170° Automotive Assembly Rear View Camera Ampire Kcr802- Ntsc, Mirroring, Guides on 2040-parts.com

#name#

This reversing camera with a camera resolution #kamera_aufloessung# and a color resolution of #aufloesung_in_linien# is the view behind the vehicle and thus the inputs and leaving a parking space no longer a problem.

This high-resolution rear camera with protection class #kamera_schutzklasse# is dustproof and waterproof. Thus, it is ideal for outdoor use as a reversing system. The video signal is transmitted via a video cinch cable and is compatible (a RCA / RCA input must be present or can be adapted) as with most monitors or navigation systems.

The area of ​​application is thus virtually no limits if you want to use it on the car, bus, camper, truck, trailer, etc., almost anything is possible.

The metal case is weatherproof, massively produced and additionally equipped with a special lens glass, which protects against corrosion and "blindness".

It comes complete with power and video connection cable and video extension (see delivery).

Suitable for surface mounting

Unlike cameras for undermount installation the image 180 ° rotated. Thus, this camera can be vertically or horizontally to rear doors mounted on bumpers.

Please note!
Vehicles newer date use to power the vehicle exterior lighting one by PWM clocking generated (pulsating) voltage, which is suitable for image sensors / video electronics, or function or screen interference has resulted. According to this proposal, the connection cable should not directly connected to the reversing light but appropriate signal filters are used. These can be found under Accessories.

reviews:

Guide about the "detection angle" / "Viewpoint" with reversing cameras.

Reversing camera with 60 ° detection angle:

To make it as easy as possible to clarify what kind of impact the selected detection angle of the rear view camera, we recorded the representation of three different rear view cameras.

The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..

In contrast, a reversing camera with 170 ° detection angle:

The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region are distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate near range to be able to detect, for example in the license plate bar, or even in the trailer operation to the full swinging when maneuvering.

The middle ground, reversing camera with 120 ° detection angle:

From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the reversing camera or STO STO-IR. For use at the mobile home or the Transportation, we have for example to the rear view camera IR18.