4 Wheels Center Cap Screw Locks 1 3/4 Long .48 Inch Cone Tapered Head 8mm 42924 on 2040-parts.com

ONE PURCHASE EQUALS 4 SCREW LOCKS AND ONE KEY.

The stock number is 42924.

 

 

This is a listing for a BRAND NEW, SET OF 4, CHROME PLATED, CENTER CAP SCREW LOCKS that are a 8MM 1.25 thread pitch.

The thread length is 1 1/2 inches with an overall length of 1 3/4 inches.

These LOCKS have a .48 inch size head and have a CONE seating bevel.

 

THERE IS A THIN GROOVE DESIGNED KEY FOR SECURITY, INSTALLATION AND REMOVAL OF THE LOCKS. THERE IS A FLOWER TYPE DESIGN ON THE HEAD OF THE LOCK. THIS IS WHAT THE KEY FITS INTO.

 

WARNING---I CANNOT STRESS ENOUGH THAT YOU TEST TO SEE WHICH THREAD PITCH THAT YOU NEED. ALSO, MAKE SURE THE HEAD SIZE WILL FIT INTO THE SCREW HOLE

Check your cap to make sure you have a bevel and not a flat seat. Refer to the picture to see the bevel.

IF YOU NEED A DIFFERENT LENGTH OR THREAD PITCH, REFER TO MY EBAY STORE. These screw LOCKS are for the automotive and truck industry only. This beveled screw seat cannot be found in a hardware store.

 

WARNING--BE SURE AND SNUG UP THE LOCKS, BUT THERE IS NO NEED TO OVER TIGHTEN THE LOCKS. THESE SCREW LOCKS WILL FIT A VARIETY OF AFTERMARKET WHEELS.

 

 

THE LOCKS WILL FIT WHEELS THAT THE CENTER CAPS COVER UP THE LUG NUTS. THERE WILL BE A SCREW HOLE IN THE CAP AS WELL AS A PLACE ON THE INSIDE OF THE CENTER OF THE WHEELS WHERE THE SCREW THREADS.

THERE ARE TWO DIFFERENT SIZES OF THREADS, 5/16 INCH AND 8MM. THIS LISTING IS FOR 8MM .

IF YOU HAVE 5/16 INCH, E-MAIL FOR A DIFFERENT LISTING. SINCE, 5/16 INCH AND 8MM ARE SO SIMILAR AN EASY WAY TO DETERMINE YOUR THREAD PITCH IS TO GET A 5/16" NUT AND TRY TO SCREW IT ONTO YOUR EXISTING SCREW. IF IT SCREWS A LITTLE BIT AND THEN STOPS, YOU HAVE 8MM. IF IT SCREWS FREELY AND EASY, THEN YOU HAVE 5/16. THESE SCREWS WILL NOT FIT OEM FACTORY WHEELS.

Be sure this is the size that you need as screws that are too short or long can be a problem. I have many lengths available, so measure the thread length that you need.

 

 

 

WE HAVE BEEN IN BUSINESS SINCE 1946 AND WILL HELP WITH TECHNICAL INFORMATION IF YOU WILL EMAIL US.

ALL FREIGHT REQUIREMENTS ARE LISTED.

 

 IF YOU LIVE OUTSIDE OF THE USA, READ THE LAST PARAGRAPHS. I SHIP WITHIN 48 HOURS EXCEPT ON WEEKENDS.

 

OKLAHOMA RESIDENTS WILL HAVE TO PAY SALES TAX. THERE IS FREIGHT LISTED FOR THE USA ON THIS PAGE. IF YOU PURCHASE MORE THAN ONE ITEM, WAIT FOR ME TO SEND YOU AN INVOICE WITH COMBINED FREIGHT BEFORE YOU PAY.

I MOSTLY SHIP PRIORITY MAIL UNLESS UPS IS PROGRAMMED INTO THE LISTING. PLEASE PROVIDE AN ADDRESS FOR PRIORITY MAIL. PO BOXES, AND ANY ADDRESS WHERE MAIL IS DELIVERED IS FINE. PUERTO RICO, APO AND FPO ADDRESSES ARE THE SAME AS THE CONTINENTAL USA.

WE WILL DO OUR BEST TO PLEASE EACH AND EVERY PERSON WHO PURCHASES OUR ITEMS. IF WE MAKE A MISTAKE IN ANY WAY, IT IS NOT INTENTIONAL AND WE WILL CORRECT ANY MISTAKE THAT WE MADE. IF YOU MAKE A MISTAKE ON AN ITEM YOU PURCHASE, E-MAIL OR CALL ME. MY INFORMATION IS AT THE BOTTOM OF THE EBAY PAGE.

WE ARE VERY PARTICULAR WITH OUR SHIPPING. WE SECURE EACH AND EVERY PACKAGE AND GO OUT OF OUR WAY TO PROTECT YOUR ITEM.

 

 

 

THANKS FOR LOOKING