED IN OUR LISTING, 100 % SATISFACTION GUARANTEE.  WE HONESTLY APPRECIATE YOUR BUSINESS.  

It is easy to cut with scissors or utility knife,  really works great and also looks good.   We use this product on the floors , firewall , door panels , trunk , roof , hood , pipes and any other interior areas that need to be insulated. 

Other applications:  Auto exhaust system insulation , resonators , mufflers , flooring and dash , heat shields , turbines , marine industrial furnaces & ovens , filtration , Boat , supercharger covers , hot water heaters , ovens , power generating equipment ,  street rods , hot rods , rat rods ,  race cars

IF YOU ARE NOT SURE ABOUT OUR INSULATION .. PLEASE LOOK AT OUR FEEDBACKS.                                     

Please contact us if you feel the item has not met the description. We are proud of our 100% feedback, so we will refund your total payment after the item has been returned to us.

  

We honestly appreciate your business.