100%AUTHENTIC  PRODUCT PRODUCT DESIGN: R34 STYLE FITS:1992-1995 HONDA CIVIC 2DR COUPE   Includes 1 x Front Bumper  1 x Rear Bumper  2 x Side Skirts (Left/Right))   Brand New   Pliable FRP(fiberglass reinforced plastic) Product   Gel-coat finished   Aluminium mesh grill insert included where applicable

*WOW!!!! FREE ALUMINUM GRILL MESH WHERE APPLICABLE

Material ( FRP ) FIBERGLASS REINFORCED PLASTIC AIT Plastic resins -AIT special plastic resin is a hybrid form of polyester resin which has been toughened with epoxy molecules within the main molecular structure. AIT resins offers better resistance to moisture absorption than regular polyester resins. Gelcoat - provides high impact strength, excellent gloss, it is water resistance and helps prevent blisters from forming after laying the fiberglass mat. Benefits of Fiberglass: Does not expand or shrink with temperature change. Does not absorb water. High strength to weight ratio. Non-flammable. Chemical resistant (except for hydrofluoric, hot phosphoric acids, and strong alkaline substances.) Electrical insulator Vinyl Ester Resin - This gives superior flexibility and strength than that of polyester resin. Multi-Layer Fiberglass - Our pieces have 4 oz. layers of hand-laminated fiberglass with a plastic gel coat finish. Strong Gel Coat Finish - This results in a SMOOTH finish and adds extra strength to the part! Please be careful because other manufactured finished body kit parts will have orange peel rumples. Fitment - Our pieces have a much BETTER QUALITY fit when compared to competitor products.

SHIPPING PRICE: IS FOR lower 48 states. FOR Hawaii, Alaska,Puerto Rico,Canada and ALL International areas will require us to obtain individual quote from our freight carrier. * Please make sure you provide  your correct info for shipping CORRECT NAME,ADDRESS AND VALID TELEPHONE # , YOUR ORDER WILL NOT SHIP UNLESS YOU COMPLETE ALL CORRECT SHIPPING DETAILS *We are not responsible for any extra costs caused by incorrect shipping information. *If you have any question like changing your ship to addres, Please contact us within 24 hours after you paid  *We do not deliver to APO/FPO/PO BOX OR MILITARY BASES, please provide your physical Shipping address. We deliver to both home or business locations. *All listings advertised are for ship out only, if interested in doing a local pick up price varies . Please email us through eBay for WILL CALL PRICING

Shipping Damages Please inspect the item upon delivery before signing the receipt.DO NOT SIGN UNTILL YOU INSPECT ITEM(S) Make Sure You ->Refuse delivery if the item is damaged and make sure you note refused do to damages upon freight & we will reship you a new Item(s)asap! as long as you follow proper instructions *Contact y2kzigzag within 24 hours to file a claim request.Please make sure to include your item #  Failure to comply with this policy may result in a denial for damage claim. *All returns must be approved before you ship any item back to us.Return item must be issued by y2kzigzag *If you ship an item back to us without contacting us prior to shipping, we will refused *Shipping, handling, and insurance charges are not refundable. *All Order Returned will be charged return shipping. *All returns are subject to a minimum of a 20% restocking fee. *All shipments are made with a signature required. *All our products requires professional installation and is highly recommended. Buyer assumes all risk on shipment and usage. All items are as is with no warranty *images are for references only. If you are looking for a exact specific vent or grill, please contact us before making your purchase. Aerodynamics and ground effects are shipped unfinished and requires prefitment predrill own holes prep-work & priming before painting Installation Front Bumper/Rear Bumper GUIDE Inspect bumper for all bolts, screws and clips holding the bumper to the rest of the vehicle. (Make sure to have the proper tool to for disassembly) Proceed to remove all fasteners and the actually bumper or bumper cover. As you start to test fit the new bumper, please make sure to inspect the section where the part will be place to make sure nothing interferes with the installation (i.e. hanging wires or hoses and splash shields, etc.) Carefully proceed to install the new bumper, making sure that there are no interference from other components on the vehicle. Some installation will require removal or repositioning of factory components, like impact absorbers, reinforcement bars, horns or fog lights. If any component is interfering with the installation, remove these components and proceed with test fitting the bumper (Make sure to reinstall all vital components back in its place or new location. Some products are meant for show and off-road purposes only. Removal of any factory safety components are at your own risk. ) Most aftermarket bumpers are mounted the same way as the factory bumpers, so drilling the right hole in the proper location is key to having a good installation. With the bumper mocked up in place, make sure it lines up properly with rest of the panels and lights of the vehicle. (Some areas of the bumper are purposely made with extra material to lower the risk of damage during transit. Some bumpers might need to be shaved or filed down in some areas to insure a good fitment.) When you are satisfied with the fitment, mark the holes needed for the installation and cut or drill accordingly. (Be very precise in making hole, as this will determine the accuracy of the fitment to the other panels of the vehicle) After holes have been drilled, your part is now ready to be prep for paint. Because of the characteristic of FRP composites, you would need to block (sand and fill, etc.) the whole bumper to ensure smooth and even application of paint. After the paint has dried, you are ready to install the bumper on to the vehicle. After part installation onto vehicle, you may wet sand the clear coat then buff to achieve the shine. Check all other component that needs to be attached to the new bumper. If other existing factory parts are vital and will not attach to the new bumper, you will have to fabricate brackets or mounts to secure those parts. Check if everything is secure and all parts installed. And you are done! Installation of Side Skirts GUIDE Another aspect of installation to point out is the factory rocker panel or rocker moldings. Some install will require removal or these panels and some will require the panels to be installed. This is very important since some vehicles might not come with these panels and will require it to be purchased from the dealer. So consult with your distributor for the requirements needed for installation. Mock up the side skirt to see if it’s going to install properly. If the factory rocker panel is interfering with the installation, you are going to have to remove it. If the side skirt looks like a little short at the edges (where it wraps around the wheel well), you might be able to shave a little bit off the corner of the side skirt for a proper fit. Install the side skirt using screws on each end right where it wraps around the wheel well. This is the part where you might need to lift the car and take the wheels off. There are also a few other places to secure the side skirt, and this will depend on each individual style and application. Some might require screw on the factory rocker panels, the actually door jamb or anywhere else that is not visible when you have the doors closed. Some side skirts will have concave indentations for using rivets and filled after with body filler. After completing installation check door clearances

Payment Method: PayPal *We accept PAYPAL as only payment method. All item(s) will be held 3 days for payment with an unconfirmed address. *Unpaid auction will be forfited and unpaid dispute will be filed to ebay. *All payments are expected within 7 days after the last winning auction is closed. * If other payment method, please contact us prior to placing a bid. *For all California state buyers must pay sales tax.   CONTACT US email us through ebay If you have any questions or concers please send us a message and we will reply back as soon as possible within 24 hours. Please make sure to leave us possitive feedback.

TERMS & CONDITIONS All products sold are aftermarket products and intended for off-road or show use only. Vendor is not liable for any damages or injury as a result of these products. Purchaser is responsible for complying with any/all local, state, and federal laws regarding the addition or modification of parts. We disclaim any liability from the removal of reinforcements, bumpers, turn signals, and other safety equipment on the vehicle. Professional installation of body kits and body related parts (i.e. bumpers, side skirts, hoods, fenders, etc.) is highly recommended. Hood pins are highly recommended for aftermarket hoods. Vendor is not responsible for any items damaged during installation.