Find or Sell any Parts for Your Vehicle in USA

2000 Ski Doo Summit 600 Drive Shaft W Sprockets on 2040-parts.com

US $34.99
Location:

Lake Crystal, Minnesota, United States

Lake Crystal, Minnesota, United States
Used Item - May Show Scuffs/Scratches from Normal Wear - Please look at ALL pictures
Brand:Ski-Doo UPC:Does Not Apply

   Benny's Powersports  

WE ARE HERE TO HELP - PLEASE CALL US IF YOU HAVE ANY QUESTIONS - (507) 726-2808. 

*Follow us on Facebook at https://www.facebook.com/bennyspowersports.

You may be interested in our other eBay listings.

Part Description

2000 Ski Doo Summit 600 Drive Shaft w Sprockets

This item came off a 2000 Ski Doo Summit 600. It may fit many other years and models of Ski Doo Snowmobiles.

Please Check Fitment BEFORE you purchase.  If you need help figuring out what part # you need for your vehicle, please contact us. 

*All parts are shipped exactly as they are pictured unless otherwise noted in description.

*All parts are inspected and deemed usable unless otherwise noted in description.

*Parts may require some cleaning and adjustments for proper installation.

*Engine parts should be properly cleaned and lubricated prior to assembly. 

*Used Carburetors should be cleaned and tuned before installation. 

*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC - (I will not be held responsible for part failure due to poor installation)

Part Fitment

You, "the buyer", are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. I will try to answer fitment questions to the best of my knowledge and resources.

Used Parts

The dictionary defines the word "used" as follows: "Not New, Previously Owned". With that being said, this is a "used" part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can't use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.  

Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered "wear parts" and cannot be guaranteed unless specifically stated in the description that they are good.

PLEASE LOOK AT EVERY PICTURE CLOSELY!

Engine/Motor & Carburetor Parts

** All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s). YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly  cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

** All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them. YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATOSTROPHIC ENGINE FAILURE – AND/OR PREMATURE ENGINE WEAR. Therefore, Benny’s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts.
 

Shipping

I ship Monday through Friday DAILY unless noted on my home page. I ship most of my items USPS Priority or First Class Mail 1-5 days delivery in the US. Larger items will go FedEx ground 1-5 days delivery in the US. Very Large/Oversized items such as Fenders, Hoods, Etc. will be freighted via Greyhound Express to your closest terminal or can be picked up locally. Please be advised that over-sized items are subject to space availability on the Greyhound Buses so delivery is usually 7-10 days, but can sometimes take closer to 15 business days (3 weeks). Some over-sized items are able to fit under the USPS requirements and can be shipped directly for an additional charge. Please contact us if you would like to know if your item can be shipped directly to you and get a price quote. 

Shipping price stated is for the lower 48 states only. If you are in Alaska, Hawaii, Puerto Rico, Virgin Islands, or any other U.S. Territory, please contact me for shipping quote. Many small items will not need additional postage, but please ask for a quote first. If you purchase an item before receiving a shipping quote, please remember that any additional shipping charges need to be paid before your item will be shipped. Canada and International buyers are welcome but please contact me prior to bidding or buying so you understand the shipping costs. I will combine international shipping costs on multiple items.

Returns

We gladly accept returns. Please contact us before returning any item or there may be a delay in the refund of your payment.  You may contact us through eBay messaging or by phone (507) 726-2808. Items must be returned within 14 days of receiving the item. All sales after 14 days are considered final. Return shipping is paid by the buyer. The buyer accepts a 20% restocking fee or the equivalent of our original shipping costs plus fees if that amount exceeds the 20%.  (Please understand that even though a listing may have offered Free Shipping, we are still charged by the courier. As such our shipping cost will be deducted from the refund if they exceed the 20%)


Electrical items are NON-RETURNABLE for 3 reasons.
#1 - People using the part for testing.
#2 - People installing them on an incorrect machine.
#3 - Our inability to re-test most electrical parts after they have been returned and the machine has already been torn down.
We will not re-sell anything that we can't assure our customers was in working order when they bought it.
  

International Buyers

All international bidders are welcome.  We ship most items via USPS Priority Mail to most countries and do not insure their ground service.  With higher priced or large oversized items we may have to use UPS or FedEx due to USPS limitations. This may cause higher shipping costs.  Please understand these extra costs on such items.  If an item does not have a shipping price for your country, please contact us and we can get you a quote.

Import Duties, Taxes, and Charges are not included in item prices or shipping costs.  These charges are the buyers responsibility.  Please check with you country's customs office to determine any additional cost before bidding or buying.  These charges are usually collected by the delivery shipping company or when you pick up your item.  These are not additional shipping charges.

We will NOT mark values lower or mark as gifts - US and International Government policies prohibit such actions!

Feedback and 5 Star Ratings

Benny's Powersports is a small family owned and operated business.  We work very hard to establish and keep a good reputation, and customer service is our #1 priority. We have no interest in short changing anyone in any way at all. With that being said, we are human and do make mistakes. If you feel you cannot leave 5 stars and good feedback for ANY reason, please give us the opportunity to make it up to you. Call us at (507) 726-2808 or email us with your issue. You are our VALUED customer and we will not take you for granted.


 

Clutch & Drive Belts for Sale

McLaren 12C Can-Am & Historic McLaren Can-Ams at 2013 Goodwood FoS

Tue, 30 Apr 2013

It seems it was, because by November McLaren revealed the 12C Can Am was going in to limited production – just 30 units at £375,000 each – for deep-pocketed Americans to go track day racing with a 12C that weighs in at 1200kg, gets a few extra horses and 30 per cent more downforce compared to the road going 12C. So with a new track car and a 50th anniversary to celebrate in 2013, McLaren has decided it’s a good idea to take the 12C Can-Am off to play on the Goodwood hillcimb this summer at the 2013 Festival of Speed and, for added interest, take along a selection of models from their heritage collection – the ultimate McLaren racers of the 1960s and 70s – for our delight. McLaren has also given us a teaser video of the M8D Can-Am Racer (below) as a taster of what visitors to this year’s FoS can look forward too, yet another reason to get yourself down to Sussex in July.

Chrysler reportedly set to expand Toledo assembly plant

Thu, 11 Aug 2011

The Chrysler Group is planning to expand its Toledo, Ohio, assembly complex, adding a second shift and more than 1,100 jobs to the operation that currently builds the Jeep Liberty and Dodge Nitro SUVs, the Toledo Blade newspaper reported Thursday. The $365 million investment could be the first of several major expansions to Chrysler's Toledo operations, which also include production of the Jeep Wrangler at the nearby Toledo North Plant, the newspaper reported. The automaker disclosed the plans in documents filed in a city tax application that will be discussed by local officials at a meeting Thursday night, the report said.

NHTSA investigates fuel-tank problem with 2004 Chevrolet Corvettes

Tue, 18 May 2010

The National Highway Traffic Safety Administration has opened an investigation into a potentially leaky fuel-tank problem with the 2004 Chevrolet Corvette. The investigation was launched on May 12 and covers an estimated 33,000 Corvettes. There have been 30 reports from consumers alleging either leaking liquid or fuel vapor coming from a tank, NHTSA said.