1982-93 Chevy S10 S15 Bench Seat Upholstery on 2040-parts.com

1982-93 Chevy S10/S15 Bench Seat Upholstery - Standard Cab

 Front Bench Seat

1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993

No headrest covers included - contact us if you would like to add them

Black Sierra Vinyl

This upholstery is designed for a custom fit in the original style and made to exact specifications.  All of the patterns follow the factory pleat design, sewing pattern and factory attachment points.  If the set is vinyl then it is an original reproduction.  If the set includes woven cloth or velour inserts then readily available materials are used.

This upholstery is a perfect replacement because it is not just a cover - it is real upholstery.  Just slip your old upholstery off and slip these brand new ones on.  This is a DIY project for most people. 

This set is Black Sierra Vinyl

Features:

• Sierra Vinyl
• All upholstery is brand new and factory direct
• Custom made using original patterns and original pleat pattern and in some instances improvements have been made
• Exact dimensions with 1/2 inch foam behind the material for a perfect reproduction
• Offered in original material or current equivalent
• Made using the original factory attachment points
• Complete instructions included
• Hog rings and pliers are included to complete the task
• Free fabric samples to be sure you are satisfied with your color and fabric selection
• Your order will be placed in the above color unless you request otherwise at the time of order.

OTHER VINYL COLOR CHOICES - SAME PRICE

WE CAN DO OTHER CUSTOM COLORS AND FABRICS ON ALL UPHOLSTERY

SEAT UPHOLSTERY INSTALLATION

The seat upholstery is made to fit as tight as the originals.  Do not pull at seams excessively as it is possible to tear upholstery at these points.

1.      Remove the seat from the vehicle and separate the seat back from the bottom.

2.      Remove the old seat upholstery and hog rings – note the fastening points.  New upholstery will fasten at or near these same locations.

3.     Make any necessary repairs or replacements to the pads, springs and frame.

4.     The backrest upholstery and seat upholstery are not interchangeable.

5.     Turn the backrest upholstery inside out and place on top of the backrest.  Slide down evenly while unrolling the upholstery working each side until they are even.

Install hog rings where required working from the center to each side.  Wherever there is Velcro for an attachment the hog rings are not required.  Adjust the Velcro to align the back rest pleats with the bench seat pleats.

6.     Turn the seat bottom upholstery inside out and place on the front of the seat.  Make sure the center of the upholstery is aligned with the center of the seat back upholstery.  Pull the upholstery over each front corner working each side toward the back until they are even.  Install the hog rings one at a time where required and start in the center working toward the sides.

Note:  If your upholstery set has a plastic “J” channel there are no hog rings required in that area.  Simply snap the plastic channel onto the metal flange on the bottom of the seat frame.

7.      Re-assemble the seat and install back in the vehicle.

Installation is easier if the upholstery is warm.  Vinyl has more elasticity and is easier to contour.

A thin layer of plastic put over the cushions will help make the seat upholstery slide down over the backrest and seat pad.