Find or Sell any Parts for Your Vehicle in USA

2000 Bmw 528i Rh Cabin Air Intake Tube on 2040-parts.com

US $18.00
Location:

56310, US

56310, US
Returns Accepted:Returns Accepted Item must be returned within:30 Days Return policy details:Notice, it is completely the buyers responsibility to make sure an item will work for their application prior to purchase. All returns are for store credit only and are subject to the following conditions: 1.) The part(s) bears authentic Slidegood, Inc. markings which appear on all our merchandise. 2.) The part(s) have not been used for non-OEM application including but not limited to; off road use, racing use, swaps, or anything that is different from the original manufacturers intended use. 3.) The part(s) have not been altered, modified, diassembled, overheated or damaged. 4.) The customer has their original invoice. 5.) The part has not been sourced or obtained from a third party. 6.) Absolutely NO returns after 30 days of receiving the item. 7.) Non-defective parts are subject to a 25% restocking fee. Buyer is also responsible for shipping both ways. Refund will be given as:Money Back Return shipping will be paid by:Buyer Restocking Fee:No Make:BMW Model:528i Year:2000 Part Type:Air Intake Tube Mileage:154110 PartsBeast ID:21185 Warranty:Yes Name:2000 BMW 528i RH Cabin Air Intake Tube VIN:WBADM6342YGU22553

2000 BMW 528i RH Cabin Air Intake Tube

Additional Images

Details

WBADM6342YGU22553 2000
BMW 528i
2/2000
154110 Automatic Transmission
2.8L M52 RWD
Sedan Used
TITAN SILVER METALLIC Black
354 Leather
Air Intake Tube
21185

About Us

Slidegood offers quality new and used auto parts for imports. Slidegood, Inc. is a licensed automotive recycler of imports providing genuine OEM parts for; Acura RSX, Acura Integra, BMW M3, BMW M5, Nissan 350z, Nissan 240sx, Honda S2000, Honda Del Sol, Honda Prelude, Honda Civic, Honda CRX, Mazda RX7, Subaru WRX, Subaru BRZ, Lexus SC300/400, AND MORE! We start by removing every part from the vehicle when it arrives at our facility. Parts are then stored in our indoor warehouse. We have hard to find, interior, exterior, engine, wiring, transmission, suspension...etc, even full frames and quarter panels. Everything you see on our website has been inspected and is ready to ship unless otherwise stated. Every part features photos of the exact part you are buying and include a 60 day warranty, so shop with confidence. See the FAQ page for full warranty details. We are warehoused in Central Minnesota and ship worldwide. All parts are eligible for same day shipping unless otherwise noted. Larger items that must go LTL freight such as hatches, quarter panels, and engines may require additional time for packaging.

Return Policy

Notice, it is completely the buyers responsibility to make sure an item will work for their application prior to purchase. All returns are for store credit only and are subject to the following conditions: 1.) The part(s) bears authentic Slidegood, Inc. markings which appear on all our merchandise. 2.) The part(s) have not been used for non-OEM application including but not limited to; off road use, racing use, swaps, or anything that is different from the original manufacturers intended use. 3.) The part(s) have not been altered, modified, diassembled, overheated or damaged. 4.) The customer has their original invoice. 5.) The part has not been sourced or obtained from a third party. 6.) Absolutely NO returns after 30 days of receiving the item. 7.) Non-defective parts are subject to a 25% restocking fee. Buyer is also responsible for shipping both ways.

Warranty Information

Slidegood, Inc. warrants recycled parts we sell for 60 days from the original purchase date. Some of our parts may come with accessories attached. These parts are left on the main part to aid in the installation process, but are not covered in your warranty. IMPORTANT ENGINE WARRANTY INFORMATION Void if conditions are not met. Our engines come with a 60 day parts only warranty unless otherwise stated. This is a part replacement warranty only. Installation and labor costs are not covered, so if the part fails, we will send a replacement part provided all warranty requirements are met (see below for warranty requirements). Engines are sold as a long block only and do not include any accessories or the transmission. Meaning-all engines are sold WITH OUT the Starter, Alternator, Power Steering Pump, Turbo, Supercharger, AC Compressor, Plastic Engine Covers , Wiring harness, Coil Pack, Distributor, Throttle Body, and Main Computer. All other components included are considered convenience items and are not covered by our warranty. Most engines will include Intake Manifolds, Fuel Injectors, Fuel Rails, and Sensors. These items are NOT Guaranteed to be included nor are they covered under our warranty. You should expect to use your existing Intake Manifold(s), Exhaust Manifold(s), Sensors, and Wiring Harness to eliminate complications when installing the engine. Engine Warranty Requirements: -Replace engine oil to manufacturer’s suggested level -Replace oil filter -Flush oil coolers -Replace valve cover gasket(s) -Replace oil pan gasket and main seal -Replace Timing Belt and idler pulley(s) -Ensure motor is timed correctly before installation of motor -Replace Timing Chain if mileage meets manufacture specifications -Replace thermostat and gasket -Flush and inspect cooling system (including radiator) -Install new spark plugs -Install new belts and hoses -Other installation procedures may apply. Contact the vehicle manufacturer for specific installation instructions

Audi S1 & S1 Sportback revealed with 228bhp (+video)

Wed, 12 Feb 2014

The Audi S1 has been revealed (S1 Sportback pictured) Audi has been threatening a quattro driven A 1 as a full production model ever since the limited edition A1 Quattro arrived two years ago with 252bhp and a very big price tag. An now we get it. The new Audi S1 has been revealed ahead of a debut at the Geneva Motor Show next month, and it gets quattro 4WD just like the A1 Quattro, even if it has to make do with less power – the S1 delivers 228bhp and 237lb/ft of torque from its 2.0 litre turbo – that’s less bhp but more torque than the A1 quattro managed.

Carroll held hostage by Tesla Model S

Tue, 04 Dec 2012

Autoweek's senior online editor Rory Carroll was stranded Tuesday morning by a charger stuck in a Tesla Model S. It won't release from the car, and because of that, the car won't run. He took to Twitter this morning for ideas, but has yet to receive a good one.

Video: Rolls-Royce Wraith design process revealed

Mon, 18 Mar 2013

Rolls-Royce has released a video exploring the design process behind its Wraith fastback, revealed earlier this month at the Geneva motor show. The video is one of a series that look at the Wraith's development process, focusing on the design and performance of the Wraith. Key figures behind its development such director of design Giles Taylor and head of interior design Ian Sheppard feature, explaining how the Wraith evolved the way it did and how the design teams made their decisions.