1310 Cv Driveshaft & Sye Kit Jeep Yj Wrangler With Spicer U-joints 1988-1995 Yj on 2040-parts.com

You are buying a 1988-1995 Jeep YJ Wrangler Rear 1310 CV Driveshaft and a Crown Automotive [Rough Trail] SYE Kit.

We build this driveshaft using both American parts and offshore parts just like our competitors at or around the same price but we will not mislead you about Spicer Blue seal u-joints being made in the U.S.A. The Spicer Blue seal u-joints are strong and are a high quality greasable u-joint but we feel you should know the correct information. Although Spicer Blue seal u-joints are boxed in the U.S.A., they are NOT made in the U.S.A. The Spicer White sealed Solid u-joints are the Strongest U-joints made and are made in the U.S.A. 

Please look through our Feedback and see how our customers have liked our Driveshafts we have made for them.

Please note: Driveshafts may be pictured unpainted to show welds and components. The driveshafts come painted gloss black, show quality.

Information:

1310 CV Driveshaft will work on YJ with a 231 T-case. On YJ's from 1988 to 1991 make sure your transfer case does not have the vacuum lines in the rear tail housing. If it does then you would also have to purchase a Posi Lock cable, or change the passenger side front axle to a TJ one piece axle.

Driveshaft will work from 2" to 6" Lift Kit.

Driveshaft comes with a 7" Long Full Spline slip n stub unlike the other Competition at or around the same price.

This Driveshaft comes with Spicer Blue Seal Serviceable U-joints.

This Driveshaft usually ships out within 24 to 48 Business hours after Order is processed.

This Driveshaft also comes with new grade 8 CV Bolts.

This SYE Kit is made by Crown Automotive and comes with everything you see in the picture.

Please e-mail us the YEAR, MAKE, LIFT SIZE, so we can make up the correct driveshaft length for your Jeep.

This Driveshaft is made for a YJ with a Dana 35 differential. If you have a Dana 44 or you are going to install a Ford 8.8 we will need to know this before we can make up the driveshaft. Although this Driveshaft will work on a 2" to 6" lift due to the long slip n stub we use, if you e-mail us the size lift, differential size, and year we will custom make this driveshaft to fit your exact application.

1994 to 1995 YJ's with a Dana 35 have a 1330 series u-joint, unless the pinion yoke has been changed. We will need to know if your pinion yoke is stock or has been changed. If you are not sure please measure across the rear u-joint. The 1330 u-joint series is 3 5/8" wide and the 1310 series is 3 1/4" wide. On 1987 to 1990 you may have to install a TJ axle on the passenger side, or buy a Posi Lock cable due to the Vacum on your 231 might have the lines connected to the rear tail housing.

Note: This Item is for a SYE KIT and 1310 CV Driveshaft, not for the whole T-Case. We just Pictured it this way to show the parts.

Please e-mail us anytime, or call us at 801-310-2578 between the hours of 8:00am to 5:00pm Mon thru Fri Pacific Time. We look forward to doing business with you.

                                      DRIVESHAFTS DIRECT: Direct from the Manufacturer to your Door.