Benny's Powersports
WE ARE HERE TO HELP - PLEASE CALL US IF YOU HAVE ANY QUESTIONS - (507) 726-2808.
*Follow us on Facebook at https://www.facebook.com/bennyspowersports.
You may be interested in our other eBay listings.
Part Description
1997 Yamaha VMAX 600 XTC Intake Boot Carburetor Air Box Joint 97 98 99 00
This Part came off a 1997 Yamaha VMAX 600 XTC. It may interchange with many other years and models of Yamaha Snowmobiles.
Please Check fitment BEFORE you purchase.
Assemblies where 8CR-14453-00-00 is used
*All parts are shipped exactly as they are pictured unless otherwise noted in description.
*All parts are inspected and deemed usable unless otherwise noted in description.
*Parts may require some cleaning and adjustments for proper installation.
*Engine parts should be properly cleaned and lubricated prior to assembly.
*Used Carburetors should be cleaned and tuned before installation.
*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC - (I will not be held responsible for part failure due to poor installation)
Part Fitment
You, "the buyer", are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. I will try to answer fitment questions to the best of my knowledge and resources.
Used Parts
The dictionary defines the word "used" as follows: "Not New, Previously Owned". With that being said, this is a "used" part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can't use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.
Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered "wear parts" and cannot be guaranteed unless specifically stated in the description that they are good.
PLEASE LOOK AT EVERY PICTURE CLOSELY!
Engine/Motor & Carburetor Parts
** All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s). YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).
** All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them. YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).
ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATOSTROPHIC ENGINE FAILURE – AND/OR PREMATURE ENGINE WEAR. Therefore, Benny’s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts.
Shipping
I ship Monday through Friday DAILY unless noted on my home page. I ship most of my items USPS Priority or First Class Mail 1-5 days delivery in the US. Larger items will go FedEx ground 1-5 days delivery in the US. Very Large/Oversized items such as Fenders, Hoods, Etc. will be freighted via Greyhound Express to your closest terminal or can be picked up locally. Please be advised that over-sized items are subject to space availability on the Greyhound Buses so delivery is usually 7-10 days, but can sometimes take closer to 15 business days (3 weeks). Some over-sized items are able to fit under the USPS requirements and can be shipped directly for an additional charge. Please contact us if you would like to know if your item can be shipped directly to you and get a price quote.
Shipping price stated is for the lower 48 states only. If you are in Alaska, Hawaii, Puerto Rico, Virgin Islands, or any other U.S. Territory, please contact me for shipping quote. Many small items will not need additional postage, but please ask for a quote first. If you purchase an item before receiving a shipping quote, please remember that any additional shipping charges need to be paid before your item will be shipped. Canada and International buyers are welcome but please contact me prior to bidding or buying so you understand the shipping costs. I will combine international shipping costs on multiple items.
Returns
We gladly accept returns. Please contact us before returning any item or there may be a delay in the refund of your payment. You may contact us through eBay messaging or by phone (507) 726-2808. Items must be returned within 14 days of receiving the item. All sales after 14 days are considered final. Return shipping is paid by the buyer. The buyer accepts a 20% restocking fee or the equivalent of our original shipping costs plus fees if that amount exceeds the 20%. (Please understand that even though a listing may have offered Free Shipping, we are still charged by the courier. As such our shipping cost will be deducted from the refund if they exceed the 20%)
Electrical items are NON-RETURNABLE for 3 reasons.
#1 - People using the part for testing.
#2 - People installing them on an incorrect machine.
#3 - Our inability to re-test most electrical parts after they have been returned and the machine has already been torn down.
We will not re-sell anything that we can't assure our customers was in working order when they bought it.
International Buyers
All international bidders are welcome. We ship most items via USPS Priority Mail to most countries and do not insure their ground service. With higher priced or large oversized items we may have to use UPS or FedEx due to USPS limitations. This may cause higher shipping costs. Please understand these extra costs on such items. If an item does not have a shipping price for your country, please contact us and we can get you a quote.
Import Duties, Taxes, and Charges are not included in item prices or shipping costs. These charges are the buyers responsibility. Please check with you country's customs office to determine any additional cost before bidding or buying. These charges are usually collected by the delivery shipping company or when you pick up your item. These are not additional shipping charges.
We will NOT mark values lower or mark as gifts - US and International Government policies prohibit such actions!
Feedback and 5 Star Ratings
Benny's Powersports is a small family owned and operated business. We work very hard to establish and keep a good reputation, and customer service is our #1 priority. We have no interest in short changing anyone in any way at all. With that being said, we are human and do make mistakes. If you feel you cannot leave 5 stars and good feedback for ANY reason, please give us the opportunity to make it up to you. Call us at (507) 726-2808 or email us with your issue. You are our VALUED customer and we will not take you for granted.
1997 yamaha vmax 600 xtc intake manifold carburetor carb boot 97 98 99 00 01
1997 yamaha vmax 600 xtc intake boot carburetor air box joint 97 98 99 00
Vintage yamaha sl292 gp 246 292 et250 oem intake manifold gasket 881-13556-09-00
Vintage walbro wd1-1 carb carburator 41mm - nice!
Vintage arctic cat panther cheetah lynx walbro wf1b carburetor 0170-042
Lot of 2001 polaris pro x 440 carburetor components 34mm round slide