Find or Sell any Parts for Your Vehicle in USA

2000 Ski Doo Summit 700 Center Steering Rack Assembly Tie Rod Pivot on 2040-parts.com

US $44.99
Location:

Lake Crystal, Minnesota, United States

Lake Crystal, Minnesota, United States
2000 Ski Doo Summit 700 Center Steering Rack Assembly Tie Rod Pivot, US $44.99, image 1
Used Item - May Show Scuffs/Scratches from Normal Wear - Tear on back see picture #2 - Please look at ALL pictures
Brand:Ski-Doo UPC:Does Not Apply

   Benny's Powersports  

WE ARE HERE TO HELP - PLEASE CALL US IF YOU HAVE ANY QUESTIONS - (507) 726-2808. 

*Follow us on Facebook at https://www.facebook.com/bennyspowersports.

You may be interested in our other eBay listings.

Part Description

2000 Ski Doo Summit 700 Center Steering Rack Assembly Tie Rod Pivot

This item came off a 2000 Ski Doo Summit 700. It may fit many other years and models of Ski Doo Snowmobiles.

Please Check Fitment BEFORE you purchase.  If you need help figuring out what part # you need for your vehicle, please contact us. 

*All parts are shipped exactly as they are pictured unless otherwise noted in description.

*All parts are inspected and deemed usable unless otherwise noted in description.

*Parts may require some cleaning and adjustments for proper installation.

*Engine parts should be properly cleaned and lubricated prior to assembly. 

*Used Carburetors should be cleaned and tuned before installation. 

*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC - (I will not be held responsible for part failure due to poor installation)

Part Fitment

You, "the buyer", are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. I will try to answer fitment questions to the best of my knowledge and resources.

Used Parts

The dictionary defines the word "used" as follows: "Not New, Previously Owned". With that being said, this is a "used" part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can't use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.  

Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered "wear parts" and cannot be guaranteed unless specifically stated in the description that they are good.

PLEASE LOOK AT EVERY PICTURE CLOSELY!

Engine/Motor & Carburetor Parts

** All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s). YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly  cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

** All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them. YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATOSTROPHIC ENGINE FAILURE – AND/OR PREMATURE ENGINE WEAR. Therefore, Benny’s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts.
 

Shipping

I ship Monday through Friday DAILY unless noted on my home page. I ship most of my items USPS Priority or First Class Mail 1-5 days delivery in the US. Larger items will go FedEx ground 1-5 days delivery in the US. Very Large/Oversized items such as Fenders, Hoods, Etc. will be freighted via Greyhound Express to your closest terminal or can be picked up locally. Please be advised that over-sized items are subject to space availability on the Greyhound Buses so delivery is usually 7-10 days, but can sometimes take closer to 15 business days (3 weeks). Some over-sized items are able to fit under the USPS requirements and can be shipped directly for an additional charge. Please contact us if you would like to know if your item can be shipped directly to you and get a price quote. 

Shipping price stated is for the lower 48 states only. If you are in Alaska, Hawaii, Puerto Rico, Virgin Islands, or any other U.S. Territory, please contact me for shipping quote. Many small items will not need additional postage, but please ask for a quote first. If you purchase an item before receiving a shipping quote, please remember that any additional shipping charges need to be paid before your item will be shipped. Canada and International buyers are welcome but please contact me prior to bidding or buying so you understand the shipping costs. I will combine international shipping costs on multiple items.

Returns

We gladly accept returns. Please contact us before returning any item or there may be a delay in the refund of your payment.  You may contact us through eBay messaging or by phone (507) 726-2808. Items must be returned within 14 days of receiving the item. All sales after 14 days are considered final. Return shipping is paid by the buyer. The buyer accepts a 20% restocking fee or the equivalent of our original shipping costs plus fees if that amount exceeds the 20%.  (Please understand that even though a listing may have offered Free Shipping, we are still charged by the courier. As such our shipping cost will be deducted from the refund if they exceed the 20%)


Electrical items are NON-RETURNABLE for 3 reasons.
#1 - People using the part for testing.
#2 - People installing them on an incorrect machine.
#3 - Our inability to re-test most electrical parts after they have been returned and the machine has already been torn down.
We will not re-sell anything that we can't assure our customers was in working order when they bought it.
  

International Buyers

All international bidders are welcome.  We ship most items via USPS Priority Mail to most countries and do not insure their ground service.  With higher priced or large oversized items we may have to use UPS or FedEx due to USPS limitations. This may cause higher shipping costs.  Please understand these extra costs on such items.  If an item does not have a shipping price for your country, please contact us and we can get you a quote.

Import Duties, Taxes, and Charges are not included in item prices or shipping costs.  These charges are the buyers responsibility.  Please check with you country's customs office to determine any additional cost before bidding or buying.  These charges are usually collected by the delivery shipping company or when you pick up your item.  These are not additional shipping charges.

We will NOT mark values lower or mark as gifts - US and International Government policies prohibit such actions!

Feedback and 5 Star Ratings

Benny's Powersports is a small family owned and operated business.  We work very hard to establish and keep a good reputation, and customer service is our #1 priority. We have no interest in short changing anyone in any way at all. With that being said, we are human and do make mistakes. If you feel you cannot leave 5 stars and good feedback for ANY reason, please give us the opportunity to make it up to you. Call us at (507) 726-2808 or email us with your issue. You are our VALUED customer and we will not take you for granted.


 

Pedigreed 1980 Porsche 933 (almost) ready to race for $15,000

Fri, 20 May 2011

Looking for a pedigreed piece of racing machinery on the cheap? One could do worse than this example of a 1980 Porsche 933, listed by our good friends at Bring a Trailer. They claim that this is one of sixteen 924 chassis cars factory-developed in Weissach, Germany, and delivered to Holbert Racing in Pennsylvania.

Peugeot 2008 Concept

Wed, 19 Sep 2012

Peugeot will unveil its new 2008 Concept at next week's Paris motor show, developed by design teams in Paris, Shanghai and Sao Paolo. The automaker has confirmed that the 2008 will go into production; first in France, then China and then Brazil as a global product. It comes after Peugeot displayed its Urban Crossover concept at this year's Beijing auto show, which bears an uncanny resemblance to the 2008.  The 2008 concept, which measures 4,140mm long and 1,730mm wide, is painted matte fluorescent yellow with dark chrome surrounding the now-familar floating grille and the air inlets integrated into the fender.

Mugen Honda CR-Z Hybrid – but don’t get too excited

Sat, 27 Feb 2010

The Honda CR-Z Hybrid gets the Mugen treatment Honda are trying to tell anyone who will listen that the Hybrid Honda CR-Z is a modern version of the Honda CRX. You know, all fun and sporty and nimble and on the right side of warm, but with all the green goodness people think they have to want. We haven’t actually come across anyone who buys in to the idea, but Honda aren’t giving up on the marketing pitch of the Honda CR-Z as the first ‘Sporty’ hybrid with the production version of the CR-Z debuting at Geneva next week.