2012 Toyota Camry Gentex Homelink Or Hl Compass Mirror Wiring Harness Kit on 2040-parts.com
US $29.95
Location:
Fort Myers, Florida, United States
Condition:New
Warranty:No
Manufacturer Part Number:n/a
Brand:Unbranded
Country/Region of Manufacture:United States
|
|
|
The purpose of this adaptor harness is to allow a 2012/2013 Camry owner the option of putting in a less expensive mainstream Gentex mirror. There's plenty of used Gentex mainstream mirrors out there that can be had for as little as $50. So why spend $250 on a new 50-GENK45ACAM mirror. It's not like the gentex mirrors are your typical throw-away electronics. There's not a day that goes buy that I don't see 15 + year old gentex mirrors for sale.
For sale is a new 2012 Toyota Camry Gentex Homelink Mirror & Homelink Compass Mirror Wiring Harness Kit with a wire cover. It adapts the toyota oem mirror connector found in the overhead console to fit the mainstream homelink mirror's pictured below.
You will need to advise me on if you have a 2 wire connector or 3 wire connector in your 2012 Camry's overhead console. The difference between the two is the 3 wire connector supports full time homelink where as with the two wire connector homelink only works with the key on.
Be sure to read the whole ad and look at the picture of the actual kit to see what you get in the kit. This works with both of the 10 pin gentex mirrors shown below:
This kit is not for temperature capable mirrors. Please check our other auctions. |
Since you’re looking at this auction you're probably considering buying a complete wiring harness verses extending a short pigtail. Or Maybe the mirror your buying has no harness or pigtail. The advantage of buying a complete harness is first you're not scrambling to find the correct wire to use. Even if you get the correct wire the extended wire connections should get soldered and shrink sleeves placed over them. With the kit are wire ties, solderless connectors for the connections to the vehicle harness, instructions, and even the obligatory wire cover.
Harness material quality is important too. Most parts supply wire and aftermarket kit wire is rated for 80 degrees C (175 degrees F). Most temp sensor wire loom is rated for 200 degrees or less. The current kits we are selling have Oem automotive spec (crosslink) wire and Oem spec loam. That's 125 degree C (255 degree F) wire and 300 degree wire loam for temp sensor kits. This is important because a car’s internal temperatures can exceed 175 degrees. Under hood temperatures often exceed 200 degrees so our wire loom is rated for 300 degrees and not the substandard 200 degree loom available. All our harness wire is Automotive crosslink wire, and not speaker wire or some other sub-standard wire. Crosslink wire is resistant to moisture, grease, oil, gasoline, and most acids and solvents. The other benefit of the crosslink wire is it's abrasion resistance. Why take a chance on inferior materials? Full instructions with professional support provided via email.
Thanks for looking
|
|
What the actual harness kit looks like (3 wire)
| |
|
|
| Quality, Payment, and Shipping Information |
Quality
- The auction parts are New and Tested on an actual mirror before shipping.
-
Some harnesses are made to order.... Shipments will be processed within 2 business days following the receipt of payment.
-
Support Questions are answered thru the email address on your receipt and not ebay messaging.
- Feedback is left every few weeks.. Please be sure to return the same.
|
Payment Options
For your convenience I accept the following forms of payment :
|
Shipping :
- Buyer is responsible for shipping costs listed in auction. Shipping is at our cost.
- Combined Shipment is available with combined payment only.
- Shipments will be processed within 2 business days following the receipt of payment.
- USPS Priority Mail or First Class is the shipment method.
| | | |
|
Aftermarket Harnesses for Sale
Sat, 02 Feb 2013
Car & Driver are reporting that Bentley’s new Design chief - Luc Donckerwolke – is scrapping the Bentley SUV Concept and starting again. Despite the less than friendly response to the Bentley SUV, Bentley went on to show it at both the Beijing Motor Show and Pebble Beach but made it clear that the SUV was just a concept; a work in progress. But the arrival of Luc Donckerwolke as Bentley’s Chief Designer appears to have signalled the end of the EXP 9 F concept completely, with Car and Driver reporting that Donckerwolke isn’t overseeing a tinkering with the EXP 9 F Concept, but is scrapping it altogether.
Mon, 13 Jun 2011
Canadian Grand Prix 2011 - Rain and Jenson. 'nuf said. There is no point reporting the 2011 Canadian Grand Prix as we normally would.
Mon, 03 Aug 2009
Lotus enthusiasts looking to wring a little more power out of their rides now have a potent option: a supercharger kit for the Elise and Exige models. The kits boost power in the naturally aspirated versions from about 189 hp to 218 hp and improve torque from 133 lb-ft to 155 lb-ft. Even better, this added power comes on quicker, with peak torque coming on at 5,000 rpm, rather than 6,800 rpm.
Metra lc-gmrc-lan-01 gm lan data bus interface with chime retention(US $19.50)
Beat-sonic slx-82aad amplifier integration module for 2001-11 lexus/toyota(US $234.00)
Universal 3 pol y harness cable splitter for bmw ac/radio trim retrofit(US $21.99)
Painless performance 20122 mustang wiring harness 1969-1970(US $879.99)
New! scosche ha09b aftermarket stereo wiring harness for 2003-04 honda accord ex(US $9.99)
Scosche hy12b wire harness to connect aftermarket receiver for 2010 hyundai(US $6.99)