Find or Sell any Parts for Your Vehicle in USA

1949 El Panhead Basket Case!! Matching 49" Frame And Motor!! No Reserve!!! on 2040-parts.com

US $5,000.00
Location:

Branford, Connecticut, US

Branford, Connecticut, US
:

for sale is a 1949 harley panhead wishbone frame and matching '49 engine. THE FRAME: the frame is a late 1949 frame, due to the fact that the two front down tubes have flat spots for where the horn would originally go, in earlier '49 frames the down tubes had tabs welded to the frame for the horn to be attached. the frame is perfectly straight with no cracks, dings, welds. sidecar loops perfectly intact. there are two tabs missing on the frame one on the top of the top motor mount and the other on the neck which would hole the original speedo dashboard. both tabs can be bought for extremely cheap through v-twin or the manufacturer of your choice. all numbers and markings on the frame are intact and have pictures of all. email me if necessary. THE GAS TANK PICTURED IS ALSO INCLUDED IN THE SALE. IT WAS A PAIR OF BOB TANKS NARROWED AND WELDED TOGETHER. THE MOTOR: the motor is a '49 EL 61" panhead. the left engine case had a crack near the timing inspection hole (very common) back in 2001 and was repaired at bills custom cycles in PA. the repair is of excellent quality and couldn't ask for a better job, i also have the receipt for the repair if needed. no right case comes with the motor but all right case parts are here. the flywheels are original fitted with new jims pinion, sprocket and crank shaft. the pinion and sprocket shaft are later model harley that accept timken bearings (keeps vibration, stability of flywheels and reliability in tact). new Carrillo H-Beam rods with new rod bearing cages and rollers. comes with rebuilt harley oil pump. in the cam compartment everything is new included breather, idler, pinion, and cam (slightly above stock performance) gears and all bearings(upgraded to torrington) washers, snap rings etc... original tappet guides and new replacement tappets. cam cover is off a '55 which i removed the ribs for a smoother look. the way i like to build my motors is have everything on the outside be original and period correct and the internals new and upgraded to prevent any problems or just for better reliability, over the years products have gotten better then back in 1949. cylinders are original but need to be honed and fitted to new pistons (not included). heads are original and to be honest haven't touched them but they do need some work (missing two fins) they are fitted with original valve springs and valves. all bolts are new for the motor including timing hole and drain bolts. what you see in the picture is what you get. there are a couple parts missing but not much at all, a right side case, some pistons, pushrods, and rebuilt heads and your good to go. I have tons more pictures but ebay only allows 12 so email me if more pictures are desired.

i have previous registration and bill of sale from last owner if needed. the motor comes with a bill of sale only and any extra paperwork i have.

MUST HAVE A MINIMUM OF 10 feedback to bid, if under 10 feedback email me before bidding

Disregard shipping cost if you choose to have this item shipped to you i will have it checked for actual cost before paying. once payed and cleared item will be shipped ASAP

i will ship but buyer must pay for all shipping charges. U.S.A. SALES ONLY!! NO INTERNATIONAL!! happy bidding

Posted with eBay Mobile

Antique, Vintage, Historic for Sale

Norwegian EV maker Think files for bankruptcy

Thu, 23 Jun 2011

Tiny electric car maker Think Global AS filed for bankruptcy today in its home market of Norway after attempts to keep the company going through recapitalization and restructuring failed, the company said in a statement. It is the fourth time Think has collapsed financially in its 20-year history. "We needed some additional funding and although we had interested investors they were not able to come to the table quickly enough," Think spokesman James Andrew told Automotive News Europe.

Mazda Shinari Concept – RX-9?

Tue, 31 Aug 2010

The Mazda Shinari Concept – pointing the way to the Mazda RX-9? We’ve only just had the news that the Mazda RX-8 has bitten the dust, victim of the upcoming Euro 5 emissions regulations. One less Mazda until we see the rebirth of the RX-7 and a halo model in the Mazda RX-9 in the next year or two.

Volkswagen L1 concept

Wed, 23 Sep 2009

Volkswagen chose the Frankfurt motor show to unveil the revolutionary L1 Concept - a diesel-electric hybrid vehicle constructed from aluminum and carbon fiber.  Weighing 380kg, the L1 can seat two occupants in tandem. They enter through a side-hinging, electrically operated canopy which maximizes aerodynamic efficiency. It has a Cd figure of just 0.195.