Condition:New Brand:Ford Manufacturer Part Number:17271C-K

$$$$$ FREE SHIPPING $$$$$

In order to keep your speedometer functioning correctly the proper speedometer gear should be installed!

Made in the USA

Product Description

21 Tooth Speedometer Gear & Clip Kit
Have you swapped in a set of 3.73 gears in your Ford Mustang? Or maybe a set of 4.56's. Pick up this 21 tooth speedometer gear kit today! When you change the rear end gears in your Mustang you will need to re-calibrate your speedometer by installing a new speedometer gear. Our Mustang speedometer gears are inexpensive and only take a few minutes to replace! Check out our speedometer gear installation instructions on how to change the speedometer gear in your Mustang.

Gear & Clip Combo

Unlike other shops, when you purchase a speedo gear the speedo gear clip is included! Don't mess around with broken or missing speedo clips and don't bother purchasing them separately, order today and get everything you need for a clean speedo gear install all at once!

Note
- This is the speedometer DRIVEN gear.

Application
- Fits 1983-1995 Ford Mustangs

Benefits

Corrects Speedometer Readout
15 Minute Install

Features

Includes Speedo Gear Clip

What's in the Box

(1) Speedo Gear
(1) Speedo Gear Clip

1983-95 Mustang Speedometer Gear Installation Instructions

Overtime your 1983-1995 Mustang will require some repair. One of the most common components that end up failing is the speedometer gear. Follow along with us step by step as we replace this key component with a high quality replacement speedo gear..

Tools Needed:

11mm socket or wrench
Small Flat Tip Screwdriver

Step 1:

Carefully raise and support the vehicle.

Step 2:

The speedometer gear is located, on the driver’s side of the Mustang's transmission tailshaft.

Step 3:

Use an 11mm socket or wrench to remove the securing tab to the VSS sensor and speedo gear.

Step 4:

Pry and remove the retaining clip from the gear.

Step 5:

Install the correct speedometer gear and retaining clip.

Step 6:

Lubricate "O" ring seal and reinstall VSS sensor and gear in reverse order

Ford completes sale of Volvo to China's Geely

Mon, 02 Aug 2010

Ford said today it has completed the sale of Volvo Cars to Zhejiang Geely Holding Group for $1.8 billion. Divesting Volvo completes Ford CEO Alan Mulally's strategy of exiting European luxury brands to focus on the core Ford brand, following the U.S. carmaker's 2007 sale of Aston Martin, and of Jaguar and Land Rover to India's Tata Motors Ltd.

Unique Rolls-Royce rolls out for Masterpiece London event

Mon, 27 Jun 2011

There's no shortage of exclusive sheetmetal coming out of the Rolls-Royce factory in Goodwood, England. But once in while, something a little more special than the rest comes to be. For the Masterpiece London art-and-design event, Rolls built a bespoke Phantom Drophead coupe meant to capture the essence of the weekend getaway.

Current MINI Hatch production ends

Thu, 28 Nov 2013

MINI has built over 1 million examples of the second-generation MINI Hatch, but now the very last one has left the production line in Oxford. It will soon be replaced by an all-new – and much larger – third-generation MINI Hatch, which was launched to the press and public at the Oxford Plant on 18 November 2013. New 2014 MINI revealed in pictures On Bing: see pictures of the MINI Hatch Unlike Lamborghini, which announced the end of Gallardo production earlier this week, MINI has neglected to tell us what kind of Hatch the final model was.

1993-95 Ford Mustang 21 Tooth Speedometer Gear & Clip Kit Manual Transmission on 2040-parts.com