Find or Sell any Parts for Your Vehicle in USA
Vintage Car & Truck Parts > Air Intake & Fuel Delivery

1970-71 Mopar A, B, Or E-body 340 4-bbl Air Cleaner Assembly, Cln, No Dents, Vgc on 2040-parts.com

Location:

Stillwater, Minnesota, United States

Stillwater, Minnesota, United States
1970-71 MOPAR A, B, OR E-BODY 340 4-BBL AIR CLEANER ASSEMBLY, CLN, NO DENTS, VGC, image 1
“Here's a very good condition original used 1970-71 Mopar A, B, and E-body hipo 340 4bbl air cleaner assembly, of base, lid, and air filter. No dents or bad dings. No aterations or bad pitting. Not rusty. Nice lid that fits and seals well. Wrinkle finish is a little unevenly applied and worn off in a few areas. A little white paint stuck on the bottom. Use as is, or blast it clean and then repaint it in its correct black wrinkle finish. Should look really nice then, especially with a new pie tin on top!. Nothing cut or altered. Hard air cleaner to find any more!”
Brand:Orig Mopar, for 1970-71 A, B, and E-body 340 4bbl. Placement on Vehicle:Front Manufacturer Part Number:A complete assembly, or base, lid, and filter. Surface Finish:Cln piece, not pitted or rusted ever. I'd repaint Interchange Part Number:Nothing is dented, badly dinged, or bent. Warranty:Yes Other Part Number:Nothing cut or altered from stock. Low mileage on Country/Region of Manufacture:United States

Up for your auction bids is this very nice original used 1970-71 Mopar A, B, and E-body 340 4-barrel high performance factory air cleaner.  Consists of the base, lid, and air filter. Sorry, no pie tin for lid, but they are readily available fairly inexpensively.  Looks to have possibly been a fairly low mileage piece.  This is the round air cleaner with two oval openings in it where the snorkels would normally be on the 383-440 air cleaners of the era.

Featured 1970-71 340 4-bbl air cleaner has no rust or pitting.  A very clean piece original as many of these go.  Not dented or badly dinged.  Lid fits nice and seals fine.  Nothing cut, drilled or bent--like some original air cleaners you see. The wrinkle finish on this is a little uneven and run in a few areas.  There is a little wear in finish in a few spots, and a few spots of white paint stuck on the underside.  You certainly could used this just as is for decent drivers.  For real nice cars however, you may want to blast it clean and re-paint the black wrinkle finish.  With the addition of a nice new pie tin on top, it should look about mint.

This is a very hard air cleaner to find any more, especially this clean, straight and original.  Available here at a realistic opening bid price too, compared to some your will see out there.  Be sure to put in that good bid today!  Satisfaction warranty to boot, so bid with confidence.  Thanks for stopping in to look and bid! 
_______________________________________________________________

*Check out my other select 1963-74 Mopar A, B, C, and E-body parts. A little something for everyone, at realistic opening bid and B.I.N. prices!

*Always an interesting selection of quality-select parts from out of my extensive 33-year collection of Mopar parts. One of the largest and most varied in the upper Midwest! From top to bottom, and from inside to outside, I've just about had it ALL!!

Please be a good eBayer and be sure to leave me feedback after you have received your item(s). I will then be sure and do the same for you! Please note that I require payment to be made within three (3) days on all my closed auction items, or an unpaid item report will automatically be noted to eBay.

HAVE A COLLECTION OF PARTS TO SELL? I'M ALSO ALWAYS A BUYER FOR QUALITY USED, REPRODUCTION, AND NOS 1963-74 MOPAR A, B, AND E-BODY PARTS TO ADD TO MY DIVERSE INVENTORY. FROM A SINGLE ITEM TO A BARN FULL, LET ME KNOW WHAT YOU HAVE OR KNOW OF. FEEL FREE TO CALL ME AT PH: 651-429-4235 FROM 10 A.M.-9 P.M. CENTRAL TIME, OR E-MAIL ME AT:  PSAP AT COMCAST DOT NET, TO DISCUSS THEM OR TO ASK ME ANY QUESTIONS YOU MAY HAVE ON MY CURRENT PARTS LISTINGS. THANKS!

Mitsubishi Concept-CX (2007): first official pictures

Fri, 31 Aug 2007

By Ben Pulman First Official Pictures 31 August 2007 10:55 The Concept-CX looks like a Lancer supermini? Close, but no cigar. This is Mitsubishi’s Concept-CX and it shares the frontal styling (which the company describes as ‘a tight and powerful wedge’) and twin-clutch gearbox with the forthcoming Lancer Evo X.

2012 Honda Civic 2.2-litre i-DTEC with just 110g/km CO2

Fri, 12 Aug 2011

2012 Honda Civic - cleaner, greener, more powerful & more economical Honda are taking the launch of the new Civic for 2012  properly seriously, and looking to make it a properly good alternative to stuff like the Focus and Golf. That means the 2012 Honda Civic is going to have to handle properly as well as being very well put together. And on that score Honda are promising improved ride and handling for the 2012 Civic (despite a less than cutting-edge suspension at the back) and say it will be more stable and precise. Which all sounds good.

Honda Jazz (2008): first official pictures

Tue, 05 Aug 2008

By Tom Richards First Official Pictures 05 August 2008 12:29 Here are the first pictures of the all-new Honda Jazz, the follow-up to the super-clever supermini that’s been on sale since 2002. You’ll have to wait until autumn 2008 for Honda’s UK dealers to launch the Jazz, but CAR has already pored all over the new supermini to bring you a full preview of the latest mini. So what’s the new Jazz like?Our first impressions are that it’s an easy-to-use model – with first-rate ergonomics.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.04 s, 11811 u