2 Boat Fenders Bumper 27 X 8.5 Vinyl Black Docking on 2040-parts.com
Davison, Michigan, US
This is a set of 2 Boater Sports Boat Fenders 27'' x 8.5'' . Good utility fender for trailered boats and boats in protected moorings.
When ordering, please enter the number of SETS (of two fenders) that you wish to receive in the quantity box. (Example: a quantity of 1 (set) you will receive 2 fenders. A quantity of 2 (sets) you will receive 4 fenders.
Features:
- Black
- Size - 27'' x 8.5''
- Quality Vinyl
- Super Soft Design
- Non- Abrasive
- Can be Tied to Cleats or Rails
- Reinforced Rope Holes on both ends
- Can be hung Vertical or Horizontal
- Pre- Inflated and Ready to Use
- Inflation port to adjust pressure up or down
- Ribbed on all sides for Strength and Durability
- UV Resistant
If you have any questions please contact us.
Frequently Asked Questions: Boat Fenders<>
What Size Fender Do I Need? Many factors should be considered when determining what size fender to use. Following is the recommended size for fenders by Boat Length:
· 4’’ x 16’’ Boats up to 10 foot
· 5’’ x 20’’ Boats up to 20 foot
· 6’’ x 22’’ Boats up to 25 foot
· 8’’ x 27’’ Boats up to 30 foot
If you <>moor frequently in High winds, Rough water, and Unprotected Moorings, or if you have a large High Profile boat you may want to consider using one size larger.
How are these fenders constructed? Most of the fenders we carry are single wall construction. If a fender is constructed differently, it will be stated in the listing
Do these fenders come inflated? Yes, all of the fenders we sell are shipped inflated. You may wish to adjust the final pressure when you receive them
Can the Pressure be Adjusted? Yes, all of the fenders we sell have inflation ports on them. Please see each item description for specific instructions on inflation
Are these Fenders Guaranteed? When used under recommended conditions the Polyform Fenders are covered by the manufacturer under warranty to be free from defects for the life of the product. All Boater Sports Fenders are covered by a 30 day satisfaction guarantee through us.
.
Are these Fenders Made In America? All Polyform Fenders are Made in the USA. All Boater Sports Fenders are imported.
Will the Fenders Scuff my Boat? No, when used properly on a boat with Gel Coat in good condition the fenders will not leave any marks
Why is Shipping so Expensive? We only charge actual UPS shipping cost and do not profit from shipping. Unfortunately, due to the size of some Fenders shipping can be expensive. We always combine shipping on items when possible.
Important Note: These answers should be used as general guidelines only and should not be substituted for Professional Advice. We have no way of foreseeing every condition these Fenders may be used in. If you are not confident in which Fenders you require, we recommend contacting your boat’s manufacturer or local authorities to get information on any specific conditions unique to your application. All item images and item descriptions on this listing are property of Underwoods Auto & Marine LLC and are not to be used, copied, or otherwise reproduced without written permission.
Powered by ProStores
Safety Gear & Devices for Sale
2 boat fenders bumpers 6.5" x 23" red vinyl docking new(US $32.95)
2 boat fenders bumpers 8.5" x 27" vinyl blue docking(US $54.95)
Zippered rigging sleave(US $25.00)
Kent life jacket pfd vest storage bag holds 6(US $13.95)
Jetski seadoo waverunner jet boat mercury marine whistle with clip all colors (US $4.95)
Jetski seadoo waverunner jet boat mercury marine whistle with cord all colors (US $5.95)
Goodbye Gemballa UK – Hello Merdad & the Porsche Cayenne 2dr Coupe
Thu, 03 Jun 2010The 2 door Porsche Cayenne by UK company Merdad What’s a Merdad, you may well ask? Well, a Merdad is not a what, it’s a he. He ran the Gemballa franchise in the UK – rather successfully – but as Uwe Gemballa has gone on an extended African holiday and his eponymous company is in liquidation Merdad had to get a shake on to create his company’s future.
MINI Speedster back on the cards
Tue, 07 Apr 2009Mini Speedster from 2001 - looks set to form the basis of a new MINI Speedster Based on the MINI platform, the Speedster version was talked about as long ago as 2001, but never made it to production on the first MINI platform. But perhaps having now covered just about every variant they can think of, BMW has decided that now is the time to revive the car and get it in to production. Small Roadsters, in the vein of the old British open-topped 2 seater ( and its modern ‘Homage’ version – the MX-5) will, I’m sure, see something of a renaissance in the next few years as people start to turn away from big, profligate cars, but still seek some fun motoring.
Ferrari FF: Lust on a mountain top
Fri, 11 Mar 2011Ferrari FF hitches a helicopter ride from the Italian Air Force Ferrari are taking no chances on the Ferrari FF disappearing from view in the mass of launches and endless four wheeled objects of desire doing the rounds with the Geneva Motor Show still in full swing, so we’re getting lots of snippets of newsy stuff cropping up. Today’s little snippet of newsworthy publicity for the Ferrari FF is a bit of video of the FF being airlifted to the top of a mountain by helicopter. Why, you may ask?