4x Water Proof 12 Smd 5050 Led 30cm Auto Car Light & Household Indoor Strip Blue on 2040-parts.com

　

Current Fixed Version and please do not compare our item with other low quality Made in China products

　

　

  

　

　

 

WATER PROOF  LED LIGHT STRIP 12 5050 SMD 30CM CAR/MOTORCYCLE/SCOOTER USE FOR PLATE LIGHT, EYE LID LIGHT, INTERIOR & EXTERIOR DECORATION DC12V

Max. 300 LM @ 12VDC

　

• This strip can be various applications depends on which vehicles, install wherever you want.

　

　

BLUE

 

　

---

　

• Make sure item SIZE (Width & Length indicated in photo of description) and Voltage(12V-CAR/MOTORCYCLE ; 24V-TRUCK) are fitted

• This is an International Sales and there is no possibility to have the same delivery time as your local seller.

• Product Emitting Photo was shot in a dark room, the real brightness is determined by the real circumstance.

• Please make sure this emitting color is legal in your place, we are not responsible for any buyer's local law problem

• Please read all information in description CLEARLY

　

• High Brightness

• Water Proof

• Emitted Color: BLUE

• DC 12V for CAR/MOTORCYCLE/SCOOTER USE FOR PLATE LIGHT, EYE LID LIGHT, INTERIOR & EXTERIOR DECORATION May vary from different vehicles

• Long life span

• Plug and work directly

 

• Endurance Voltage Range: 10~18V

• LED Type: 5050 SMD 3 Chips in one LED (What it is?)

• LED Qty:12PCS(36 Chips)

• Adhesive tape attached(3M or Other Brand in Japan)

• CE & RoHS Approved

• Approx. Lumen: 300Lumen

• Real Consumption Wattage @ 12.8V Approx.= 1.8W

• Flexible, can be connected/cut per 3pcs LED by user's need (extra wire needed ):

　

　

DASH BOARD ERROR MESSAGE --This LED Light may Not work properly on latest/European cars with OBC CANBus wiring system (shows Error message)

Please be advice that many modern luxury cars which computer built in such as Mercedes Benz, BMW,. etc., have sensors built into the dashboard computer system that can detect if light bulb works. However the purpose to use LED BULB is energy saving, which means the car computer will misjudge the LED BULB not work because of the low wattage to lead the error signal showed in your dashboard. Basically the bulb can be judged OK when the wattage goes up to 5 Watt and above, all LED BULBs themselves have nothing to do with this problem except you install resistor to enlarge the wattage

        FLASH SPEED FOR SIGNAL/TURN LIGHT APPLICATION--

    Normally when you flip your turn signal switch, the light blinks at a set, slow pace. However, if you have modified your lights to use LEDs, you'll notice that the turn signals now blink very quickly. This is caused by the low resistance of the LEDs due to the fact that they use less energy. To correct the problem, you'll need to wire the turn signals in a parallel circuit. To do this, you'll be installing a resistor or control flasher.

---