1997 Honda Crv 4wd Differential Transfer Case Real Time Awd Diff Oem on 2040-parts.com
Orange Park, Florida, US
|
This DIFFERENTIAL TRANSFER CASE REAL TIME AWD DIFF is from a 1997 HONDA CRV with a AUTOMATIC Transmission W/ 4WD. BLUE Exterior with a GREY Interior. This car had generation years from 1996-2001 in the United States. Most parts will interchange, but we cannot be held responsible if they do not. Please note what our parts came off of to help determine your interchange. Thanks! Terms and Conditions All merchandise is used unless otherwise noted.
Items do not come with instructions Professional installation and/or assistance is strongly suggested. Please note, buyer assumes all risk and liability if they decide to install it without professional help. There is no warranty for self-diagnosis. We will warranty our part if the part is defective, not if it does not solve the problem with a vehicle. Most part warranties will incur a replacement part if it is in stock. Returns The buyer must notify us within 10 days from the date the item is received for any return. Items must be returned in the same condition as bought from us. All returns due to our error will receive a full refund, including shipping. All other returns will incur a 25% restocking fee and no reimbursement of shipping fees as well as the buyer will pay for return shipping of item. Warranty on electronic devices are void if identifying mark or label is removed or has signs of tampering. Shipping We ship all of our packages UPS, USPS, FEDEX, and GREYHOUND. Items that are over 38' will most likely need to be shipped using Greyhound Bus Package Express services, due to its extra large size, once it is all boxed up and protected for shipping. This would keep the shipping to the amount that it is listed in the auction, and you would need to pick it up from your local Greyhound Bus station. We appreciate your interest in our item. We insure everything we ship. If your item arrives damaged, broken, or in any other way than it was pictured, do not hesitate to contact us as soon as you receive the item. We work hard with the shipping companies to make turn around time on shipping problems as fast as it can be. We will almost always need picture proof of how your item arrived. Please document as much as possible and take pictures. Customer Care We strive to do whatever it takes to get the item to you and hope that you are satisfied with your purchase. If you receive your product and are not satisfied, please contact us first BEFORE leaving any type of feedback. We will do whatever it takes to rectify the situation and earn that 5-star rating from you. -No refunds after 21 days. -All refunds subject to 25% restock fee. -No refunds allowed on any incurred expenses of labor. -All returned parts must bear our identifying mark. -We reserve the right to replace incorrect, defective, or otherwise unsuitable parts before issuing a refund. -The color of the part is not guaranteed to match. -Warranties are non-transferable. -Return freight arrangement and charges are the responsibility of the customer. Unless agreed to by import.mechanic prior to the return. -Buyer is obligated to check and replace all fluid levels, gaskets, seals, timing components, filters, and pumps. ENGINE: Warranty Void unless: All External parts that are worn, defective, different or missing are replaced and Radiator flow tested by Radiator Shop (warranty requires dated receipt). Sold as interchangeable long block, year and model may differ; Warranty Limited to 30 days from purchase date; unauthorized dismantling of heads and block void the warranty. Warranty does not cover overheating issues. If heat tabs are melted or removed, warranty void. Warranty does not include switches, sensors or any labor charges. Inspect seals and replace, warranty does not cover any type of gasket or seal. Warranty does not cover negligence or abuse of unit. We do not warrant suitability of engines or other parts for compliance with California or other states Smog regulations. This determination is the customers’ responsibility and must be done prior to purchase. TRANSMISSION: This transmission is as an interchangeable unit with a 30 day warranty. We guarantee only what Year, Make, and Model we pull our parts from. Torque Converter must be properly seated and aligned to the front pump. Cooling lines must be flushed of debris and all old fluid before installing. Some will come with NO fluid, please check and fill fluid to manufacturer levels. Failure to do any of the above VOIDS WARRANTY. This warranty does not cover fluid leaks, switches, sensors or any labor charges. |
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Differentials & Parts for Sale
Motive gear gear ring and pinion 4.10:1 ratio gm 9.5" 14-bolt truck set(US $189.97)
Gm oem 26046759 axle shaft bearing(US $47.31)
Powertrax lock-right locker steel 1530-lr suzuki 6.9" 26 spline(US $295.92)
Moser engineering mini spool ford 8" 28-spline 5m8928(US $119.97)
Richmond gear ring and pinion gears gm 8.875" truck 12-bolt 4.10:1(US $214.97)
Richmond gear gear ring and pinion 5.13:1 ratio dana 60 4 series set 79-0025-1(US $413.99)
Ferrari Enzo abandoned in Dubai is NOT for sale
Sun, 29 Apr 2012The Ferrari Enzo abandoned in Dubai The Enzo Ferrari abandoned in Dubai for 18 months, and reportedly due to be auctioned off, is not being sold according to reports from the Emirates. The Interwebs have been full of an Enzo abandoned in Dubai and gathering dust being impounded by police and auctioned off this week. But we didn’t run the story.
Karmann-Ghia launches contest for Brazilian design students
Tue, 02 Apr 2013Karmann-Ghia has launched a competition for Brazilian students to design a modern interpretation of its classic Volkswagen Karmann-Ghia Coupé. Students will be competing for a top prize of R$100,000 (US$49,750) with the possibility that the winning design will be developed into a prototype. The student awarded second place will earn themselves R$60,000 (US$29,800) while the third placed entry is worth R$14,884 (US$7,350).
Webinars: Defining the boundary between Technical and Concept Surfacing using Alias
Wed, 12 Oct 2011CDN hosted a new webinar entitled 'Defining the boundary between Technical and Concept Surfacing using Autodesk Alias' on October 13, 2011. The online seminar was especially relevant for design engineers (from aerospace and consumer product industries as well as automotive), for surface modelers, and for lead designers who need to understand the differences between concept surfacing and Class A surfacing. The webinar is now available to view in our archive.