1986 Decals Stickers Trx70 Trx 70 Fourtrax 4 Wheeler on 2040-parts.com

 This kit is specific to the 1986 TRX70 but can be used on the 87 as well. Also shown is an Original trx70 with the oem decals..this set was built using the photo as shown.. They consist of all  decals shown    These decals have long been discontinued from Honda. They are made of Printed vinyl and Laminated for protection to last  many years to come. Many  hours of painstaking work went into making this set. The size and color are right on. .  Now is your chance to dress up that old peeling,faded plastic on your 70.

.                Application instructions... First things first, These consist of three things. The white paper is the release liner, The decal is in center, The top layer is the Application tape.Make sure vehicle is at or above 65 degrees. Make sure areas are free of wax and or grease.  Remove old decals and adhesive from motorcycle. Wash with soap and water then dry. Now using a low lint paper towel wipe area with Isopropyl Acohol ( Rubbing Alcohol) , the area is now ready for application. Take care not to dry  wipe as this causes static electricity.If you get static just rewipe with Alcohol.  Take the decal and carefully remove the release liner. Position decal just above surface , not quite touching it. And gently lay down decal. Using a credit card (or bank card etc.) start from the center and work outward in both directions.   Then remove the Application tape by pulling it back on it self at 180 degrees. Do not pull straight up.  If you see any air bubbles they should go away in a few days. Now stand back and admire! Ps. Feedback is always appreciated..