21 Plate Hho Hydrogen Generator Sealed Dry Cell Kit. Watch Video on 2040-parts.com

IMMEDIATE PAYMENT PLEASE   *Note: See my other items for accessories Good luck and thanks for watching.

The Clear Liberator Quad-cell 21 plate high-efficiency dry cell electrolyzer complete kit.

 See our other listings for 11 and 16 plate kits. 

What you are bidding on is an assembled High-efficiency Quad-cell Electrolyzer. Complete kit. This is for the cell, bubbler, 3 quart reservoir, hose, fittings and wiring kit. This is the MOST EFFICIENT hho electrolyzer out there with an efficiency of  3-4 liters per minute production.

 We are the first and original here with the dry cell. See our feedback!!!

Our cells have 50% thicker gaskets than the others here on ebay. Our gaskets are .090"(3/32") neoprene gaskets not the thin .060" neoprene gaskets that almost all the other dry cells have. A thicker gasket is more desirable in order to keep more electrolyte between the plates for a more efficient and cooler operating cell as well as less potential for leaks and a better dielectric property than the thin .060"(1/16") gaskets. The gaskets are cut to enhance the gas flow and to keep the plates submersed in the electrolyte for the most efficiency from the 316 stainless steel plates as possible.

Endplates for this cell are 1/2" clear acrylic. This is far superior and stronger than the standard 3/8" acrylic.

  This includes an assembled sealed quad-cell elyctrolyzer with 21-4"X5" 316L stainless steel plates.  This is a professional cell and is for the expert experimenter. What you do with this is up to you. However...Keep in mind if you install this in a vehicle you should use a 30 amp Relay and a MAP/MAF sensor enhancer. I could not possibly know how much hose and wire you would need as every application is different. However... this does include detailed wiring diagram and instructions to get you going. take a look at our complete kit.

Disclaimer: Producing Oxyhydrogen gas can be dangerous and that seller excepts no responsibility for what or how you use this device and what the device may do to you, your property or another. By bidding on this device you accept this disclaimer in it entirety.

*BUYER BEWARE: Beware of false claims as I have seen many here on eBay about hho production. Ask the seller what the MMW or milliliter per minute per watt rating of their cell is and to prove it. If they can't show you a test like mine using the 1100 ml bottle and timed test of how fast it fills (19 seconds in my case) and show you a test of amperage and volts, how can they make claims of 1, 2, 3, 4 or even 5-10 liters per minute with a wet cell that has current leakage on every edge of the plates? Even if it is in a pretty clear acrylic box. It is still a wet cell that is INEFFICIENT. Even if it is a dry cell that claims 10 liters per minute. Ask for proof. If they cant produce it. It means they don't have it and they never did. My experience with this is 500 ml/min at best for 11-16 plates wet cell. The sealed dry cell is the only efficient cell available as it runs at about 95% efficiency due to minimal current leakage. Ask for proof. Don't get taken. Here's a thought. If you have to brake, excelerate or turn on a dime, what is happening with the electrolyte splashing around inside a wet cell? My guess would be that it is getting sucked into your engine. With a sealed cell with electrolyte/bubbler all in one container this will not happen.   Beware of false claims and ask to see proof.

The Liberty Industries, Inc. electrolyzer is the first and original dry cell here on ebay see our feedback rating.

Beware of false claims and ask to see proof.

*NOTE.  See our other listings for 11 , 16 plate cells and complete kits.

What you are buying

Kit contents,

1- assembled 21 plate 316L stainless steel Liberator quad-cell electrolyzer. Plate configuration  -nnnn+nnnn-nnnn+nnnn-. 

  Size-6.3"X 5.3"X 4" 

1- 3 quart electrolyte container/bubbler with screw cap and fittings. 

1- Clear 7.5"x2" clear heavy duty SCH40 bubbler with drain plug.

5-  15" 12 AWG wire leads w/heat shrink electrical connectors.

1-10' 9/16"X 3/8"isd clear vinyl tubing.

1- 30-40 Amp Wiring Kit (12 & 10 AWG wire, fuse holders, fuses,switch, relay, heat shrink connectors, terminals, splices and diagram).

1- 3/8 barb check valve.

6- Snap Grip acetal hose clamps (secures tubing in second).

7- 1/4"npt X 3/8" hose barbs

2- 1/4"npt plugs

This is an EXPERIMENTAL fuel cell. All sales are final,  All materials are warrentd to be of good quality and free from faults and defects for the period of ten days from day of purchase.

International Shipping avaliable contact seller for a price. Make sure you check all customs policies. Seller will not be held liable for items seized by customs. PAYPAL ONLY.  GOOD LUCK..!  

Check out my other auctions.   

PERFORMANCE VIDEO of 5x6 21 plate cell