Find or Sell any Parts for Your Vehicle in USA

1970 350 Rebuilt Engine Camaro Chevelle Nova 300hp Cre on 2040-parts.com

Location:

Klamath Falls, Oregon, United States

Klamath Falls, Oregon, United States
Condition:Remanufactured Warranty:No

Feel free to ask any questions or to make an offer.

I have for auction a rebuilt 1970 350 4 bolt main engine. The block is a 3970010 4 bolt main block with "N" main caps which means nodular iron main caps. These caps are better and stronger than the regular main caps. The block date is C-18-0 which is March 18, 1970. The code up front is CRE which codes out to be a 300hp 350 with an automatic transmission and came in Camaros, Chevelles, and Novas. The cylinder heads are casting number 3927186. They have 1.94 x 1.50 valves. The heads are closed chamber 64cc heads. The crank is the factory cast crank and is standard on the mains and standard on the rods. The pistons are the stock factory type flat tops. The engine will have 10.25-1 compression just as it did from the factory. Pictures show all casting numbers, date codes, and suffix code. In one picture you will even notice the factory crayon marks on the side of the block that show the CRE code. I believe I have the original intake also. If I can find it I will include it with engine. Thanks for looking and feel free to ask any questions.

Here are the specs on engine:
Block freshly bored to .030
Crank freshly polished
New flattop pistons with moly rings
New cam and lifters. 300hp stock specs
New oil pump
New timing set
New rod bearings
New main bearings
Heads rebuilt and have positive valve seals
All new gaskets
Fresh paint job
Stock oil pan
Stock valve covers
Stock timing cover
New cam bearings
New freeze plugs
Block was tanked and magnafluxed
Heads were cleaned and magnafluxed

This engine is as close to the factory specs as possible. Would be an excellent engine for a restoration of a 1970 Camaro, Chevelle, or Nova. This was a factory engine that was pulled apart and rebuilt back to as close to factory as possible.

Buyer to setup and pay for shipping. I will crate engine for shipping.

Audi A7 Sportback to break cover on July 26

Tue, 20 Jul 2010

The Audi A7 Sportback will be revealed on July 26 in Munich, Audi confirmed on Tuesday. This is the sleek, much-anticipated sedan with a couplelike vibe set to arrive for the 2012 model year. The car was previewed by the Audi Sportback concept in 2009.

VW to unveil Beetle Dune concept at Detroit Auto Show

Thu, 09 Jan 2014

The jury is out as to whether Volkswagen's Beetle Dune concept is more Frank Herbert or Bruce Meyers. Equipped with all mod cons, it’s a far cry from the simple, tough desert-race-inspired Bugs that popped up like aggro sandworms during the 1970s. On the other hand, it's still got four gasoline-burning cylinders and two-wheel drive.

2012 Lexus GS 250 Guangzhou debut

Mon, 21 Nov 2011

2012 Lexus GS 250 debuts in China this week We’ve had the reveal of the 2012 Lexus GS 450h, and we’ve even reported on the US GS 350 and that the UK and Europe are to get an entry-level GS – the Lexus GS 250. But so far we’ve not had a proper reveal of the GS 250, just a bit of information and the assumption it’s a less powerful and less well-equipped version of the GS 450h. Which it is, and this week we get to see exactly what the entry-level GS offers with its public debut at the Guangzhou Motor Show in China.