Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Injectors

2003-2004 5.9 Injector Set (6) Dodge Cummins 5.9l Common Rail With New Nozzles on 2040-parts.com

US $1,074.95
Location:

Mansfield, Texas, United States

Mansfield, Texas, United States
2003-2004 5.9 INJECTOR SET (6) DODGE CUMMINS 5.9L COMMON RAIL WITH NEW NOZZLES, US $1,074.95, image 1
“1 YEAR UNLIMITED MILEAGE WARRANTY! OUR FEEDBACK & EXCEPTIONAL CUSTOMER SERVICE SPEAKS FOR ITSELF! NO UPFRONT CORE CHARGE!!!SEE CORE REQUIREMENTS BELOW!”
Warranty:Yes

WHAT SEPARATES US FROM THE REST?
Unlike our competitors we at DFW Injector disassemble and inspect all the components of every injector every time regardless of the injector showing signs of wear on our test bench upon arrival. We believe this important step along with our rigorous testing, inspection and rebuilding procedures is what keep's our injectors operating trouble free  year after year mile after mile. If you want it done right the first time give us a shout.

Available is our re-manufactured fuel injectors for a stock 5.9 Cummins for years 2003-2004. 

NOTE- We also carry fuel injectors for the stock 325 HO, 5.9 Cummins for years 2004.5-2007.  Please see our other adds or give us a call @ (817) 842-7072


WHAT YOUR PACKAGE WILL CONTAIN WHEN IT IS DELIVERED:
  • Our package will arrive with 6 re-manufactured injectors.
  • 6 install kits with rail seals. Injectors are ready to install straight out of the package.




OUR EXCEPTIONAL REBUILDING PROCESS:
  • We first inspect and test each injector solenoid and connector. We then clean, repair or replace the solenoid and/or connector as needed.
  • Injectors are completely disassembled and each component is microscopically inspected, including all internal and external components of the injector. 
  • The parts are then ultrasonically cleaned for a minimum of 8 hours (typically overnight) in our formulated cleaning solution.
  •  ALL internal and external parts are then mic'd and tested for any wear. Any faulty parts NOT MEETING OEM SPEC's found are replaced with OEM parts.
  • Main problematic parts are replaced regardless of signs of wear or malfunction.
  • Injectors are reassembled with NEW high quality nozzles.
  • Injectors have all new o-rings (internal and external), including the rail seals and copper washers and come out of the box ready to be installed. 
  • All refurbished injectors are tested under different several load scenario's to ensure injectors flow to OEM spec.
  • All injector set's are calibrated and flow matched to meet or exceed OEM spec's

*** PERFORMANCE BUILDS AVAILABLE****



CORE POLICY:

THE CORE TOTAL FOR THIS PURCHASE IS $750.00 HOWEVER WE DO NOT REQUIRE THE FULL AMOUNT UPFRONT. YOU HAVE MORE THAN A FEW OPTIONS.

1. YOU CAN SEND IN YOUR CORES FIRST. ONCE WE RECEIVE THE CORES, WE WILL SHIP YOUR ORDER.  PLEASE CONTACT US FOR A MAILING ADDRESS FOR THIS OPTION                                                                       

2. YOU MAY CHOOSE TO PAY FOR THE CORES UPFRONT VIA PAYPAL BY SENDING US $750.00. IF WE RECEIVE YOUR CORES BACK WITHIN THE 10 DAY PERIOD AND THEY MEET THE CORE REQUIRMENTS, WE WILL REFUND YOU THE FULL AMOUNT.

3. IF NEITHER OPTION 1 or 2 WORKS FOR YOU, YOU MAY CALL AND PUT A CREDIT CARD ON FILE WITH US. IF WE RECEIVE YOUR CORES WITH IN THE 10 DAY PERIOD YOUR CARD WILL NOT BE CHARGED. IF YOUR CORES ARE NOT RECEIVED WITH IN THE 10 DAY PERIOD WE WILL CHARGE YOUR CARD THE FULL CORE DEPOSIT AMOUNT OF $750.00

***IF CORES ARE RECEIVED PAST THE 10 DAY PERIOD THERE WILL BE A 10% FEE ASSESSED AND REMAINDER OF CORE CHARGE WILL BE REFUNDED ***

Full core credit of your deposit will be issued if:
• Cores are returned within 10 days of product ship-out date
• Cores are in original condition i.e. no external/cosmetic body damage
• Cores contain all internal components

Denial or partial core credit of your deposit will be issued if:
• Cores are damaged and/or lost during transit (you are responsible for transit damage)
• Broken/missing solenoid dividers
• Broken/missing electrical connecting studs
• Missing/damaged nozzles
• Missing external components
• Missing internal components
• Core tampering or suspected dis-assembly/assembly
• Cores are returned past 10-days of product ship-out date

RETURN POLICY:

We accept returns within 3 days of purchase. RETURNS ARE SEPARATE FROM WARRANTY POLICY. 15% restocking fee applies. After inspection of the return, if the item has been installed; item will be sent back to customer at their expense. Customer pays for return shipping charges. Seller will pay for replacement shipping. We will assume no liability for damages caused in transit. RETURNS MUST BE SENT BACK IN ORIGINAL PACKAGING UNUSED AND UNINSTALLED. 


WARRANTY:                    

                            ***HASSLE FREE 1 YEAR UNLIMITED MILEAGE WARRANTY - THE BEST QUALITY & SERVICE IN THE U.S.***


DFW Injector LIMITED WARRANTY POLICY-

DFW Injector, issues the following warranty on all DfW Injector products. This warranty is extended to the original purchaser of the product only, unless approved of in writing by DFW Injector. Our product is warranted to be free from defects in material or workmanship under normal use and service, for a period of ONE YEAR WITH UNLIMITED MILEAGE from the original purchase date. The obligation of DFW Injector under this warranty is limited to the repair or replacement of the defective unit. Repair or replacement of the unit shall be at the sole discretion of DFW Injector. The defective unit must be returned within 15 days of the failure date to be considered for warranty. WE WILL NOT EXCEPT WHOLE SETS OF INJECTORS TO EXCHANGE. ONLY PROBLEMATIC INJECTORS WILL BE ACCEPTED FOR WARRANTY WORK.

Any product that is not installed according to the manufacturer's guidelines is not covered under any warranty by DFW Injector. This limited warranty is in lieu of all other warranties, either expressed or implied. All obligations or liabilities of DFW Injector are expressly disclaimed, including but not limited to claims for R & R expenses, liability of consequential damages, down time, loss of revenue, or any other inconvenience cost.

Our product is intended to be installed by the purchaser of DFW Injector product. Any damage or defect caused by a third party installer is the sole responsibility of the original purchaser of the product. In addition, DFW Injector is not responsible for any R & R expenses, liability of consequential damages, down time, loss of revenue, or any other inconvenience cost relative to third party installers of our product.

DFW Injector assumes no liability or responsibility for pump failure that are the result of the use of fuels and/or additives not approved by the original manufacturer of the engine and/or vehicle.

This warranty does not apply to any part or unit that has been altered or repaired by anyone other than DFW Injector. Nor, to any product which has been subject to misuse, abuse, neglect, accident, improper installation, or damage from foreign material such as water or dirt. This warranty will only be honored at the facilities of DFW Injector. 

Fuel Injectors for Sale

Hamilton wins in Hungary

Mon, 27 Jul 2009

Hamilton takes McLaren's firts win of the season at the Hungaroring Hamilton passed Red Bull’s Mark Webber early in the race, and found himself at the front of the pack when Alonso retired after a botched wheel change saw him lose his front wheel. Despite the pressure from Raikkonen Hamilton never really looked in danger of losing the lead and brought the McLaren home in first place for the first time this season. Team mate Kovalainen came in fifth, making this McLaren’s best showing of the season.

Saab's new 9-5 (2009) leaks early: the first photos

Thu, 23 Jul 2009

By Tim Pollard First Official Pictures 23 July 2009 09:00 Breaking news: early shots of the new Saab 9-5 have leaked out early in Germany. These low-res photos of the new 9-5 were published online today – revealing an exec that trades on the style that has made Saab's greatest hits so distinctive.There's a hint of old 900 around the C-pillar, lending a dash of coupé style to what remains a defiantly four-door saloon to rival the Audi A6 and other execs. Note also how the side glass graphic slopes rearwards, in Saab's true cockpit style.The face of the new Saab 9-5 is distinguished by a much more dominant grille, with a pair of headlamps ringed with chrome (it works much better than on the current geriatric 9-5, don't worry!) and a prominent Saab name.

Lexus tops J.D. Power survey in the UK

Fri, 05 Jun 2009

Lexus tops the UK J.D. Power Survey for the ninth year running People who buy a Lexus are buying in to something very specific. They are willing to pay a premium price for a well-built car that doesn’t go wrong and which is quiet and compliant.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.04 s, 11813 u