1979-1981 Pontiac Firebird Ta Trans-am 5 Piece Fender Wheel Flares Spoiler Set on 2040-parts.com

 1979-1981 Pontiac Firebird TA Trans-Am 5 piece FENDER WHEEL FLARES WITH INTERNAL BRACKETS - SPOILER SET
Ground Effects Flairs~ SHIPS FAST & FREE ~Next Biz Day!

WE ARE THE ONLY COMPANY WITH THE CORRECT RUBBER BEAD WELTING!!!


Pontiac Firebird T/A Trans-Am

5 Piece Front & Rear Wheel Fender Flares with the Internal Bracket Upgrade

Ground Effects Set

with OUR EXCLUSIVE Moulding & Hardware

This listing offers FRONT, REAR & CENTER Fender Flares/Flairs,

which fit:

1979-1981 PONTIAC FIREBIRD TRANS AM

Set of 5

HAND-LAID, TOP QUALITY Fiberglass

Right, Left, Front, Rear & Center Aftermarket Parts


BETTER THAN ABS!

This 5-piece Kit with the internal brackets upgrade was produced to replace the original wheel and nose spoilers on a Trans Am,

and bolt right up using all of the factory bolt hole locations. Our heavy duty spoilers are made of durable HAND-LAID fiberglass,

and have a black gel-coat finish.  Parts must be lightly sanded and painted to match car color.

Kit includes installation instructions and hardware, our EXCLUSIVE black (and paintable) 3/8″ wide OEM Style bead welting,

with our unique double sided mounting 3M tape on the back to make installation of the Rubber Welting a breeze!


Furthermore, we are the ORIGINAL DESIGNER & MANUFACTURER of MOST of these replacement parts that

are being sold on ebay, as well as many other retail marketplaces worldwide. 

Certain competitors have purchased from us over the years, only to have our parts copied, moulds reproduced,

(these are secondary copies x 2, thus their fit will never be as accurate as ours),

then have them mass reproduced in factories in China and Taiwan, of very cheap ABS plastic. 

We guarantee the fitment of our products to be far superior

to any copies on any market, so you'll have the peace of mind knowing you are truly buying the best. 

Our competitive pricing is just one incentive, but perhaps more importantly in the long run,

is ending up with the highest possible quality for your project vehicle.  We WANT you to be happy!

As always, YOUR SATISFACTION is GUARANTEED!

moulded into splash pan design

 

IN STOCK!

SHIPS FREE


SHIPS FOLLOWING BUSINESS DAY!


* HIGHEST QUALITY  ~ BETTER THAN ABS*

* BRAND NEW *

* DURABLE * FIBERGLASS * CUSTOM MADE *


Proudly made in the USA

SATISFACTION GUARANTEED!


Please Note:

These are custom made, brand new aftermarket parts.

They are made of durable, HIGHEST QUALITY, HAND-LAID fiberglass, not cheap ABS Plastic.

They will arrive to you in a black gelcoat finish & satin primer,

which MUST be Lightly Sanded Before Paint & Install

*This is the case with ALL fiberglass/fiberflex/plastic parts, but not disclosed by all sellers.


Kit includes Mounting Hardware, Instructions and OUR EXCLUSIVE BEAD WELTING!


Why buy Our Fiberglass Flares over ABS Vacuum Formed Plastic?


The Cold Hard FACTS:

The factory OEM units were made of very poor quality.  At that time, GM was only learning and experimenting on how to use plastic materials on automobiles, and they made many mistakes. The GM flares were made out of a very thin ABS plastic.  So thin, that the bead welting was attached with staples at the ends. These OEM flares would quickly become brittle from the heat and would easily break (especially on the ends), crack, warp, and become wavy from exposure to sun and the elements. While there are some aftermarket ABS vacuum formed plastic replacement units available on the market, and it's possible that there may be
some good ones out there, many of our customers have reported to us numerous problems with ABS aftermarket units that they had purchased;  Namely, that they DO NOT fit properly, are wavy right out of the box, and in many cases, have small dimples all over them caused by the vacuum holes in the mould surface acting on the hot plastic.
All of these defects can require A LOT of costly body work to make them look decent, and still you're left with a thin, inferior plastic part that may not last long or fit properly.

Our fiberglass units are made of extremely high quality hand laid fiberglass and are very strong. They are smooth and straight, have NO dimples on the surface and they fit properly, just like the OEM units.  Also, fiberglass is a much better surface to work with as far as paint and finishing work goes, and it can even be easily repaired if broken, unlike ABS.  The OEM grey rubber Bead Welting was also a BIG headache to deal with, as it would rarely stay in place during and after the installation, despite the staples used to hold it down on the ends.  Our Bead Welting, which is exclusively made for us, is BLACK, which many prefer to leave unpainted, but you can paint it as well. It comes with pre installed 3M double sided tape on the back to make it stay in place during and after the installation!  Bead welting is not included for the Center Spoiler, but is for the 4 fender flares.

IF YOU HAVE ANY QUESTIONS, PLEASE MESSAGE US!

Pontiac Trans Am Parts
These parts are proudly made in the USA, by a family owned business with 28 years experience.  If for any reason you are displeased, please don't hesitate to contact us. We are here to help.  We offer a no hassle return policy, but please make sure you are buying the exact parts you need, as return shipping will only be paid by us if it's an error on our part. 

Please call 786-464-9942 or 305-934-8662 with any installation questions.

Please pay within 7 days.

Paypal Preferred. 

Quick, Easy Set Up with ANY Credit Card.


Shipping time varies depending on your proximity to us, but you can expect your shipment to arrive in the Continental USA in approximately 7-10 business days after cleared payment. If you live in Hawaii, Puerto Rico, Alaska, Guam or the Virgin Islands, please contact us for a shipping quote.


Thanks very much for your interest!