Find or Sell any Parts for Your Vehicle in USA

2007 Mercury Outboard 225 Xs / Why Buy Used? on 2040-parts.com

US $9,250.00
Location:

West Sunbury, Pennsylvania, US

West Sunbury, Pennsylvania, US
Item must be returned within:14 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Restocking Fee:No Returns Accepted:Returns Accepted Return policy details: Brand:Mercury Race Engine(HP):225 Stroke:2-Stroke Country of Manufacture:United States

 

"OUTBOARD REBUILD"

#1 IN REMANUFACTURED OUTBOARDS & POWERHEAD REPLACEMENT

SINCE 1972 - OVER 35 YEARS IN THE OUTBOARD FIELD

877-983-2537


WE CAN SHIP TO MOST ANYWHERE IN THE LOWER 48 WITH OUR 85% DISCOUNT



YOU ARE BIDDING ON A 2007 MERCURY 225  XS BUILT BY MERCURY RACING .. REMANUFACTURED POWERHEAD WITH 1 Yr WARRANTY, If YOUR LOOKING FOR A BASS BOAT MOTOR OR RIVER ROCKET THIS IS IT !!!  MOTOR HAS LOW WATER PICK LOWER UNIT, LIGHT WEIGHT HOOD, TRIM/TILT


In this day of internet ads and so call remanufactured engines with buzz bomb paint jobs and so called "tune ups"... what are you getting ?? Was this motor sunk ? Was the engine patched back together? Was the Engine run in saltwater ?

Blackbird will give you the piece of mind knowing that we have COMPLETELY REMANUFACTURED our engines and back it up with a 1 year warranty!!! We have not found another "used" outboard dealer doing this!



ALL OUR REMANUFACTURED MOTORS 30hp to 250hp receive the same treatment whether it's a 1983 or a 2007 . Your as-new motor is completely machined by our ultra modern machines- no short cuts !!!

  • All cylinders machined and diamond honed
  • ALL surfaces machined then high pressure washed and cleaned
  • ALL NEW pistons are precisely fitted and plateau diamond honed
  • Crankshafts are remanufactured back to factory specs with NEW bearings
  • NEW oil pump, fuel systems are completely cleaned in our ultrasonic cleaner then computer re-calibrated
  • ALL injectors are all ultrasonic cleaned / back flushed and new seals are installed
  • All electronics & trim system are inspected and tested
  • The lower unit gets disassembled then factory clearances are checked along with all internal parts then its reassembled with new seals and waterpump
  • New thermostats
  • NEW BASE COAT & CLEAR COAT paint
  • NEW decals
  • We run your motor under power in our outboard test cell and is put it a through a preliminary break-in so when you receive your motor it's ready to go boating

WE ARRANGE SHIPPING by Fed-Ex FREIGHT exclusively and the utmost care is taken to ensure you receive your motor in good condition. NO HIDDEN FEES!!

FOR MORE INFO GIVE US A CALL 724-290-0509



I wanted to show just a few of our testimonials that we have received in the past 35 years of rebuilding and selling remanufactured motors and powerheads:

I bought a 1999 90 hp Rebuilt Johnson from you 1-1/2 years later this motor runs like a brand new one. Power-more than a new motor, starts every time and I fish in very cold weather and heat, never shuts off once its running.  Right after I bought this motor it developed a miss, one call to these folks and I returned to be treated very nicely and the motor was fixed by replacing a part, NO CHARGE!

I will never buy a new motor as long as these nice dependable folks are rebuilding outboards, I would recommend Blackbird to anyone who needs a rebuilt, you will be treated well and end up with a better than new motor, My life depends on this motor to get be back to the dock and it has.
Thanks for a product keeps working and if I ever need motor help, you's have my business. (James R - PA)

Just a quick note to say thanks again for the excellent service. I installed the YAMAHA 90 on my boat and it has been used four times since. It runs better than ever. It is quiter and it has more power. A special thanks to Brian and Stan for the work they did. I won't hesitate to recommend you guys.
(Doug T - GA)

I just wanted to thank Mike Sr. and everyone for the help you guys gave me with the trim tilt on my 2000 Johnson 50 hp out board. You guys completely rock. I got everything back on the boat yesterday, bled and filled the trim tilt unit and took the boat out. Everything is working perfectly. Thank you all again. I am recommending you to everyone I talk to who is looking to buy an outboard.
(Steve - FL)

Awesome rebuild! (Yamaha 225 VMAX) Better than when Brad bought the boat. We went out Tuesday and broke the motor in. It runs smooth as silk, better than when it was new. (Bill - Greenville, SC)

I bought a 1998 Mercury 150 EFI from your company in June of 2007, This engine has run like a top from day 1. I have sent three of my Bass Club friends up to have rebuilds done and all three used your "while you wait" service (in by 9 out by 4) and so far Blackbird Industries is batting 1000.
I just wanted to say thanks again. (RF - New Rochelle, NY)


Last year you guys rebuilt the powerhead on my 1993 Johnson 115. I take the boat out weekly and have not had a problem at all with the rebuild even after putting over 100 hours on the motor.
Mike, Jr and the ladies in the office were very helpful during the whole process. Thanks! (SG - Dry Prong, LA )

I may have had some anxiety in purchasing my Remanufactured OptiMax 225 sight unseen 6 months ago, but it has met all the claims Blackbird makes and it's exceeded my expectations after 50+ hours of off shore operation. It runs like new (strong and dependable)! Your recomendation of using Terry in Deland as an installer worked out great as well. He knowledge is vast and work is quality. I appreciate Mike keeping his word in all transactions like sticking to the trade-in-price on my old motor. I will surely recommend your product to all friends and associates.
Thank You. (JT - Clearwater, FL)

Thanks Blackbird for the rebuild on my 2002 175 Johnson outboard this thing is faster then ever. We got to there shop at 9am for a complete rebuild ( wile you wait ) Dan had our powerhead off in 30min , 5 hrs later i was heading home to Maryland with a complete rebuild. It has been 7 months and this motor is smooth and FAST we took mike's advice and had them do the mild mod's and man am i glad this picked up 400 rmp. from 5500  to now 5900, this thing will run with  225's all day long!! Ray from  Baltimore, MD

 


THE BEST, what else needs to be said, AAA+++, Unbeatable service and price!!!


2007 300ProXs Mercury High Performance 20 Bad Boy (#160405270097)



US $9,000.00




Porsche 911 Targa 4 (2014) first official pictures

Mon, 13 Jan 2014

By Ollie Kew First Official Pictures 13 January 2014 18:00 Upping the repertoire of current 991-generation 911 models to 16 (so far) this is the new Porsche 911 Targa. The new Targa is inspired by the ’60s classic, as you’ll spot by its all-new roof arrangement (no glorified sunroof Targas any more). The contrast-coloured roof-hoop returns, as does the dome-shaped wraparound rear window.

Brief 4 – GMC: CDN–GM Interactive Design Competition

Thu, 14 Aug 2014

Once again, Car Design News and General Motors are holding an Interactive Design Competition.There are five design briefs to choose from, each set by GM's design teams, and you're invited to submit your entry on the competition website: http://www.cardesigncontest.com/ The fourth of our briefs comes from GMC, GM's truck-and-utility-only brand, and asks you to design of the interior or exterior of a GMC show car to be revealed at the 2030 North American International Auto Show. Your design should focus on a future interpretation of GMC's ‘industrial sculpture' design philosophy. You'll need to bear in mind who the customer for this truck or utility vehicle is, and consider what is the purpose and application of the vehicle.

Driven: Renault Clio 4

Mon, 22 Oct 2012

Having pioneered the ‘small car, big-car features' trend with original version, Renault has sold over 12 million Clios since the model was launched in 1991. The box-fresh ‘91 Clio RT Renault displayed alongside its successors at the launch of the Clio 4 is testament to what a successful formula was struck. Will time be as kind to the new Clio 4?