1970 1971 1972 1973 Pontiac Firebird Trans Am Front End Suspension Kit - 22 Pcs on 2040-parts.com
Washington, Utah, US
NEED IT RIGHT AWAY? JUST E-MAIL US AND WE'LL BE HAPPY TO DO IT WITH A "BUY IT NOW". IT IS IN STOCK!
This kit is now available with Performance Polyurethane Control Arm Bushings at an additional cost. Please e-mail us for price and information.
THIS IS A NEW KIT, AS PICTURED, AND IT REPLACES THE ORIGINAL SUSPENSION PARTS AS THE CAR CAME FROM THE FACTORY. THIS IS AN ACTUAL PONTIAC FIREBIRD KIT, NOT A CAMARO KIT. THERE IS A BIG DIFFERENCE! PLEASE NOTE THAT THIS KIT CONTAINS ALL 4 TIE RODS AND WE HAVE ADDED BRAND NEW TIE ROD SLEEVES AND HARDWARE TO THESE KITS PER EVERYBODY’S REQUEST! CHECK THIS KIT OUT AT $329 AND UP FROM OTHER AFTERMARKET SUPPLIERS. THIS KIT FITS ONLY 1970 THROUGH 1973 PONTIAC FIREBIRD AND TRANS AM CARS.
THIS KIT CONTAINS ALL OF THE PIECES BELOW:
***INNER LEFTHAND TIE ROD***
***INNER RIGHTHAND TIE ROD***
***OUTER LEFTHAND TIE ROD***
***OUTER RIGHTHAND TIE ROD***
***LEFTHAND TIE ROD SLEEVE***
***RIGHTHAND TIE ROD SLEEVE***
***LEFTHAND SWAY BAR BOLT (LINK KIT)***
***RIGHTHAND SWAY BAR BOLT (LINK KIT)***
***LEFTHAND SWAY BAR BUSHING***
***RIGHTHAND SWAY BAR BUSHING***
***LEFTHAND UPPER BALL JOINT***
***RIGHTHAND UPPER BALL JOINT***
***LEFTHAND LOWER BALL JOINT***
***RIGHTHAND LOWER BALL JOINT***
***LEFTHAND UPPER CONTROL ARM BUSHINGS (2 EACH)***
***RIGHTHAND UPPER CONTROL ARM BUSHINGS (2 EACH)***
***LEFTHAND LOWER CONTROL ARM BUSHINGS (2 EACH)***
***RIGHTHAND LOWER CONTROL ARM BUSHINGS (2 EACH)***
THIS KIT ALSO CONTAINS THE COTTER PINS, RUBBER GREASE SEALS/BOOTS, ZIRC FITTINGS, PLUS THE TIE ROD SLEEVE BOLTS, NUTS, AND CLAMPS.
THIS IS ONE OF THE MOST COMPLETE KITS YOU WILL FIND AT ONE STOP! WE'VE USED THESE KITS OURSELVES AND THEY ARE GOOD KITS!
PLEASE READ THE ITEM DESCRIPTION, LOOK AT THE PICTURE(S), AND DO YOUR OWN HOMEWORK BEFORE BIDDING TO VERIFY THIS WILL WORK FOR YOUR CAR. PLEASE E-MAIL US BEFORE BIDDING IF YOU HAVE ANY QUESTIONS. WE TRY TO BE AS ACCURATE AS POSSIBLE IN OUR DESCRIPTION, BUT CANNOT GUARANTEE THE APPLICATION OF ITEM DUE TO MANUFACTURERS' DISCREPANCIES. ITEM SOLD "AS IS". ALL SALES ARE FINAL AND THERE ARE NO RETURNS. BUYER HAS 2 DAYS AFTER RECEIPT OF ITEM TO NOTIFY SELLER OF ANY PROBLEMS. UNAUTHORIZED RETURNS WILL BE REFUSED AND RETURNED TO BUYER AT BUYER'S EXPENSE.
PLEASE READ THE FOLLOWING BECAUSE THERE ARE NO EXCEPTIONS:
PAYMENT: Payable in U.S. funds only by U.S. PayPal Account ONLY. Payment due in our PayPal Account within 7 (seven) days from end of auction.
Please note we will only ship to the Confirmed Address you have registered with PayPal.
SHIPPING: We sell and ship ONLY to the CONTINENTAL U.S.A. (THE 48 CONTIGUOUS STATES) VIA FEDEX GROUND. EXTRA SHIPPING CHARGES WILL BE ADDED FOR SHIPPING TO ALASKA AND HAWAII! WE CANNOT SHIP TO A P.O. BOX! No Local Pickup.
RETURN POLICY DETAILS:
WE DO NOT ACCEPT RETURNS FOR ANY ITEMS THAT HAVE BEEN INSTALLED OR DAMAGED. WE DO NOT ACCEPT PARTIAL RETURNS. PRODUCTS MUST BE IN THEIR ORIGINAL PACKAGING. PLEASE E-MAIL US FOR A RETURN AUTHORIZATION NUMBER AND A RETURN SHIPPING ADDRESS BEFORE RETURNING. A 20% RESTOCKING FEE MAY BE CHARGED. BUYER IS RESPONSIBLE FOR ALL SHIPPING CHARGES. PRODUCTS MUST BE RETURNED WITHIN 7 CALENDAR DAYS AFTER RECEIPT OF RETURN AUTHORIZATION NUMBER OR RETURNS WILL NOT BE ALLOWED.
Lower Kits & Parts for Sale
1962 chevrolet nova or chevy ii new front end suspension rebuild kit(US $239.99)
1970 chevrolet camaro new front end suspension rebuild kit - 22 pieces(US $219.99)
1960 1961 1962 chevrolet c10 or c20 or p10 pickup upper and lower ball joint set(US $159.99)
1961 1962 1963 1964 1965 corvair pickup van new front end suspension rebuild kit(US $189.99)
1969 pontiac firebird new front end suspension rebuild kit - 22 pieces(US $249.99)
1966 1967 chevrolet nova or chevy ii new front end suspension rebuild kit(US $239.99)
Nissan backs radical DeltaWing racecar program
Wed, 14 Mar 2012Nissan has announced its involvement in a radical new motorsport project, dubbed the DeltaWing, which will race at the Le Mans 24 Hours this summer using Nissan power. The car is the work of Ben Bowlby who originally designed the car as a proposal for the 2012 IndyCar racer, which has since found the attention of Nissan after its rejection by the American race championship. The headlines of the design are that it's half the weight and has half the aerodynamic drag of a conventional racer and is therefore far more efficient.
Mitsubishi Compact Crossover revealed
Thu, 29 Oct 2009The new Mitsubishi Compact Crossover Mitsubishi is working to re-align itself in the market place. It wants to be seen as a manufacturer of ‘environment-friendly passenger cars & crossovers’ instead of an SUV focused manufacturer. It sees cars like the i-MiEV, Colt, Lancer, Grandis and Outlander as the future, although it intends remaining in the ‘Authentic off-roader’ segment with cars like the Shogun.
BMW M5 (& BMW V10) production ends
Thu, 08 Jul 2010The 2005 BMW M5 - production has now finished It’s been the most successful BMW M5 ever, this E60 M5. More successful than even the E39 M5 though it’s been in production for a year less. But now it’s come to an end.