Find or Sell any Parts for Your Vehicle in USA

2000 Bmw 528i Rear Rh Door Wiring Harness on 2040-parts.com

US $55.00
Location:

56310, US

56310, US
Returns Accepted:Returns Accepted Item must be returned within:30 Days Return policy details:Notice, it is completely the buyers responsibility to make sure an item will work for their application prior to purchase. All returns are for store credit only and are subject to the following conditions: 1.) The part(s) bears authentic Slidegood, Inc. markings which appear on all our merchandise. 2.) The part(s) have not been used for non-OEM application including but not limited to; off road use, racing use, swaps, or anything that is different from the original manufacturers intended use. 3.) The part(s) have not been altered, modified, diassembled, overheated or damaged. 4.) The customer has their original invoice. 5.) The part has not been sourced or obtained from a third party. 6.) Absolutely NO returns after 30 days of receiving the item. 7.) Non-defective parts are subject to a 25% restocking fee. Buyer is also responsible for shipping both ways. Refund will be given as:Money Back Return shipping will be paid by:Buyer Restocking Fee:No Make:BMW Model:528i Year:2000 Part Type:Door Wiring Mileage:154110 PartsBeast ID:21200 Warranty:Yes Name:2000 BMW 528i Rear RH Door Wiring Harness VIN:WBADM6342YGU22553

2000 BMW 528i Rear RH Door Wiring Harness

Additional Images

Details

WBADM6342YGU22553 2000
BMW 528i
2/2000
154110 Automatic Transmission
2.8L M52 RWD
Sedan Used
TITAN SILVER METALLIC Black
354 Leather
Door Wiring
21200

About Us

Slidegood offers quality new and used auto parts for imports. Slidegood, Inc. is a licensed automotive recycler of imports providing genuine OEM parts for; Acura RSX, Acura Integra, BMW M3, BMW M5, Nissan 350z, Nissan 240sx, Honda S2000, Honda Del Sol, Honda Prelude, Honda Civic, Honda CRX, Mazda RX7, Subaru WRX, Subaru BRZ, Lexus SC300/400, AND MORE! We start by removing every part from the vehicle when it arrives at our facility. Parts are then stored in our indoor warehouse. We have hard to find, interior, exterior, engine, wiring, transmission, suspension...etc, even full frames and quarter panels. Everything you see on our website has been inspected and is ready to ship unless otherwise stated. Every part features photos of the exact part you are buying and include a 60 day warranty, so shop with confidence. See the FAQ page for full warranty details. We are warehoused in Central Minnesota and ship worldwide. All parts are eligible for same day shipping unless otherwise noted. Larger items that must go LTL freight such as hatches, quarter panels, and engines may require additional time for packaging.

Return Policy

Notice, it is completely the buyers responsibility to make sure an item will work for their application prior to purchase. All returns are for store credit only and are subject to the following conditions: 1.) The part(s) bears authentic Slidegood, Inc. markings which appear on all our merchandise. 2.) The part(s) have not been used for non-OEM application including but not limited to; off road use, racing use, swaps, or anything that is different from the original manufacturers intended use. 3.) The part(s) have not been altered, modified, diassembled, overheated or damaged. 4.) The customer has their original invoice. 5.) The part has not been sourced or obtained from a third party. 6.) Absolutely NO returns after 30 days of receiving the item. 7.) Non-defective parts are subject to a 25% restocking fee. Buyer is also responsible for shipping both ways.

Warranty Information

Slidegood, Inc. warrants recycled parts we sell for 60 days from the original purchase date. Some of our parts may come with accessories attached. These parts are left on the main part to aid in the installation process, but are not covered in your warranty. IMPORTANT ENGINE WARRANTY INFORMATION Void if conditions are not met. Our engines come with a 60 day parts only warranty unless otherwise stated. This is a part replacement warranty only. Installation and labor costs are not covered, so if the part fails, we will send a replacement part provided all warranty requirements are met (see below for warranty requirements). Engines are sold as a long block only and do not include any accessories or the transmission. Meaning-all engines are sold WITH OUT the Starter, Alternator, Power Steering Pump, Turbo, Supercharger, AC Compressor, Plastic Engine Covers , Wiring harness, Coil Pack, Distributor, Throttle Body, and Main Computer. All other components included are considered convenience items and are not covered by our warranty. Most engines will include Intake Manifolds, Fuel Injectors, Fuel Rails, and Sensors. These items are NOT Guaranteed to be included nor are they covered under our warranty. You should expect to use your existing Intake Manifold(s), Exhaust Manifold(s), Sensors, and Wiring Harness to eliminate complications when installing the engine. Engine Warranty Requirements: -Replace engine oil to manufacturer’s suggested level -Replace oil filter -Flush oil coolers -Replace valve cover gasket(s) -Replace oil pan gasket and main seal -Replace Timing Belt and idler pulley(s) -Ensure motor is timed correctly before installation of motor -Replace Timing Chain if mileage meets manufacture specifications -Replace thermostat and gasket -Flush and inspect cooling system (including radiator) -Install new spark plugs -Install new belts and hoses -Other installation procedures may apply. Contact the vehicle manufacturer for specific installation instructions

BMW offers M Performance Parts for 3- and 5-series

Fri, 04 May 2012

BMW opened up its M Performance Parts catalog to the new 3- and 5-series, the company said on Friday. The German automaker will offer chassis, brakes, aero upgrades and exhaust improvements for the 2012 3-series and the 2011-12 5-series. BMW revealed the line for its diesel cars in Europe in January, but those cars won't be coming here.

Alcraft and RCA announce design competition winner

Thu, 30 Jan 2014

Alcraft Motor Company has announced the winner of a design competition featuring students from the Royal College of Art (RCA) Vehicle Design program. The contest, which concludes a joint project exploring British design values and personalized vehicle design, challenged students to develop a personalized design package for Range Rover models. Winning student Jed Sheehan collected his award for his treatment of the flagship Range Rover, which Alcraft has transformed into a design study.

Next generation BMW 6 Series Preview

Thu, 26 Feb 2009

Rendering of the next generation (2010) BMW 6 Series - a sleeker and lower car than the current generation Not due until late 2010, the next generation 6 Series looks set to be a lower, sleeker car than the current model. In fact, it looks like BMW may have found a use for a lot of the work they did on the shelved BMW CS project, which was to be BMW’s A7/CLS challenger until the project was shelved a few months ago. Current opinion is that the next generation Convertible will stick with the rag-top, but recent spy shots seem to show a pretty bulky roof camouflage, leading to speculation that BMW may go the folding tin-top roof with the next generation 6-series.