Find or Sell any Parts for Your Vehicle in USA

2" X 50' Black Fiberglass Wrap Header Exhaust Pipe Tape High Heat Thermo Thermal on 2040-parts.com

US $26.99
Location:

Aurora, Illinois, United States

Aurora, Illinois, United States
Condition:New Manufacturer Part Number:1B250/6689 Brand:Unbranded UPC:788536626689

BEST OFFER FOR 2 OR MORE ONLY PLEASE

50 FOOT FIBERGLASS WRAP ROLL
 
2" WIDE BLACK
 
MOST COMMON SIZED ROLL USED FOR SMALL-MEDIUM JOBS. MEASURE YOUR PIPES AND SEE YIELD CHART BELOW, TO REDUCE WASTE AND PREVENT SHORTAGES.
  
WRAP SPECS:
  •  MATERIAL: PURE VIRGIN GLASS FIBER
  • THICKNESS: 1/16 INCH
  • WIDTH: 2 INCH
  • TEMP: 1030°F CONTINUOUS, 2060°F INTERMITTENT
  • COLOR: CUSTOM DYED DARK BLACK
  • PREMIUM WEAVE STAYS TOGETHER

 

A COUPLE REASONS TO CONSIDER THIS UPGRADE:

THIS WRAP WILL HELP PROTECT YOUR WALLET BY INCREASING EFFICIENCY OF THE EVERYDAY VEHICLE.

  • EXTENDS ENGINE LIFE
  • INSTANT FUEL SAVINGS, HIGHER MPG
  • PROVEN TO REDUCE UNDER HOOD HEAT BY UP TO 70%
  • EASILY INSTALLED BY THE NOVICE AND PRO ALIKE
  • WILL REDUCE TURBO LAG
  • WILL INCREASE HORSEPOWER
  • PROTECTS UNDER HOOD WIRING & ELECTRONICS
  • KEEPS THE ENGINE COMPARTMENT COOLER, PROTECTING PLASTIC PARTS, HOSES, WIRING ETC FROM DRY ROT AND EARLY BREAK DOWN.
  • USE AS A TURBO WRAP INSTEAD OF A 400$ BLANKET
  • WRAP HOT HOSES SUPERCHARGER HARDWARE AND MORE 

 ALSO A GREAT WAY TO HIDE BLUING, WELD LINES OR JUST PLAIN UGLY PIPES ON OLDER OR CUSTOM MADE PIPES

 

  • MOTORCYCLE
  • CHOPPER
  • NASCAR
  • INDYCAR
  • STREET ROD
  • HOT ROD
  • MUSCLE CAR
  • VINTAGE CAR
  • ATV'S
  • GO CART
  • MOM'S MINI VAN
  • TRACTOR AND LAWNMOWER
  • AVIATION & MARINE
  • COMMERCIAL TRUCK
  • FLEET VEHICLES
  • FARM EQUIPMENT
  • ANYTHING WITH AN EXHAUST!

 

SO HOW MUCH FIBERGLASS WRAP DO I NEED FOR MY PROJECT? / LOOK BELOW, OR SEND ME A PICTURE.

YIELD CHART:

CHART = WRAP NEEDED PER 1 LINEAR FOOT OF PIPE YOU PLAN TO WRAP.

ALWAYS ADD 10% TO TOTAL JOB AND ANOTHER 8-14" PER BEND APROX. DEPENDING ON THE ANGLE

PIPE

DIAMETER

INCH/mm

1” WIDE WRAP

 PER LINEAR FOOT

Inches”/feet’

2” WIDE WRAP

 PER LINEAR FOOT

Inches”/feet’

1-3/8”/35mm

70”/5’

30”/2.5’

1/1/2”/38mm

76”/6.33’

33”/2.75’

1-5/8”/41mm

82”/6.8’

35”/2.9’

1-3/4”/45mm

88”/7.33’

38”/3.16’

1-7/8”/48mm

95”/7.9’

41”/3.5’

2”/50mm

101”/8.4’

44”/3.66'

2-1/8”/53mm

108”/9’

46”/3.83’

2-1/4”/57mm

113”/9.4’

49”/4’

2-1/2”/64

125”/10.5’

52”/4.33’

3”/76mm

136”/11.33’

60”/5’

EXAMPLE: IF YOU HAVE 2" PIPES THAT ARE 10' LONG TOTAL, AND YOU WANT TO USE A 2" WIDE WRAP.....

LOOK AT THE CHART, FIND YOUR PIPE SIZE ON THE LEFT (IN THIS CASE 2" OR 50MM {SAME THING} ) THEN FOLLOW THE CHART TO THE RIGHT UNDER "2" WIDE WRAP" YOU WILL SEE YOU NEED 44 INCHES OR 3.83 FEET PER LINEAR FOOT OF PIPE

TAKE 44" or 3.66' AND MULTIPLY BY 10FT = 440 INCHES/36.6 FEET THEN ADD 10% ..... SO YOU NEED A 50 FT ROLL. DONT FORGET TO ADD FOR BENDS


INSTALL TIPS:

  1. WEAR GLOVES AND A LONG SLEEVE SHIRT TO PREVENT ITCHING/AND IRRITATION.
  2. WRAP WILL SMOKE LIGHTLY AFTER INITIAL INSTALLATION (JUST FEW MINUTES).
  3. STARTING AT THE FLANGE END LEAVE ABOUT ¼"- ½" FOR HARDWARE.
  4. EACH WRAP SHOULD OVERLAP THE PREVIOUS LAYER BY APPROXIMATELY ¼"- ½"
  5. TURNS AND CURVES WILL HAVE BIT MORE OF AN OVERLAP.
  6. TRY TO KEEP THE WRAP AS SNUG AS POSSIBLE AS YOU GO AND CONTINUE TO THE END OF THE PIPE.
  7. USE A STAINLESS STEEL TIE AT BOTH ENDS TO HOLD WRAP IN PLACE. ( I USE 2 0R 3 AT EACH END FOR LOOKS, EXTRA SECURITY & PEACE OF MIND)
  8. YOUR DONE.

UPON PURCHASE BUYERS AGREES TO ASSUME ALL RESPONSIBILITIES WHEN INSTALLING OUR PRODUCTS.

DONT FORGET TIES 

CHECK OUT OUR OTHER FIBERGLASS, LAVA AND CERAMIC WRAP COMBINATIONS, KITS AND ROLLS. WE ALSO HAVE STAINLESS TIES IN 3/16" (STANDARD) AND 5/16 (MONSTER) IN LENGTHS FROM 4"- 54"! AND PACKS FROM 5-100 

WE WILL SHIP THIS FAST & FREE~! 

CLICK HERE TO CHECK OUT OUR STORE FOR MORE GREAT DEALS! 

BEST OFFER FOR 2 OR MORE PLEASE

THE BEST PRICES ON EBAY ARE RIGHT HERE!
LESS THAN RETAIL SALES.
SAVE YOUR TIME, MONEY, GAS, AND SANITY BY SHOPPING FROM THE COMFORT OF HOME.
HAVE IT DELIVERED DIRECTLY TO YOUR FRONT DOOR.
YOU CAN ALSO SAVE ON COMBINED PURCHASES TOO!
YOU WILL FIND THE DETAILS OF LISTED ITEMS ARE EASY TO READ. JUST SIMPLE GET TO THE POINT DESCRIPTIONS!
WITHOUT LINES OF POLICIES AND RESTRICTIONS.
WE STRIVE TO REACH THE FOLLOWING GOALS, QUALITY PRODUCTS, FAST SHIPPING, INTEGRITY, AND SERVICE AFTER THE SALE.
THERE WILL BE NO TRICKS OR "SMALL PRINT" HERE!
 
 
 
 
INTERNATIONAL CUSTOMERS:
YOUR SHIPPING COST INCLUDES POST AND, OUR TIME FOR DOCUMENTATION, RESTRICTED GOODS CHECKS AND OTHER PROCEDURES UNIQUE TO EACH COUNTRY.
BEST OFFERS:
WE TRY OUR BEST TO WORK WITH EVERYONE. WE RECEIVE 20-100 OFFERS EACH DAY. PLEASE BE PATIENT WITH US. WE REVIEW ALL OF THEM... RIDICULOUS OFFERS CANNOT BE RESPONDED TO. IF WE ARE LOW ON STOCK ON A CERTAIN ITEM WE MAY DECLINE YOUR OFFER.
FEEDBACK:
PLEASE CONTACT US WITH ANY ISSUES PRIOR TO LEAVING FEEDBACK OTHER THAN A POSITIVE WITH ALL 5 STARS. WE TRY VERY HARD TO MAINTAIN A HIGH SELLER RATING AND WANT YOU TO BE HAPPY WITH YOUR PURCHASE EVERY TIME!
PLEASE FEEL FREE TO CONTACT US WITH ANY QUESTIONS.
 
 
!!THANKS FOR STOPPING IN, COME BY AGAIN!!

Header Kits for Sale

New 2013 Range Rover heading for a Geneva 2012 debut

Thu, 16 Feb 2012

The new Range Rover looks set for a Geneva debut We’re hearing that Land Rover are planning to debut the 2013 Range Rover at the Geneva Motor Show in March. We’ve had plenty of spy shots of the new Range Rover in the last year as Land Rover work hard to sort out the vital replacement for the now 10 year old Range Rover, and we’ve even had spy video of the new Land Rover halo car at the Nurburgring. Now we’re hearing that Land Rover are planning to debut the new Range Rover at next month’s Geneva Motor Show.

Vencer launch sports car design contest

Fri, 01 Jun 2012

Vencer has launched a new interactive design contest that offers cash prizes and the unique opportunity to see the winning design developed into the automaker's next model. The Dutch supercar maker, which has produced just one model to date, the Vencer Sarthe, decided to start a worldwide community-driven development of a new car during the design process for the Sarthe, which formed the basis for this contest. On 13 December 2013 at 13.00 CET, Vencer will establish the participants with the most ‘likes' amongst those who met the conditions.

Happiness is a Jaguar XJ6 Coupé, says Michael J. Scott

Thu, 01 Jul 2010

My first Jaguar experience was with the purchase of an XJ6 Coupe which I bought because I thought it was very elegant.  The 4.2 straight six never failed to impress in the way the car just disappeared over the horizon in plush silence (apart from some wind noise from the door seals) and I loved the drama of opening two petrol caps and pumping in fuel from both sides of the car. After long fast drives to southern Germany I always arrived as fresh as when I started out. The car attracted admiring interest from everyone including little old ladies!