Find or Sell any Parts for Your Vehicle in USA

455 Oldsmobile Complete Performance Engine Aluminum Heads Intake Oil Pan Olds on 2040-parts.com

US $6,995.00
Location:

Yucca Valley, California, United States

Yucca Valley, California, United States
“THIS ENGINE IS NICER THAN THE EXAMPLES SHOWN IN THE PHOTOS. There are many other things done to this engine that are not listed due to space restraints. The Camshaft listed is THE BIGGEST RACING HYD Cam and matched Lifters for the Olds. If you want it can be changed out for any more 'street-able' camshaft with a nice lope to it, to match what you are putting the engine in at no additional cost. We want you to be happy with how the engine performs in your vehicle. The different cams cost us the same amount so we do this at no charge.
Surface Finish:Custom Painted Your Choice of VHT Color Country of Manufacture:United States Country/Region of Manufacture:United States Manufacturer Part Number:HP 455 OLDS Core Charge:Sold Outright = No Core Charge Brand:FULL RACE SUPPLY Part Brand:Oldsmobile UPC:Does not apply

 455 OLDSMOBILE COMPLETE
 ENGINE WITH ALUMINUM HEADS,
SHAFT ROLLER ROCKERS, FORGED PISTONS, ALUMINUM INTAKE, 7QT OIL PAN, AND MANY OTHER PERFORMANCE UPGRADES
READ THE PARTS LIST THERE IS A LOT THAT COMES WITH THIS ENGINE THAT IS NOT SHOWN IN THE EXAMPLE PHOTOS.
THIS ENGINE IS MUCH NICER THAN THE ONES SHOWN IN THE EXAMPLE PHOTOS.
YOU CAN BUY THIS  COMPLETELY REBUILT NEVER RAN ALL FRESH  PROFESSIONALLY BUILT 455  OLDSMOBILE  PERFORMANCE ENGINE AT A HUGE DISCOUNT FOR ONLY $6,995.00 ON THE BUY IT NOW 
ENGINE HAS ALL THE OILING SYSTEM MODIFICATIONS TO MAKE IT LIVE A LONG LIFE. PLUS THE PROPER PISTON TO WALL CLEARANCES TO PREVENT SCUFFING IN RACING OR HOT ROD STREET USE.  CUSTOM FITTING ALL PARTS AND DEGREEING THE CAM IS JUST PART OF THE BLUEPRINTING DONE ON THIS HAND FITTED ENGINE.
 GO AHEAD AND PUT A NITROUS OXIDE SYSTEM ON IT.
 
   This High Performance Oldsmobile LONG block is fully balanced and blue-printed. Features polished and shot peened rods, custom ground Nodular Iron crankshaft and TRW Forged Pistons .060. Has a debured block has been line honed with Milodon main studs, and decked to the crankshaft centerline. This short block engine including ENGLE cam and Anti Pump-Up lifters, Milodon true roller timing set, HV oil pump. ALUMINUM Heads with Stainless Valves, Roller Rockers, ARP Head Studs Engine is all fresh and ready to go for automatic transmission. For manual transmission WE HAVE ONE ENGINE READY TO SHIP NOW see notes below.
    Now just listed on eBay with a buy it now of only $6,995.00.
  This engine is set up for Automatic Transmission as a hot street strip car engine. Includes the Flexplate and Balancer it was balanced with.
MANUAL TRANS ENGINE USES DIFFERENT BLOCK & CRANKSHAFT ALLOW 4 WEEKS & ADD $400.00  = ONLY HAVE 1 CORE LEFT & INCLUDES THE FLYWHEEL WITH NEW RING GEAR

I DO NOT RECOMMEND ALUMINUM HEADS ON A OLDSMOBILE MARINE ENGINE. THIS ENGINE WITH K CASTING MARINE HEADS & BOAT GRIND CAMSHAFT IS $500.00 LESS and also includes a flywheel instead of a flexplate and a Milodon Marine Jet Boat oil pan. Oil pan for a 3 point or 4 point motor mount set up - your choice.
 
 
THE ENGINE WILL BE CUSTOM BUILT BY THE OWNER OF THE COMPANY PERSONALLY  WITH 38 YEARS EXPERIENCE BUILDING PERFORMANCE OLDSMOBILE 455 ENGINES.

THE ENGINE IS PAINTED TO YOUR COLOR CHOICE WITH VHT BRAND ENGINE ENAMEL .
 
Long Blocks with oil pans and intakes installed are shipped on a engine support / transport fixture at no charge. Buyer gets to keep the fixture and the pallet.
WE MAKE NO PROFIT ON SHIPPING AND DO NOT CHARGE FOR CRATING OR HANDLING ON COMPLETE ENGINES
WE OFFER COMBINED SHIPPING THAT MEANS FREE SHIPPING ON ANYTHING YOU BUY THAT FITS ON THE CRATE WITH THIS ITEM.
 WE WILL SEND A COMBINED INVOICE TO YOU. SO SAVE YOURSELF SOME MONEY PLEASE SEE OUR EBAY STORE AND OTHER AUCTIONS  FOR MORE RACING PARTS.
 YOU MAY MAKE A DIRECT SECURE CARD PAYMENT CALL  760-228-1338 
 FULL RACE SUPPLY  CARRIES 387 PRODUCT LINES OF CUSTOM AFTERMARKET AND PERFORMANCE PARTS AT WHOLESALE PRICES AND HAS BEEN IN BUSINESS FOR OVER 34 YEARS
 

QUANTITY

DESCRIPTION

PART #

PRICE

8

1

Pistons Forged   9.8 to 1 compression

Piston Rings Moly

TRW / Speed Pro

Speed Pro / Sealed Power

L2323F-030

R1037430

$398.80

$118.90

2

 

Aluminum Heads SS Valves Springs Retainers Locks Assembled By Full Race Supply

SpeedmasterCastings

FRS Custom

$1,750.00

1

Main bearings CL77

Clevite

MS804P-10

$121.58

8

Rod Bearings CL77

Clevite

CB542P-10

$105.28

1

Cam Bearings HP

Federal-Mogul

1234M

$32.95

1

True Double Roller Timing Set 

Milodon

15012

$78.98

               1


              1

High Volume Oil Pump

Oil pump drive shaft 4130 Chrome Moly

Melling


Milodon

  M22 FHV

  22575


       $113.82

       $26.80

1

1

Main Stud Kit

Head Stud Kit with 12 point nuts

Milodon

ARP

     81215

185-4201


$94.68

$179.83

1

Rod Bolts

ARP

185-6001

$78.54

1

 Brass Freeze Plug Kit

Pioneer

PE-124-BR

$18.58 

1

 

1

Camshaft  Dur at .050 252/263  Lift 560/575  LC 106  Or your choice of Camshaft Grind or brand

Hydraulic Lifters Anti Pump Up Flat Tappet

Engle

 

Crain

     JM-30

 

99282

 

$189.95

 

$108.67

1


20

1

1

1


1

Chrome Valve Covers Pair with Baffles

V/C Bolts & Washers Stainless Allen

Timing Cover Powder Coated

Timing Tab Powder Coated

Aluminum Water Pump H/V

TC/WP Bolts & Washers Stainless Allen

FRS

FRS/Abba

Oldsmobile

Oldsmobile

Speedmaster


FRS/Abba

455 Tall

1/4 X 3/4

FRSTC455

FRSTT455

HVWPOLDS

FRSWPKIT

 

 

 

$63.88

$25.60

85.00

$18.00

$199.00

38.44

1


1

Overhaul Gasket Set / Special Set for Aluminum Heads & Intake Manifold

Rear Main Seal Poly Acrlic

Full Race Supply Custom


SCE

OLDS HPA


17905


$138.00

$26.96

1

1

Hi Temp Engine Paint COLOR YOUR CHOICE

Flame Proof Coating Clear

VHT

VHT

SP-13?

SP-115


$7.48

$9.87

1

1

Flex Plate 

Harmonic Balancer

Pioneer

Pioneer

FP-OL66

DA-4552

            $52.66

           $149.97

1

1

1

Oil Pan 7 Qt Street / Strip 

Oil Pump Pickup for above pan

Oil Pan Bolt Kit

FRS

FRS

FRS

7QTOLDS

7QTPUOLDS

OLDSPAN


$141.27

$48.24

$23.95

1

1

SHAFT Roller Rockers 1.6 Ratio for 7/16 studs

Chromoly  Pushrods Hardened

FRS

FRS

S-5003

Custom 


$302.95

$168.00

1


12

Intake Manifold Aluminum Air Gap Show Polished

Intake Bolts with Washers 12 Point Stainless

Speedmaster 'May have hood clearance issues on some cars

ARP

27025

3AJ1-250-3

$4.24ea

         $389.29

           $50.88



TOTAL PARTS



$


Labor and Machine Work





1

Furnace Clean & Crack Check Block Bottom Tap all bolt holes




$120.00

8

Bore to Crank Centerline Finish Hone for Moly Rings




$180.00

             1

Balance Rotating Assembly with Flex Plate & Harmonic Balancer



         $180.00

8

Resize Rods w/ Rod Bolts Polish & Shot Peen

clean & mag

Balance Set


$320.00

1

Line Hone Block with Main Studs

$180.00

1

Crank Job = Clean Mag Turn Champer

Micro Polished

Index Stroke

$180.00

1

Square Deck Block to Crank Centerline

$180.00

                1

Blue Print and Assemble To Complete Engine with custom paint

Degree Camshaft

$1,500.00



LABOR



$



Sub Total

Parts Above


        $



 



  


 

GRAND TOTAL



$


 CORE CHARGE

 $600.00

normal passenger car engine core


  NONE


Shipping to USA Example = CA to NY $500.00




 INCLUDED

 
WE OFFER COMBINED SHIPPING THAT MEANS FREE SHIPPING ON ANYTHING YOU BUY UNDER 100 LBS THAT FITS ON THE CRATE WITH THIS ITEM.  WE WILL SEND A COMBINED INVOICE TO YOU. SAVE YOURSELF SOME MONEY SEE OUR EBAY STORE AND OTHER AUCTIONS  FOR MORE RACING PARTS.
 YOU MAY MAKE A DIRECT SECURE PAYMENT CALL US TOLL FREE  760-228-1338
 FULL RACE SUPPLY HAS BEEN IN BUSINESS FOR OVER 34 YEARS BUILDING CUSTOM MARINE AND RACING ENGINES.
HOME OF THE TOP SECRET RACING TEAM'S TOP ALCOHOL DRAGSTER ( SUPERCHARGED FUEL INJECTED ON ALCOHOL)
WE ARE ALSO THE SHOP THAT RAN 6.88 AT 198 MPH IN THE 1/4 MILE WITH A 455 OLDS BASED ENGINE THAT WAS SUPERCHARGED FUEL INJECTED ON ALCOHOL FUEL. THE OWNER KNOWS HOW TO MAKE OLDSMOBILE'S GO AND LIVE UNDER EXTREME CONDITIONS.
 WE BUILD 10 TO 12 OLDSMOBILE ENGINES A YEAR FOR CUSTOMERS 
WE HAVE RUN AN OLDS IN OUR OWN JET BOAT FOR OVER 30 YEARS    
 FULL RACE SUPPLY  CARRIES 387 PRODUCT LINES OF CUSTOM AFTERMARKET AND PERFORMANCE PARTS AT WHOLESALE PRICES FOR OVER 34 YEARS.
YOU CAN MAKE A SECURE CREDIT OR DEBIT CARD PAYMENT CALL US   760-228-1338  
 
WE DO NOT CHARGE FOR CRATING - But it will take a few days to get it done right.
YES WE WILL SHIP IT TO 'YOUR' FREIGHT COMPANY FOR WORLD WIDE DELIVERY. 

SHIPPING TO AUSTRALIA AVERAGES $400.00 - $500.00  DEPENDING ON WHAT PORT IT GOES TO.
TAKES  3-4 WEEKS
WE ARRANGE
SHIPPING TO AUSTRALIA AT NO CHARGE ( WE SHIP A LOT OF ENGINES AND PARTS TO AUSTRALIA )
 
 CALIFORNIA BUYERS WILL BE CHARGED STATE SALES TAX ON THE PARTS AS REQUIRED BY LAW BUT WE WILL MAKE IT UP FOR YOU IN THE FORM OF A REBATE ON THE SHIPPING. WE DO NOT MAKE A PROFIT ON SHIPPING IS OUR POLICY.

PLEASE NOTE SOMETIMES DUE TO CUSTOMER REQUESTS WE HAVE TO CHANGE BRANDS AND PART NUMBERS TO AN EQUAL OR BETTER QUALITY PART DUE TO AVAILABILITY OF PARTS

Opel Ampera concept car (2009) first photos

Tue, 27 Jan 2009

Opel Ampera By Tim Pollard First Official Pictures 27 January 2009 09:37 Vauxhall/Opel today announced the new Ampera concept car – a European version of the Volt petrol-electric plug-in hybrid. The Ampera will be the big news for GM’s European arm at the 2009 Geneva motor show (assuming GM is still in business by then, of course). The Ampera is designed around GM’s newly christened Voltec plug-in hybrid technology.

Watch the 2015 Cadillac Escalade reveal live video

Mon, 07 Oct 2013

Meet the new 2015 Cadillac Escalade. Following up on last week's interior teaser shot, Cadillac is unveiling their newest luxury SUV at a soiree in New York City where designers are giving the full rundown on the next-generation Escalade. The show starts at 7:30 pm EDT.

MINI John Cooper Works Coupe Endurance at Nurburgring 24 Hours +video

Fri, 24 Jun 2011

MINI John Cooper Works Coupe Endurance- off to the Nurburgring It did take a while to drag the MINI Coupe – screaming and kicking – in to the limelight. Too shy to arrive fully formed, MINI revealed the Coupe at the start of the month with a modesty blanket of black and white swirls over its money shot – the helmet roof and proper little boot. But it took just two weeks for the new MINI Coupe to pluck up the courage to strut its stuff undisguised, and we were treated to a photo avalanche to celebrate its arrival.